Parts & Accessories
- Allows for tool-free removal of your water bottle cage from your frame - Especially useful for quickly and easily removing a bottle cage before a race - Compatible with nearly every existing water bottle mount on your frame - For best compatibility, use with Bontrager RL or RXL bottle cages - Also compatible with some other bottle cages - Do not torque installation fasteners past 1.5Nm
- Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 46 x 23 x 8 cm / 18 x 9 x 3 in
Keep your water flowing freely, even in the most harsh conditions. The Crux Thermal Control kit takes insulation to the next level so your tube and valve stay ice-free. Designed for reservoirs with the Quick Link system, this cold-weather accessory will extend the range of use your hydration pack during all outdoor adventures. Features: - Insulated Tube: Protects the flow of your fluids in cold conditions - Freeze-Proof Valve: Integrated cover keeps ice from forming in bite valve - Fits Reservoirs with Quick Link System: Keep your Crux working hard year-round with this easy upgrade
A replacement bite valve for your Quick Stow flask. The one-piece silicone design delivers rapid hydration and self-seals to eliminate annoying leaks and drips. Features - Patented one-piece silicone design - Bite valve self-seals to eliminate annoying drips - Fits only Quick Stow flasks - A great foldable and lightweight hydration accessory - Self-seals to eliminate annoying leaks and drips
Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.
The EVOC Bite Valve is a mouthpiece for the drinking tube of your Hydration Bladder. - Self-closing silicone stream valve - Leak-tight seal against escaping liquid - Taste-neutral material for pure flavor
The Crux reservoir on/off valve pairs with CamelBak's Big Bite valve and tune. Using an integrated valve, water flow shuts off for added security during transport.
New Crux tube offers 20% more water per sip, and with the insulated thermal sleeve your water stays cooler in warm weather.
Keep your tube close and hydration on-tap with the Magnetic Tube Trap.
Keep your reservoir funk-free with this cleaning brush kit from CamelBak.
CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.
$19.99 - $34.99
The B-RAD system begins with a series of slotted mounting bases. Available in a variety of sizes, B-RAD bases can shift a bottle cage away from inconvenient rear shocks, add room for tools or tubes below a bottle cage, or even provide space for a second bottle on sufficiently-long down tubes. Bases are the foundation for the B-RAD system and the rest of the B-RAD system mounts to them. Reposition bottle cages using existing bottle cage mounts on your bike. Lightweight, durable and made from rust-proof materials, these flexible B-RAD system bases allow you to customize storage to your specific needs. B-RAD 2 The 2-Slot Base can move bottle or other accessory to an optimal location even on a smaller or dual suspension frame. B-RAD 3 The 3 slot base with 4 threaded holes provides additional adjustment and mounting options vs the B-RAD 2. A typical application would be to mount a bottle cage in the forward threaded holes with a B-RAD accessory tucked behind it. This mounts perfectly to triple bottle mounts on frames and forks. The B-RAD 3 includes a zip tie, channels for the zip tie, and a foam pad for secure mounting. B-RAD 4 The 4 slot base is the longest base with 9 threaded holes for the ultimate flexibility and capacity when bike packing, touring, commuting or just exploring on 2 wheels. It's long enough to mount 2 small bottles inline or multiple accessories. The B-RAD 4 includes zip ties, channels for the zip ties, and a foam pad for secure mounting. DOGBONE The Dogbone can be used to offset a bottle or other accessory to an optimal location. Most commonly used for smaller, curved or dual suspension frames.
Sleek water bottle shaped organizer that fits into standard bottle cages. Internal compartments, including one zippered, organize small cycling essentials—including tire repair, snacks, personal items and more. It features a soft, semi-rigid shell that’s durable and water resistant. A full zipper allows for a full 180° opening, providing easy access and better organization. Its all black design, with black logos, matches with all styles of bicycles.
