Filter By:
Cables

$29.99
Kink's One Piece Cable system incorporates all the great features found in the DX linear cable and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance, and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop and works best with modern frames using a 245mm cable stop-to-mount distance.
Tech Specs
- Housing: Coated linear strand
- Wire: 1.5mm Pre-stretched slick wire
- Length: 50"
- Lug: Two-piece bind-free brass
- Fits: Frames with 245mm cable stop distance
- Weight: 3.0oz

$1.99 - $11.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

$4.89 - $14.99
Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

$4.89 - $14.99
Sport level brake cables come in a variety of cable end setups to fit most bikes at a quality level well above normal OEM cables.
- Slick cables are die-extruded for smooth operation
- Pre-stretched
- SRAM/Shimano mountain compatible cable end
- Stainless steel construction resists corrosion
- Single end cable features weld-cut for easy installation

$19.99
Includes 2 replacement knarps for Desist brake set. Use one for front brakes, use both for dual-cable gyro setups.

$29.99
The Kink Linear DX cable features an outer linear strand housing, which decreases bind when the cable twists during tricks. The custom brass lever lug allows the inner wire to twist freely within the brake lever eliminating twist and bind even further. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming.
TECH SPECS
- Housing: Coated Linear Strand
- Wire: 1.5mm Pre-Stretched Slick Wire
- Length: 50"
- Lug: Two-Piece Bind Free Brass
- Weight: 2.0oz

$24.99
Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

$4.99 - $14.99
Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

$14.99
- Left and right shifter compatible
- Road and MTB compatible
- 1.1mm polished stainless steel cable

$54.99
Shimano Stainless Road/MTB Brake Cable & Housing Sets
- 1 x 2000mm black 5mm housing
- 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables
- 2 end caps and 2 cable crimps

$59.99
These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation.
Includes:
- 1400mm x 5mm housing x 1
- 800mm x 5mm housing x 1
- 2050mm x 1.6mm cable x 1
- 1000mm x 1.6mm cable x 1

$62.99
SRAM's SlickWire XL Road Brake Cable Kit is the perfect kit to have on hand to fix broken cables and a great upgrade, too. You get excellent 1.6mm coated cables, slippery lined 5mm-diameter housings, aluminum ferrules, and frame protectors.

$64.99
Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation.
- Dura-Ace grade SLR-EV Road brake cable set
- Stainless steel for anti-rust protection
- Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance
- Pre-lubed with special polymer compatible grease

$24.99 - $29.99
Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hayes brakes and includes enough hardware for one bicycle.

$14.99
RockShox's Reverb Cable/Hose Line Guides are a great way to route dropper posts on frames without integrated guides. They secure with a zip tie, and feature a wide mouth that allows for cable articulation as you drop and raise your post.

$24.99
- For either front or rear shifter
- Road & MTB compatible
- 1.1 polished stainless steel cable

$39.99
Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike.
- Each Bottle contains 500 tips

$19.99
Frame-mounted barrel adjusters allow cable tension to be easily fine tuned.
- Adjuster threading is M5 standard: 5mm OD, 0.8mm thread pitch
- Bag of 10

$34.99 - $37.99
- Aluminum cable crimps to prevent frayed cables
- 1.2mm for shift cables or 1.6mm for brake cables
- Silver aluminum
- 250-count bottle

$69.99
Original equipment hydraulic hoses for no-compromise brake performance.
- Hose Use: Front, Rear
- Black
- 2000mm hose length
- Compatible with SRAM road hydraulic disc brakes

$9.99 - $14.99
Jagwire's Sport Slick Teflon Shift Cable is made of stainless steel and coated with Teflon for excellent corrosion resistance, durability and a super-smooth shift every time. It's a nice upgrade for your shift cables.

$19.99
Cables are coated with a durable low-friction polymer.
- Dupont Tefzel coating is more durable than previous coated cables
- Length: 2350mm
- Diameter: 1.6mm
- Double Ended: No

$54.99
- 1.2 mm x 2100 mm (1 pc.)
- 1.2 mm x 1800 mm (1 pc.)
- OPTISLICK
- Stainless steel
- Outer cap with short tongue for ST (2 pcs.)
- SIS-SP40 outer caps (3 pcs.)
- SIS-SP40 sealed outer caps (1 pc.)
- Inner end caps (2 pcs.)
- OT-SP41 1700 mm
- OT-RS900 (1 pc.)

$14.99
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

$4.99 - $29.99
Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.
Page 1 of 2
Next page