Cranksets

- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5

In certain disciplines, the single-ring drivetrain reigns supreme. Championing simplicity, strength and durability, the SRAM RED 1 AXS power meter meets the demands of triathletes, time trialists and cyclocross racers. The power meter features improved aerodynamics thanks to direct mount aero chainrings with fully integrated power, and the tighter gearing range is perfect for racing and flatter terrains. - Single-ring drivetrain simplifies functionality - 48T and 50T variants have fully integrated power into a direct mount aero chainring - 36-46T variants have spider-based power - Chainrings can be easily changed without requiring recalibration of the power meter - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - Bottom bracket not included - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE

WTP's team series crank featuring full seamless Japanese 4130 chromoly tubing.

The Campagnolo Chorus 12-Speed Crankset features lightweight carbon crank arms, and is optimized for Campagnolo's Ultra-Torque crank system. - Utilizes Campagnolo's Ultra-Torque crank system to provide a very lightweight and stiff system that transfers power to the pedals without power loss - Directly molded unidirectional carbon fiber cranks, steel axle, and aluminum chainrings provide exceptional stiffness and optimum power transmission - Symmetrical teeth on the internal chainring allow for fluid and precise transmission, even with extreme cross-chaining - Chainrings are surface-treated for longer life - Q-Factor: 145.5mm - Design is optimized to run multiple chainring combinations - Number of Chainrings: Double - Chainline/Hub Compatibility: 130 Hubs, 135/142 Road Disc Hubs > 415 mm Chainstay - Spindle Interface Type: Campagnolo Ultra-Torque - Chainring BCD: 96 - Pedal Spindle: 9/16" - Crank Intended Use: Road - Drivetrain Speeds: 12 - BB Included: No - Weight: 686

The Cane Creek eeWings All-Road titanium crankset offers superior stiffness, durability, and weight savings. This slimmer crank is specifically designed to take on road, gravel, and cyclocross configurations. - 20%-30% more stiff than premium carbon cranks, while remaining in the same weight range - Includes CNC machined aluminum bottom bracket preload adjustment ring - 30mm spindle is compatible with the following bottom brackets: BSA68mm, PF86, BB30 (External Bearing Only), PF30 (External Bearing Only), and 386EVO - 160mm Q-Factor - Backed with a 10-year limited warranty - eeWings Tie-Dye cranks are made from the same high-grade titanium as the standard eeWings cranks and are hand-finished in a blue to purple tie-dye color giving each crank a unique character - Changes and wear to the color are expected as the cranks are ridden and will not be covered by the warranty - An optional clear adhesive surface protector will be included in the box to help ensure that the finish lasts over the course of regular use Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 135/142 Road Disc Hubs > 415mm Chainstay, 135/142 Road Disc Hubs < 415mm Chainstay - Crank Intended Use: Road, Gravel, Cyclocross - Pedal Spindle: 9/16" - Spindle Interface Type: BB30/PF30 , 386 EVO , RaceFace/Easton CINCH - Chainring BCD: Direct Mount SRAM - Weight: 395 - BB Included: No

The Onyx cranks use an oversize super-hollow 24mm spindle, and a dependable 3-piece design with a super-strong invest cast spindle and pedal boss. These cranks are designed to take the strain, stress, and power of today’s most fierce riders. - Tubular heat-treated 4130 chromoly arms & axle - Strong, lightweight crank - RSD & LSD compatible - Investment cast pedal & spindle boss - Compatible with spline drive and bolt drive sprockets - Bore: 24 - Spindle Material: Steel - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 3-Piece - BB Style: Not Included - BB Included: No

Pairing the versatile GXP bottom bracket platform with hollow carbon Exogram arms, the SRAM RED crankarm assembly is light, strong, and elegant. It can be paired with any SRAM AXS spider or integrated chainring, with or without power meter. - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings - Hollow Exogram carbon arms - BB/Spider/Chainrings not included

The road steepens, but instead of slowing down, you push harder on the pedals and fly up the hill as all of your power turns into speed thanks to your Campagnolo Super Record Ultra-Torque Crankset. It sports a unique, integrated titanium spindle design that joins the two sides of the crankset together via a toothed Hirth joint in the center. And for ultra-smooth pedaling, the crankset comes with ceramic bottom-bracket bearings that fit into outboard cups (sold separately). The aesthetically arresting design provides incredible stiffness, while Campagnolo's unified BCD (145/112mm) allows for all 3 chainring standards. Plus, the Super Record chainrings sport special pins and plating for fast, silent shifts and long life. - Chainrings included: Yes - Drivetrain speeds: 11 - Number of chainrings: Double - Spindle interface type: Campagnolo Ultra-Torque

