Parts & Accessories
Kryptonite's Transit FlexFrame U-Bracket makes it easy to carry your U-lock on your bike so it's always handy. This simple mount fits on frame tubes from 25 to 80mm in diameter and it accepts most 13 and 16mm-diameter round-shackle U-locks. Plus, the clamp rotates so you can perfectly align the lock with your bike to keep it tucked out of the way.
Accessory for transporting U-locks with the TexKF Twin or RBKF Twin brackets. - 12mm works with 460 and 470 U-locks - 13mm works with 54 and 540 U-Locks
$19.99 - $29.99
Seat collar only! Works with the Pinhead seatpost lock. Anodized aluminum, laser engraved. Fits either 1) 31.8 mm (1.25"") and 28.6 mm (1.1") diameter seat tubes. 2) 34.9mm diameter seat tubes.
$34.99 - $59.99
Locks your solid axle wheel/wheels to your frame. Locknuts replace standard axle hex nuts (M9, M10, 3/8") Protect your wheels for a fraction of their replacement cost. Single: Includes one lock nut and one coded key Pair: Includes two lock nuts and one coded key Make sure you select the correct axle diameter, 9 mm or 10 mm or 3/8". Order matching locks and replacement keys at pinheadlocks.com
$9.99 - $19.99
Abus Shackle clamps are designed to work in conjunction with the EaZyKF bracket for revolutionary U-lock mounting on your bike. Make sure to select the correct model of shackle clamp designed for the corresponsing u-lock. The EaZyKF bracket is sold seperately.
These adapters are for mounting rear wheel locks to the bike frame.
This bracket is for convenient carrying of Steel-O-Flex, cable, and coil cable locks - Enables transporting the lock on the seat post, on the frame, or on the rack stays - Compatible with frame diameters of 15 - 55mm - Simple mounting without tools - Model: combo
Kryptonite's Transit H-Bar Carrier securely holds your lock on your bars so it's always at the ready. It fits most handlebars from 22 to 32mm in diameter and works with pretty much any U-lock on the planet, from standard ones to the super-fat New York Fahgettaboudit. It also works with cable locks for the ultimate in carrying convenience.
This bracket is for convenient carrying of Steel-O-Flex, cable, and coil cable locks - Enables transporting the lock on the seat post, on the frame, or on the rack stays - Compatible with frame diameters of 15 - 55mm - Simple mounting without tools
This plastic bracket is designed for the mounting of the 540 u-lock. - Works on round frames with a diameter of 15 – 35mm - Can be used to mount the lock within the frame or on the side
$13.99 - $14.99
The OTTO Mount is an accessory for on-the-bike carry of OTTOLOCK. It's made of flexible silicone and has four ladder-strap hooks to ensure a snug, secure fit for multiple places on your bike. Note: Make sure all four hooks are engaged with your OTTO Mount ladder strap, and you position the OTTOLOCK head weight near the clamp to ensure you do not lose your OTTOLOCK. - Recommended for the 18" OTTOLOCK only - Flexible inner fit-up diameter accommodates 1 – 2" (25 – 51cm) round bicycle tubes - Material: silicone
This bracket is for convenient carrying of U-shackle locks - Mounts on round frames with a diameter of 28 - 36mm - Includes screws in two different lengths - Plastic bracket for mounting with rubber inlays for a secure hold - Index marks on the bracket to simplify subsequent mountings - Comfortable one-hand operation - Very quick mounting
Greatly reduces the chance of wheel or seatpost theft by replacing your existing quick-release wheel and seat clamp skewers with these anti-theft skewers. Use the included special but "non-unique" key to loosen or remove your wheels or seatpost binder bolt. • 3-piece kit to secure wheels and seatpost • Front: 133mm / Rear: 169mm • Seatpost: M6 x 45mm • Includes 2 copies of removal key
$79.99 - $104.99
Pinhead locks prevents removal of your wheels, and/or the seatpost, front fork, and stem from your frame. Protects your wheels, seatpost, and stem for a fraction of their replacement cost. Pinhead locks use a special coded key that comes with each lockset. Each key is different and comes with an engraved nine-digit code so it can be replaced if lost, and matching locksets can be ordered. Skewer locks use a different key than solid axle locks. Once installed, the locks remain permanently on the bicycle, even when you ride. When you need to remove your wheels for servicing, or adjust your saddle height, your Pinhead key lets you do this quickly and easily. Pinhead locks provide improved safety and security over quick-release and other fastening methods. Pinhead service and support their products by providing free replacement of any defective item for the lifetime of the purchaser, free on-line key code registration, live telephone and internet technical support, and key and part replacement service depots in Canada and Germany. Their mission is to improve cycling security and safety with high-quality locks that protect the bike and provide a safer ride. Pinhead is an investment that protects your bike parts for a fraction of their replacement cost. You can add to your bike security at any time, with matching locks for other parts or bicycles.
The TexKF Mini is designed to carry coil cables, cable and Steel-O-Flex locks (sold separately) and can be mounted on round and non-round frame tubes with a diameter or 21-80mm utilizing the flexible textile sleeve. This bracket can mount within the frame or on the side.
Designed specifically for the Granit X-Plus Bordo 6500, this convenient carrying case makes for easy, rattle-free transportation of your lock. - Flexible mounting with non-slip Velcro straps or screws for the bottle holder device - Easy transport thanks to practical holder
This mounting bracket is for transporting Steel-O-Flex, cable, and coil cable locks. - Enables transporting the lock on the seat post, on the frame, or on the rack stays - Compatible with frame diameters of 15 - 55mm - Simple mounting without tools
This bracket allows easy mounting of U-shackle locks to the bike - Mounting on round frames with a diameter of 28 - 36mm - Includes two sets of screws in different lengths for varying frame diameters - Plastic bracket for mounting with rubber inlays for a secure hold - Index marks on the bracket to simplify subsequent mountings - Comfortable one-hand operation - Very quick mounting
Easily transport the Bordo Centium lock thanks to this practical holder - Flexible mounting with non-slip Velcro straps - Mounts on nearly every part of the frame possible; the lock can be easily removed sideways
Page 1 of 1