Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

$55.00
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
$40.00
- Digital pressure gauge - Fits both Schrader and Presta valves - Digital screen
$19.99 - $22.49
Pssstttt. Tired of hearing that when you disconnect your shock pump? Well, hear it no more thanks to Topeak's Pressure-Rite. It's a must have for suspension fanatics as its ingenious design prevents air loss when adjusting shock and fork pressure. It's also available in a Presta version, perfect for disc wheels.
$48.99
Upgrades any pump to a SmartHead pump head. Includes hardware, 40-inch hose, and SmartHead pump head.
$6.99
The “Holster” allows you to carry your GUP in style and have quick access to it when it’s needed the most. The long Velcro strap allows it to fit on most frames, seat posts and saddle rails, while the lightweight silicon block protects your frame and keeps your GUP securely fastened. Holster up!
$64.99
- 350 PSI replacement pressure gauge - For all floor pumps - Includes glue and o-ring - Highly precise with a 3.5-inch screen - Two-button system for easy use
$9.99
Bringing Lezyne's Smart Kit along means not letting a flat ruin your ride. It contains six glueless patches, a tire boot and a stainless-steel tube scuffer. All of this is stored in a compact pouch that fits just about anywhere for the ultimate in portability.
$19.99
- Replacement ABS Flex Hose for all Pocket Drive pumps - Presta & Schrader compatible
$24.99
220 PSI replacement analog pressure gauge for all standard floor pumps, includes glue and o-ring. Highly precise with an oversized 2.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires.
$9.99
Replacement Composite Matrix pump mount for all High-Pressure hand pumps (HP, Tech HP, Micro Floor HP/HPG, Pressure, Carbon Pressure Drives). Includes Velcro pump strap.
$17.08
Smart-style head will retrofit to any SKS pump. - Presta/Schrader/Dunlop
$9.99
For all of the following models: - Carbon Drive - Alloy Drive - Tech Drive HV - HV Drive - Sport Drive HV - Micro Floor Drive HV - Micro Floor Drive HVG - Swivel Drive HV
$19.99
- Replacement ABS Flex Hose for Lezyne hand pumps - Presta/Schrader ABS Flex Hose for HP, HV, Alloy, Pressure, and Tech Drive hand pumps
$46.98
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges. - Includes TL-Head, two 216g threaded cartridges and two tire levers - Compatible with Presta, Schrader and Dunlop valves
$9.99
For all of the following models: - Carbon Drive Lite - Pressure Drive - Pressure Carbon Drive - Tech Drive HP - HP Drive - Sport Drive HP - Micro Floor Drive HP - Micro Floor Drive HPG - Swivel Drive HP
$59.99
350 PSI replacement pressure gauge for all floor pumps with 2.5-inch gauges, includes glue and O-ring. Highly precise with a 1.5-inch screen and two-button system for easy use.
$15.00
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
$67.49
This mini sized gauge can be attached between the pump and valve to read pressures while pumping or used alone. Provides pressure readings up to 160 psi / 11 bar. Rotating gauge is easy to read and the head works with Presta, Schrader or Dunlop valves on bikes / motorcycles / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. An air release button allows fine tuning of pressure. - Pump Head Compatibility: Presta / Schrader pumps - Tire Valve Compatibility: Presta / Schrader / Dunlop valves - Gauge: Reads 160psi / 11 bar, 1-1/2" analog - Pressure Tuning: Air release button - Material: Engineering grade polymer / aluminum - 360 degree rotatable gauge, Dust cap - Size: 6.2 x 5.8 x 3cm / 2.4" x 2.3" x 1.2" - Weight: 50g / 1.76oz
$45.00
Upgrade any pump to the TwinHead pump head.
$5.99 - $7.99
**We receive these cartridges in bulk and therefore they're sold without retail packaging** A sure way to ruin a ride is getting a flat tire. A CO2 cartridge is a quick and easy way to re-inflate your tire after replacing your tube. These threaded cartridges simply screw into a CO2 inflator (sold separately) and will get you back on the road (or trail). A 20g CO2 cartridge contains a mid-sized charge suitable for all road tire or higher volume gravel tires or similar (Exp. 700c x 40mm / 29" x 1.5").
$24.99
The classic SKS Multi Valve head has been completely revamped! Now you can seamlessly lock the pump head with one finger. The new MV EASY head features improved functionality, a sleek design, and better handling. The head is made of high glass fiber-reinforced plastic. This head features separate holes for use on either Presta or Schrader valve types. Say goodbye to unwanted whistling and stuck check valves, thanks to the new Rocker technology that SKS Germany has put in the new MV EASY pump head. - Max Pressure: 230 PSI - Will work with all SKS floor pumps
$74.99
Lezyne's Digital Check Drive is an innovative, compact digital pressure gauge. Composite matrix construction with integrated, low-profile Digital Strip Gauge. Machined aluminum head with flip-style Presta or Schrader valve compatible chuck. Super portable, highly accurate system. - Max: 350 psi/24 bar
$6.00
Topeak Pump replacement parts and accessories. Includes all parts needed to rebuild TwinHead pumps.
$24.99
220 PSI replacement analog pressure gauge for 2014 and later models of Alloy, CNC, and Classic pumps, includes glue and o-ring. Highly precise with an oversized 3.5 inch face, this new gauge increases visibility and allows the user to read a more precise measurement of low and high pressure tires. Included on our CNC, Alloy, and Classic floor drives.
$10.99
Lezyne Pump Parts
$60.00
Adapts Presta valve stems for use with standard Schrader pumps.
$9.99
Rebuild seal kit for the Lezyne HP Floor Drives (CNC, Alloy, Classic, Steel, Sport). Kit includes a replacement swivel and a piston seal o-ring.
$24.99
Replacement rubber hose and ABS Flip Thread Chuck for all high-pressure floor pumps and Micro Floor Drive (HV/HVG & HP/HPG) hand pumps. Includes all necessary aluminum connectors.
$9.99
A rebuild seal kit for the following Lezyne hand pumps: - Road Drive - Carbon Road Drive
$237.75
Airspy Wheel Mounted Air Sensor—Schrader mounts on the wheel/valve and gives constant readout of tire pressure on either the SKS MYBIKE app or Garmin device. - For front and rear wheels - Includes battery and security lock - For Schrader valve stems - Reads to 8.3 bar / 120 psi - Weight: 18 grams
Page 1 of 2 Next page