Parts

One of the most successful and hard-working RockShox forks of all times capitalizes on the innovations born from the latest SID. A chassis that combines classic XC performance with light trail duties and a Motion Control damper completes the package, making Reba as capable as ever before. - Proven Motion Control damper featuring low speed compression adjust to lockout with external rebound adjust - Torque Caps compatible for a stronger, stiffer interface between fork and hub, giving you more control in the front wheel - Accepts Bottomless Tokens to easily custom tune the air spring performance to best match you own riding style and suspension preference - Solo Air spring for a plush, predictable ride you can set up in seconds

The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

- Super Record disc brake shifter/brake lever and caliper - Pre-assembled, with pre-bled hydraulic housing - Adjustable lever reach - AMS system allows adjustments of the modulation and lever travel - Vibration-canceling brake pads for quiet performance - Magnetic return spring - Ultra-Shift mechanism allows multi-shifts in both directions (4 up, 5 down) - Weight: 697g per pair (levers, hoses, calipers and fluid)

Red BB30 Crankset by SRAM

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Stages Carbon and built to retrofit SRAM (road and mountain), Race Face, and Easton cranks with Stages Power, with added spindle purchase. No additional spindle purchase required for FSA 386EVO cranks. This one Stages Power meter is built to rule them all—all of the most popular 30mm spindled crank sets, that is. Interchangeable 30mm spindles bring Stages Power carbon to numerous popular crank sets. In order to fit a vast array BB30 based crank sets—including, SRAM, RaceFace, and Easton, as well as FSA’s 386EVO —Stages' engineers have developed a range of bottom bracket spindles that serve to mate our super-light carbon Stages Power meter to more than 10 different 30mm spindled crank sets. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

When you're riding full tilt into a steep banked turn, you need to have faith in your gear. You can trust the FR 1950 CLASSIC in any situation. The 30mm rim width offers your downhill tires unparalleled lateral support for even more speed when cornering, and the increased volume allows you to reduce your tire pressure and get traction like never before. The rim design, lightweight 240s hubs, and the DT Competition spokes have proven their robustness on the world's toughest downhill trails, bolted onto bikes ridden by Danny Hart and Loic Bruni. Whether you're riding against the clock or just for fun, the FR 1950 is perfect for all of you who've got something against braking.

With multiple World Championship medals, EWS series wins and Olympic gold medals to its name, our XX Eagle cranks set the standard. The XX Eagle T-Type Wide crankset is the evolution of that standard. Carbon fiber engineered with a foam core to give both incredible strength and maximized stiffness. The XX Eagle Transmission crank also features a first-of-its-kind removable and replaceable bash guard system that riders will appreciate. - Carbon crank arms with foam core are extremely lightweight and provide maximum stiffness - Includes XX T-Type removable and replaceable 2-Guard aluminum bashguard to protect your chainring when riding rough terrain - 55mm Chainline - 174mm Q-factor - DUB bottom bracket and spacers NOT included

From downhill racing to extreme freeride, the RockShox Vivid R2C combines extreme durability with the precise adjustments that matter when you're going big. Laser-etched controls let you dial in beginning and ending-stroke rebound as well as low-speed compression. Rapid Recovery allows the shock to recovery faster between consecutive bumps, letting the wheel track the ground with greater precision. - Intended Use: Downhill - Counter Measure for zero force stroke initiation - Dual Flow Adjust absorbs big hits while staying active through small hits - Switch for on the fly toggle between full and open compression - Eye to eye length: 240mm / 9.5 inches - Stroke: 76mm / 3 inches - Eyelet Diameter: 12.7mm - Positive Spring: Coil - External Adjustments: Rebound Damping , High Speed Compression Damping , Low Speed Compression Damping * Spring sold separately

The legendary Vivid is like a “Trail Whisperer.” Even in the most impossible situations, RockShox's most rugged coil shock always knows just the right way to get it done. Any trail, any time. Nothing shakes the Vivid’s confidence. From downhill racing to extreme freeride, the Vivid combines extreme durability with the precise adjustments that matter when you’re going big. Laser-etched controls let you dial in beginning and ending-stroke rebound as well as low-speed compression, making this shock fly through rock gardens as smoothly as it absorbs a sudden drop in altitude. - WEIGHT: 468g - DAMPING: External beginning stroke rebound, ending stroke rebound, low speed compression - CONFIGURATIONS: 200x57mm, 216x63mm, 222x70mm, 240x76mm, 267x89mm - SPRING: Steel coil - SPRING ADJUST: Preload - SHAFT MATERIAL: 7075 aluminum - BODY MATERIAL: Forged aluminum - BODY FINISH: Hard anodized - OTHER: *Weight based on 222x70, no coil, no hardware

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hubs, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

Direct power transmission in every riding situation—240 with Ratchet EXP. With the latest generation of the 240 hub, the strengths have been further enhanced. The latest Ratchet EXP freehub system increases the bearing lifetime thanks to the increased bearing distance. The new version of the end caps simplifies tool-free disassembly and makes maintenance easier. The hollow-machined ratchets transfer your energy directly into acceleration thanks to the 36 teeth.