Shimano's R9100 series crank arm achieves the ultimate in optimal power transfer. It does this through a broad Hollowtech II arm which sets the highest standards for stiffness and lightness. - Spindle Interface Type: Hollowtech II

The new Super Record 12x2 Speed crankset: an intense concentration of innovation that results in the greatest possible stiffness and precision in derailing, whilst providing a dedicated aerodynamic “super design." The new carbon fiber Super Record 12x2 Speed crankset has been made lighter on the inside through Campagnolo Hollow Technology, which uses the Ultra-Torque bracket system with a titanium axle to transfer all of the force the athlete applies to the pedal to the drivetrain. The new Super Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters, without affecting the Q factor, which remains constant at 145.5 millimeters thanks to the new hand crank design. The use of ceramic Cult bearings leads to obtaining the smooth ride that the Campagnolo brand is known for. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) combined with the eight fixing screws, optimize weight and stiffness through the increased use of carbon fiber. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.

Triathlon. Time Trial. Cyclocross. Some disciplines are made for 1x. And while SRAM's X-Range 2x set up has integrated much of the simplicity of a 1x system, there are still times when a single ring is best. The SRAM RED 1 crankset offers the most demanding racers the right mix of features—aerodynamics, durability, and simplicity. - Single-ring drivetrain simplifies functionality and reduces weight - 48 and 50t variants feature direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - Laser-etched chainring finish is more durable - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter - Version: D1

The SRAM RED crankset leverages a pivotal design innovation: smaller chainrings and a wider cassette range. This leads to smoother and faster shifting up front and more useful gearing for today's riders. The new configurations improve cadence and efficiency while also delivering shifts that are crisp, clean and quick-every time. Features - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Improved front shifting performance for crisp and accurate front shifts - Unique chainring design results in a lighter weight, stiffer, more durable crankset - DUB bottom bracket adds durability, simplicity and broad compatibility - Power upgradeable Specifications - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs, GXP/PF GXP 68mm - Chainring Size: 46/33, 48/35, 50/37 - Crank arm length: 165mm, 167.5mm, 170mm, 172.5mm, 175mm - Chainline: 45.0mm - BB Spindle Interface: 24mm, DUB - Chainring material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD): Direct Mount (DM) - Crank arm material: Carbon

The new Gen 3 Stages Power meter is built onto a Shimano Dura-Ace R9100 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelorometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 5000 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The new Gen 3 Stages Power meter is built on to a Shimano Ultegra R8000 crankset. The Stages Power meter is placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs. Tour Proven. Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter. Active Temperature Compensation as standard equipment. Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need for connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Specifications - Power meter housing: low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head - screw access on the drive side - Weight: Only adds 35g to base crankset - Battery Life: 175+ hours (via 2 coin cell: CR2032) - Power range (Watts): 0 to 2500 - Cadence range (rpm): 20-220 - Water resistance rating: IPX7 In the box - Non-drive-side power meter - Drive-side power meter - Shimano chainrings - 2x high quality CR2032 coin cell battery - Lifetime access to Stages Link for power meter management and firmware upgrade. - 2 months free access to Stages Link premium training and coaching features. - Product Identification Card with Serial Number and ANT+ I.D. Number. - User Guide

The SRAM RED AXS power meter breaks with tradition — and breaks through to new levels of performance. SRAM reengineered road gearing: reducing front chainring size and adding more range to the rear cassette. They also maintained a 13-tooth delta on all chainring pairs, ensuring precise shifting for any setup. This results in more useful gearing and better shifting across all configurations. These power meters are also designed with Quarq's premier DZero power measurement technology fully integrated into the crankset. Welcome to the pinnacle of the power meter. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Integrated power measurement - Power meter is fully integrated into the chainring set for lighter weight - Power readings are accurate within +/-1.5% and aren't affected by climate conditions during a ride - Power balance measures left and right legs separately - Improved front shifting performance for crisp and accurate front shifts - Unique chainring shape results in a lighter weight, stiffer, more durable crankset - Integrated chainring design significantly reduces weight - DUB bottom bracket adds durability, simplicity and broad compatibility - Speeds: 12 - BB Compatibility: All SRAM Road DUB BBs - BB Spindle Interface: DUB - Chainring material: Aluminum - Crank arm material: Carbon - Power Meter Type: ANT+ and BLE - Bottom bracket not included

