Pumps & Co2

Get your Airstik SL fresh and ready for the ride with the Airstik SL Rebuild kit.

Don't let your Mammoth 2Stage and Outpost HV pump fall behind. Keep it safe and secure to your bike with our Clip & Strap kit. Compatible with: - Mammoth AnyValve Mini-Pump - Mountain AnyValve Mini-Pump

• Compatible with Air Support HP, HP Pro, HV (429231, 429232, 429233, 429234, 429235)

The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.

Service your Mammoth 2Stage Mini-pump and Outpost HV Mini-pump with this rebuild kit. Compatible with: - Mammoth 2Stage Mini-pump - Outpost HV Mini-pump

Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.

TEN SECOND TUBELESS FLAT FIX. This is a quick, one-shot tire plugging system for tubeless tires. Deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble.

Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.

Rebuild seal kit for the Lezyne HP Floor Drives (CNC, Alloy, Classic, Steel, Sport). Kit includes a replacement swivel and a piston seal o-ring.

For all of the following models: - Carbon Drive Lite - Pressure Drive - Pressure Carbon Drive - Tech Drive HP - HP Drive - Sport Drive HP - Micro Floor Drive HP - Micro Floor Drive HPG - Swivel Drive HP

For all of the following models: - Carbon Drive - Alloy Drive - Tech Drive HV - HV Drive - Sport Drive HV - Micro Floor Drive HV - Micro Floor Drive HVG - Swivel Drive HV

Bringing Lezyne's Metal Kit along is the difference between being stranded and making it home. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a waterproof aluminum box that fits neatly in a seat bag, jersey pocket or hydration pack.

- Replacement rubber caps for HP / HV / alloy / pressure / road drive pumps - Sold as a pair

A rebuild seal kit for the following Lezyne hand pumps: - Road Drive - Carbon Road Drive

There’s no easier or more effective way to patch a cut tire on the road or trail than carrying and using Park Emergency Tire Boots (3 per package). These thin, extra-tough patches peel and stick to the insides of tires to repair cuts and contain the tube until you can replace the tire.

Park's Vulcanizing Patch Kit includes 4 round patches for small holes and 2 oval patches for wider cuts; a tube of self-vulcanizing glue that bonds the patches to your tube super securely; and sandpaper for preparing the punctured area for gluing. The kit comes in a small plastic box to fit in your seat bag or pack.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims. And, it comes with an O-ring seal to ensure a leak-free fit.

These threaded 16-gram cartridges can be used with all Genuine Innovations inflators that have a 3/8-inch-24 thread.

Lezyne's Dual Valve Pump Head is compatible with all high-pressure floor pumps and fits Presta and Schrader valves. Featuring durable composite construction and an aluminum locking lever, it's ready to pump when you are.

Lezyne's Slip Chuck is the perfect solution for getting to those hard-to-reach valve stems, especially on disc wheels. It's precision-machined from aluminum and is designed to fit Presta valves on deep-dish carbon disc wheels.

Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.

You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.

220 PSI replacement analog pressure gauge for all standard floor pumps, includes glue and o-ring. Highly precise with an oversized 2.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires.

- Replacement ABS Flex Hose for Lezyne hand pumps - Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps

Replacement ABS Flip Thread Chuck for all Lezyne High-Pressure Floor Drive floor pumps and all Micro Floor Drive hand pumps.

Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.

Anyvalve pump head adapts to Presta, Schrader, and Dunlop valves. Details: - Rebuildable internals - Tough aluminum barrel - Ergonomic handle - Includes cage mount - 90 psi max pressure - 162g / 0.35lbs

Park Tool's Micro Pump is a super small micro pump that fits in just about any bag or jersey pocket or mounts directly to the frame. Ideal to take along when space and weight are an issue. Aluminum barrel with a locking dual head and soft-touch dual-density flip out handle. - Presta and Schrader valve compatible - Maximum pressure: 100 psi / 7 bars - Weight: 3.7 ounces (105g) - Length: 7 7/8" (200mm) - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage

Premium twist-to-regulate CO2 inflator. CONSTRUCTION • Fibre composite CO2 head with CNC-machined alloy valve connector and mud plug HEAD • CNC-machined alloy valve connector threads easily onto Presta or Schrader valves ADDED BENEFITS • Twist-to-regulate CO2 • Includes 16g CO2 cartridge • Compatible with standard threaded CO2 cartridges • Pressure Rating: cartridge dependent • Weight: 21 grams / 0.05 pounds • Length: 3.5cm / 1.4 inches

220 PSI replacement analog pressure gauge for 2014 and later models of Alloy, CNC, and Classic pumps, includes glue and o-ring. Highly precise with an oversized 3.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires. Included on our CNC, Alloy, and Classic floor drives.