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

Your time on the bike is precious, let Shimano make it even better. Ultegra ST-R8170 brake levers bring enhanced modulation and control to every ride by employing Shimano's proven SERVO-WAVE technology. The Di2 platform untethers the shifters while delivering fast and reliable wireless shifting. BR-R8170 disc brake caliper brings a new level of control to the road cycling world with improved modulation and a quicker initial braking point. Despite its smaller construction, the system is quieter than ever and easier to maintain. - The wireless connection provides a clean cockpit, enhancing the aerodynamic effect and easy maintenance - Wider pad clearance decreases brake noise - Maintenance-friendly bleeding process - Unparalleled ergonomic features, such as raised hood peaks on levers - Brake control is optimized with light and smooth lever action - Enhanced modulation thanks to an expanded braking control area - Compatible with wireless or wired connection

The new Gen 3 single-sided Stages Power L meter is built on to a non-drive-side Shimano Dura-Ace R9100 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the data produced by our system. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box: - Power Meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

If you believe in better performance then you should believe in hydraulic road (HydroR) brakes. SRAM's award winning HydroR technology is the fulfillment of the promise of better braking, more control, and improved performance in all conditions. SRAM RED is delivering on the promise of braking confidence and security that brings speed control and stability to a new level. - RED ergonomics including Reach Adjust - SRAM Road 11-speed compatible - Optimized power and modulation for higher speeds and more control - Refined lever body design is more comfortable - Easy access bleed port means convenient service - Shift paddle design is lightweight and offers improved finger clearance - Moto-style means this is a right-side (rear) shifter with a front brake, the reverse of the normal American-style. - Front brake hose length is 950mm, rear brake hose length is 1800mm

The do it all wheels - bringing high end tech into an affordable wheelset. Mountain bikes are becoming longer, slacker, and faster. The M 1900 SPLINE 30 is their answer to these developments. The rim is very durable and offers a 30mm rim width, which greatly reduces tubeless tire burping and allows you to decrease the tire pressure to keep you in greater control. Twenty-eight cold-forged spokes tension the rim in a DT Swiss straight pull hub to provide the ultimate balance of light weight and stiffness. No matter how steep or how rocky your trail, the M 1900 SPLINE is more than up to the challenge. PLEASE NOTE THESE WHEELS FEATURE 6-BOLT ROTOR MOUNTS and NOT CENTER LOCK as pictured

Performance Creativity For the aficionados and the geeks and the fanboys and the freaks, a custom-painted crank is a place of pride. A painted hammer. A beautiful ax. Troy Lee and his team channeled the future of camo to design these cranks, and the future in the stiff, durable world of SRAM cranks is looking exceptionally bright. Specifications: - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Chainring Size: 32 - Crank Arm Length: 165mm, 170mm, 175mm - Chainline: 52.0mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD: Direct Mount (DM) - Crank Arm Material: Carbon

For the artist, the challenge of the solution is the inspiration to create. The crank arm-perfected in performance by SRAM engineers-is a utilitarian canvas begging to be transformed. Troy Lee, design artist, took to that canvas. And now, those of us who have seen can never unsee. It's the crank, made more. Same same. But forever different. - DUB73 version available in 165mm with a 32t Direct Mount X-SYNC2 Chainring - DUB83 version available in 165mm or 170mm with 36t Direct Mount X-SYNC2 CNC Chainring - Available in Camo Red or Camo Black

With bigger bikes there comes bigger demands. Thankfully, we created the 35 Gold to meet all of them, both in performance and value. Whether you have an E-MTB or MTB, the burly 35 Gold checks the box with our proven DebonAir spring and Motion Control damping. And new this year is an E-MTB-focused option with mounting points for optional full or short fenders. All told, you might wonder how we packed so much quality and performance into such a wallet-friendly package. Features - New E-MTB endorsement options with fender mounts are appropriate for all E-bikes (1.8" taper available) - New graphics are easy to read and make a fresh impact - Motion Control damping featuring low-speed compression adjustment to lockout - Highly tunable DebonAir spring offers a consistent feel throughout the travel - Fits Tires up to 2.8" (without fenders; the use of a full fender will reduce tire clearance) - Fast Black finished 35mm aluminum upper tubes couple stiffness and lightweight with a premium look - Offset: 44mm

The XG-1299 cassette completes the expression of the world's most accomplished and sought after bikes. Designed for use with our proven, reliable XD driver body, this 12-speed cassette offers a massive gear range. In independent tests, the X-Dome architecture is proven to yield the strongest cassette on the market. New shifting characteristics improve both inboard and outboard shifting as well as chain retention. - SRAM’s cassette manufacturing technology provides the greatest durability and lightest weight - All-new shifting features create a smoother, quieter system with enhanced inboard and outboard shift performance - XD driver body compatible Cogs - 10 – 50T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 50 - 10 – 52T: 10, 12, 14, 16, 18, 21, 24, 28, 32, 36, 42, 52