Explore the most challenging routes on the newest crop of versatile and fun drop-bar bikes with the SRAM Force 43/30T wide crankset. Shifting is smooth, accurate, and dependable using our proven X-Range gearing based around a tight, 13T difference between the small and big chainrings. The wider stance of the chainrings expands 2x drivetrain bike capabilities by providing clearance for fatter tires. - X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - Crisp and accurate front shifts - Wide chainline crankset for bikes with up to 700c x 45 or 27.5 x 2.1" tire widths (43/30 chainrings only) - Longer DUB crank spindle accommodates both Road and MTB width frame bottom bracket standards for unmatched cross-compatibility across brands - Requires Force Wide front derailleur - DUB bottom bracket adds durability and simplicity

Performance Creativity For the aficionados and the geeks and the fanboys and the freaks, a custom-painted crank is a place of pride. A painted hammer. A beautiful ax. Troy Lee and his team channeled the future of camo to design these cranks, and the future in the stiff, durable world of SRAM cranks is looking exceptionally bright. Specifications: - Speeds: 11/12 - BB Compatibility: DUB:BSA73, PF89.5, PF92, PF30 MTB73, BB30 MTB73, BSA MTB68SP - Chainring Size: 32 - Crank Arm Length: 165mm, 170mm, 175mm - Chainline: 52.0mm - BB Spindle Interface: DUB - Chainring Material: Aluminum - Guard: No Guard - Bolt Circle Diameter (BCD: Direct Mount (DM) - Crank Arm Material: Carbon

SL-K modular BB386EVO is the latest FSA crankset for gravel, adventure, or road use. Thanks to the adaptable BB386 EVO 30mm spindle, this modular system will fit a wide variety of frames with a range of BB standards. - Hollow carbon fiber arms with UD finish - Forged AL7050 BB386EVO spindle - Direct mount outer chainring and 90 BCD inner chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems

Reach new goals and explore new roads with a power meter that delivers on accuracy, durability, and reliability. The Quarq DFour DUB Power Meter is paired with the Quarq DUB Crankarms to pair with your Dura-Ace R9100 or Ultegra R8000 chainrings. A SRAM DUB Bottom Bracket will be required for installation. FEATURES - Bluetooth low energy technology and ANT+ wireless data transfer - MagicZero - automatically checks and recalibrates your power meter as you ride – no need to manually calibrate - AxCad -- no cadence magnet required - 10K Temperature CompensationBattery -- CR2032, 200-hour battery life, change without tools - OmniCal -- swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy -- within 1.5%, measuring both legs. SPECIFICATIONS - Speeds: 11 - Crank arm length: 170mm, 172.5mm, 175mm - BB Compatibility: All SRAM Road DUB BBs - Chainring Size: n/a - Bolt Circle Diameter (BCD): 110 BCD - Chainline: n/a - BB Spindle Interface: DUB - Chainring material: n/a - Guard: No Guard - Crank arm material: Carbon - Color (Crank arm): Natural carbon - Power Meter Type: Spider

Forget front derailleurs; SRAM's Force 1 Crankset brings a game-changing upgrade in performance and reliability to cyclocross, road, and other 700c disciplines. Force 1 combines the durability, simplicity and efficiency that SRAM is known for with their 1x mountain technology. - Single-ring drivetrain simplifies functionality - SRAM X-Sync: wide-tooth, narrow-tooth chainring technology provides maximum chain control - Chainrings available in 42, 50 (110 BCD), and 52 (130BCD) teeth to conquer every course from sand dunes to gravel-road assaults - Unidirectional carbon crank arm matched to a forged aluminum spider for lightweight and durability - Weight 679g-24mm, 172.5mm, 50T, no BB - Bottom bracket not included