Integrated stainless steel storage bracket that fits under a bottle cage. Holds included Twin Speed Drive CO2 head, V5 multi tool, and two Matrix levers. It will also hold two CO2 cartridges (sold separately). - Weight: 95g /311g Loaded
Don't let a rainy day ruin your ride and soak the contents of your pack. Pick up CamelBak's Rain Cover! A hook and loop closure and a drawstring secure it over your hydration pack, keeping your gear safe and dry.
Add a Hot Cap to your existing Chute Mag Stainless for an instant upgrade! The leak-proof cap allows 360° drinking from any side and is easy to twist apart and clean. Accessory fits any size of Chute Mag Stainless. Features: - 360° Cap: Allows drinking from any side of the bottle - Leak-Proof Rotating Valve: Twists open for easy sipping and twists apart for easy cleaning - Fits All Chute Mag Stainless Bottles: For giving your bottle an instant upgrade - Dishwasher Safe Cap: Cap assembly is top-rack dishwasher safe (hand wash vessel)
Alt-Position Cage Mounts provide an alternative way to raise or lower your water bottle cages when they are assembled on rear hydration devices for you to comfortably mount or dismount your bike. They also provide mounting location options for Topeak Ninja Bottle Cages and allow use of different Ninja bottle cage series combinations on smaller frames and tighter spaces. - Material: Aluminum - Compatibility: Topeak TRI-BackUp Elite series, Omni-BackUp Elite, Topeak Ninja bottle cage series - Size: 10.8 x 1.2 x 9cm / 4.3" x 0.5" x 3.5" - Weight: 25g / 0.88oz (1 pc w/ 4 bolts)
Increase the easy-drinking nature of your Quick Stow Flask with this tube adapter.
Give your pack a lower center of gravity with the brand new Crux LR reservoir. It delivers 20% more water per sip while keeping weight positioned low on your back, which translates to better stability in the saddle and on the trail. The Crux delivers 20% more water with every sip, plus an on/off lever that seals your tube shut when you’re not drinking. CamelBak also upgraded the fill-port design to include an ergonomic handle and a redesigned a cap that’s more intuitive and easier to fill—small changes that make it that much easier to fill up and hit the road.
Dry your reservoir quickly with the CamelBak Reservoir Dryer.
New Crux tube offers 20% more water per sip. Positions tube for convenient, hands-free drinking; no need to reach for a drink.
CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.
SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.
Your reservoir tube leads a hard life. Why not pick up a fresh CamelBak Pure Flow Replacement Tube and start enjoying fresh water again? It's 38.5 inches long and is compatible with most hydration systems.
Aqua Cell replacement parts kit for use with the Profile Design Aqua Cell hydration system. - Kit includes straw, extra mesh, bottle tops, and rubber bands
$32.99 - $34.99
Stash it in your running vest, belt, or even in the palm of your hand. This lightweight, collapsible flask features our classic one-piece silicone bite valve for rapid hydration on race day, and packs down easily once it's empty. We designed the Quick Stow to fit easily in the front compartments of all of our running vests. Once it's empty, it folds down small enough to fit in your pocket. - Bite valve self-seals after each drink, eliminating annoying drips - Empty flask collapses and folds ultra-compact to fit in most pockets - All parts top-rack dishwasher safe - Volume indicators in ounces and milliliters for tracking hydration and adding electrolytes - Hang flask upside down for easy drainage and drying
Have you ever tried to grab a bottle from an aid station then dump it into your aero drink on the fly? That can get messy. Profile's HC Mount w/KA1 Cage allows you to attach a bottle cage in between your extensions so you can grab a bottle and have it within easy reach. It's an easy way to add more water carrying capacity to your bike.
The Crux delivers 20% more water per sip, with an ergonomic handle for easier refilling, and an on/off lever that makes it easy to prevent leaks. - Offers 20% more water per sip - Leak-proof cap is easier to open and close - On/off lever lets you seal your drinking tube shut with one hand - Hydroguard technology inhibits the growth of bacteria in the reservoir and tube - Big bite valve self-seals after each drink, eliminating annoying drips - Dimensions: 30 x 18 x 6 cm/ 12 x 7 x 2.5 in
Page 1 of 2 Next page