Premium performance at down-to-earth prices. Judy now includes all of the 30mm MTB and E-MTB forks, with axle and steerer options to match any spec. Gold level gives you aluminum upper tubes and Motion Control damping. Features - New graphics package with E-MTB endorsement option (15x110mm) - Motion Control damping featuring low-speed compression adjustment to lockout - Fits Tires up to 2.8" - Fast Black finished 30mm aluminum upper tubes couple stiffness and lightweight with a premium look - Highly tunable Solo Air spring

Ride with confidence knowing that your power meter will not quit when you need it the most. Enjoy up to 200 hours of ride time in any weather condition with its IPX7 waterproof rating and 10k temperature compensation; if harsh climates do not hold you back, then you need a product capable of rising to the occasion. That is exactly what the DZero DUB power meter is made for. Train harder, ride faster and unlock your ultimate potential.  - Specifically designed for use with XX SL Eagle T-Type Thread Mount chainrings (Sold separately) - AXS™™ enabled for easy monitoring and firmware upgrades - Bluetooth Low Energy and ANT+ compatible - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Uses a common CR2032 battery that last for 200 riding hours and changes without tools - Power-upgrade compatible with the following RED® and Force eTap AXS™™ cranksets: RED 1x: 36T-46T, Force 1x: 36T-46T, Force 2x: 33/46, 35/48

The SRAM RED shift-brake controls feature a fresh new look and continue our philosophy of perfecting the interface between rider and bike. We have scrutinized everything, including the transition between handlebar and hoods, the grip texture, finger wrap, and the separate interfaces with both the shifter and brake lever. The result is an extremely comfortable, highly individual fit that makes the shift-brake controls feel like a natural extension of the rider. - SRAM Road 11-speed compatible - New clamp allows better fit and adjustment for modern carbon and ergo bars - Designed for Yaw front derailleurs - ErgoFit textured body improves grip and finger wrap with reduced diameter, providing better control and a better transition to the bar - Individual Reach Adjust of brake and shift lever is easy to access and uses a standard hex key, putting the controls exactly where you want them - Larger carbon ErgoBlade lever improves shifting from the drops - DoubleTap technology delivers both shifts from a single lever - ZeroLoss shifting means shifts engage immediately - Compatible with cable brakes

DBair IL is a twin-tube inline air shock with superior performance and reliability. The first shock to feature Cane Creek's LinEair Spring, the DBair IL is the best of both worlds, an air shock that feels more supple, linear and seamlessly supportive throughout its travel. - 4-Way independent adjustment - high and low speed compression, high and low speed rebound - Twin-tube damping for unparalleled small bump compliance - Climb switch lessens low-speed compression and rebound damping at the same time for improved climbing traction - Hand assembled and Individually dyno-tested

The new Gen 3 single-sided Stages Power R meter is built on to a drive-side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. Single drive-side power meter increases frame compatibility or upgrades an existing Stages Power L meter to Stages Power LR. Stages Power R offers increased compatibility with direct mount brakes and frames that lack adequate chainstay clearance, as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR bi-lateral (dual) meter systems. Additional features: - ± 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications - Power meter housing: low profile design, 2x phillips head screw to access battery compartment - Weight: Only adds 20g to base crankset - Battery Life: 175+ hours (via coin cell: CR2032) - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 In the box - Drive-side power meter - High quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrades. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

Record 12-Speed controls are aesthetically pleasing and functional. The unidirectional carbon design offers riders two different lever-handlebar positions to adapt different size hands, maximizing control. This results in consistent power, stiffness and reliability for when you need it. - Hydraulic disc brake actuation - Vari-Cushion technology offers an ergonomic, comfortable and safe support and grip - The “one lever-one action” feature assigns each lever one function to prevent shifting errors - Ultra-Shift mechanism enables upshifting up to three gears at a time, and downshifting a full five - Disc rotor sold separately Specifications: - Pad Compound: Semi-Metallic - Brake Caliper Mount: Flat Mount - Brake Lever Use: Right - Hydraulic Fluid Type: Mineral Oil - Rear Der/Shifter Compatibility: Campy 12-Speed Chorus/Record/Super Record 2019+ - Drivetrain Speeds: 12 - Adjustable Reach: Yes

You asked. We listened. eTap is now available for Force. SRAM Force eTap AXS offers the key features of RED eTap AXS—modern gearing, advanced chain management, and easy personalization, all in a more affordable package. Exploring new limits has never been easier. SRAM Force eTap AXS—Simply Beyond. Includes: - Rear Derailleur, 36T Max - Cassette: XG 1270 D1 10-36T - Force D1 Chain, 114 links - Chaingap Gauge