Already a legend in its time, the SRAM RED crankset is now available with refreshed graphics to complement the SRAM RED eTap componentry. The SRAM RED crankset features a completely hollow construction all the way to the spider. Its hidden bolt pattern makes better use of carbon fiber to further improve stiffness and shed weight. As always, for seamless, flawless performance and Yaw compatibility, pair this crank with X-GlideR chainrings. - SRAM Road 11-speed compatible - Compatible with SRAM RED eTap components - Exogram technology uses a large, hollow cross section all the way to the spider, minimizing weight while maximizing stiffness - SRAM's stiffest crank ever - Hidden bolt pattern leverages the characteristics of carbon fiber while presenting a sleek appearance - Stiffer X-GlideR chainrings feature thicker construction and advanced shift timing pins and ramps, which are optimized for shifting with the Yaw front derailleur - Arm Material: Carbon - Chainring Material: Machined alloy - Weight: 557 grams (BB30 172.5mm 53x39 BB not included) - Compatibility: SRAM RED & SRAM Force Yaw Front Derailleur, SRAM RED 22 & PC1170 chains - Finish: Carbon - Bottom Bracket Compatibility: BB30, PressFit 30

Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups

Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Double front chainring set up - Combines wide range and close gear steps - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups

Shimano XTR M9100 cranks feature a lightweight and rigid design thanks to Hollowtech II crank construction. Chainrings can be easily exchanged with the direct mount system and one key release. - Single front chainring set up (chainring not included) - Gear tooth profile designed for MTB riding usage - Crank can be exchanged between single and double front chainring set ups - 168mm Q-Factor

The RS510 crankset features a 4-arm design that's light and stiff, providing high performance on a low budget. - For 11-speed drivetrains - Compatible with frames of O.L.D. 135 mm and 410 mm chainstay length - Affordable and high-end style crankset

When SRAM began developing XX, they were looking to create the lightest, most precise and technically advanced components possible, and boy have they delivered! The XX Crankset boasts carbon/aluminum arms to keep the weight incredibly low and boost stiffness to stratospheric levels. The chainrings are no small feat of engineering, either. They’re painstakingly cut from solid aluminum blocks to eliminate power-robbing flex and they’re exquisitely ramped and pinned to provide lightning-quick, impressively crisp gear changes. What’s more, the XX is available in two widths so you can get the perfect fit and maximize efficiency.

- Various choices for bike and riding style - More durable chainwheel teeth - New 3D composite chain ring's teeth composition is optimized for each chainwheel load out (1x11, 2x11 & 3x11) with steel driving gear teeth and aluminum support gears - Improved driving rigidity - Loose ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Model Number : FC-M8000-3 - Series : DEORE XT - Crank Construction : HOLLOWTECH II Technology - Cassette Compatibility : 11 - Bolt Circle Diameter : P.C.D. 96/64mm - Chain Line : 50mm - BB Shell Width : 68, 73mm

Not ready for carbon? The Gossamer is a high-end crankset for alloy lovers. With an impressive history of wins on the brutal cobbles of Paris-Roubaix, it needs no further introduction—yet the details shouldn't be ignored. The cold-forged aluminum arms are heavily scalloped for the maximum strength-to-weight ratio, and the versatile BB368EVO spindle is forged from an even stronger material. The 30mm BB386 EVO spindle is compatible with virtually every frame standard available by choosing the appropriate BB. The chainrings are CNC-machined from still-tougher 7075 aluminum, then recess-machined and pinned for rapid precise shifting. Boosting overall stiffness our ABS system—Asymmetric Bolt Spacing—with the chainring bolts strategically spaced to provide optimum strength from a 110mm BCD. - Cold-forged AL6061/T6 aluminum crank arms - Forged AL7050 BB386EVO spindle - AL7075 100% CNC chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems

The Descendant 7K crankset delivers consistent performance every ride. Featuring SRAM's X-SYNC2 tooth profile chainring, the Descendant crankset is engineered for complete chain control. Each tooth's thickness is precisely toleranced and controlled to work seamlessly with SRAM chain's inner and outer links. SRAM DUB technology features a better-engineered bottom bracket and a new spindle design. Together, these allow for a more uniform approach to bottom bracket fitment, better sealing against contamination and forward and backward compatibility. Now everyone can benefit from a new measure of durability. - 56.5mm chainline (Super Boost+) - The Descendant 7K crankset is compatible with the SRAM Eagle drivetrain system - Featuring SRAM’s X-SYNC2 tooth profile - Optimized 7000 series forged aluminum arms - SRAM DUB technology features a uniform approach to bottom bracket fitment, better sealing against contamination and is forward and backward compatible - Direct Mount ring - ISO 4210 compliant - 12-Speed - DUB bottom bracket sold separately

The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately