Paceline disc brake rotors incorporate the elegant design of our eTap AXS road groupsets and feature a new brake track vent design for smooth, quiet braking performance. - Designed for road use - Paceline brake track offers quiet brake operation
The squeeze of our levers is what dreams are made of. Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - ReachAdjustment -- Qwik-Adjust Barrel Adjuster Bend Zone
The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes
- Reversible 6061 aluminum arms for left or right cable routing - Quick-release noodle is lined with Teflon for smooth action - High tension square wire springs - Thinline threaded pads with easy-to-adjust arm hardware - Made in USA
Add a rear disc brake to your 2001 and later Trek, Klein or Gary Fisher bicycle with this International Disc Brake Mount. Please note, disc brake and disc compatible wheel hub sold separately.
Profile's 3/One Caron Aerobrake Levers are light and supremely aerodynamic, the perfect complement to your cutting-edge triathlon or time-trial bicycle. They boast feathery, stiff, and ergonomic 1-finger carbon levers with a composite mount, and internal cable routing capabilities for optimum aerodynamics (cables sold separately).
$14.99 - $19.99
- Replacement pads for Campagnolo Super Record 11-speed groups - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for wet weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping - Triple: Kool-Stop's most aggressive compound combination for controlled braking in all conditions - Carbon - Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear
- K-Force rotors feature a two piece design balancing weight and braking performance. Weight relieved alloy carrier for added rotor stiffness - Afterburner rotors have an increased surface area for better heat management - Rotors include: (1) 6-bolt/44mmBCD rotor with (6) T-25 rotor mounting bolts - 98g K-Force, 142g Afterburner
Shimano's XTR Race Disc Brake Caliper has the modulation you demand with enough power for the World Cup XC race circuit. The body is a forged one-piece aluminum post-mount design that makes the brake super light and extremely rigid. Oversize ceramic pistons supply heaps of bite, and superior temperature regulation, so you can tackle long descents with confidence. Lever, hose, mineral oil, and rotor sold separately.
Kool-Stop's sleek, lightweight cross pad with their triple compound technology is a great choice for competitive cross bike racers. Features: - Forged Alloy Holder - Triple Compound - Lightweight Design Specifications: - Overall length: 54.5 mm - Pad contact width: 7.5 mm
$12.99 - $15.99
Kool-Stop's New V-Type 2 insert just got heavier with 1.5mm more pad material than the original V-Type insert. Still fits most Shimano Style V-Brake holders Features: - Water Grooves - Dual Compound - Rim Friendly Compounds: - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! - Salmon: Kool-Stop's most famous Salmon compound is also one of our most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Triple: Kool-Stop's triple compound is their most aggressive compound combination for superb braking and controlled stopping in all weather conditions. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Carbon 2: This compound works great on most carbon wheels and is designed to withstand those fast steep descents without a lot of pad wear. - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding.
• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound
Organic brake compound with aluminum back plate. Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material, the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad. - Qty 1 = enough for 1 wheel - Formula B4|Racing XC|Extreme FR/DH/B4/Team/PRO/SL model also compatible with Grimeca System 13
Characteristics: - smooth feel in the brake lever - predictable and progressive brake power - very high durability - consistently quiet operation Fits: Magura - MT 2,4,6,8 Campagnolo - Road Disc
Maximum pad life. Minimum brake fade. EXOTherm2 combines an extremely durable, smooth modulating pad compound with a cooling fin equipped back plate which provides consistent, powerful braking in all conditions. - pad wear rate is much lower than competitors - smooth, consistent brake performance - lightweight at 22 grams per pair (Disc 28 EXOTherm2) Fits: Magura: - MT 2,4,6,8 Campagnolo: - Road Disc
The eeBrake G4 is the fourth generation of the legendary eeBrake featuring 100% CNC machined parts, a wider design optimized for 22 – 28mm rims, stiffer black arch spring, a revised one-piece center adjuster with built in resistance for easier use and ghosted laser etching that will stand the test of time – all with the same extraordinary stopping power and light weight that you’ve come to rely on from eeBrakes. REMARKABLY POWERFUL, POWERFULLY LIGHT The eeBrake is the ultimate brake from start to finish – a uniquely robust patented design developed and refined by relentless engineering, both at the computer and through real-life testing. At half the weight than that of its competitors, eeBrakes continue to set new standards by which all other high performance road brakes are judged. The same supreme upgrade for performance-oriented riders, a dramatically higher overall stiffness provides better modulation and more power. No detail has been overlooked, greater tire clearance and tool-less pad centering make installation simple. PERFECT CABLE ALIGNMENT The all-new titanium eeBrake cable adjuster pivots as the brake is applied, optimizing cable alignment during brake actuation. Also, the cable housing extends to lower tip of the cable adjustment screw eliminating added friction. That means, as the brake lever is squeezed, you get even and friction-free braking power. AERODYNAMIC Cross Cable Path aligns the brake cable over the center of the brake. This alignment provides a graceful, clean line and moves cables into the “wind shadow” of the frame, providing an aerodynamic advantage over traditional brakes with their cables and lever arms off to one side of the caliper. EASY PRECISION The tool-less adjustability provides super precision and pad motion consistency through the patented “Link” pad travel proportioning system. No annoying pad rub and constant need to re-center. No more re-adjusting the main fixing bolt after initial installation or using spring tensioning screws to align the brake pads. QUICK & SIMPLE One simple flip of the lever on the Quick Strut release opens wide enough to easily clear a 31mm tire allowing easy wheel removal. Change pads with ease using our patented system via Shimano style pads allowing for easy pad installation and removal without the use of tools. MATERIALS - CNC High Grade Aluminum, Titanium, and Stainless Steel RIM WIDTH COMPATIBILITY - 19mm to 28mm ADJUSTMENTS - Tool-free caliper centering adjustment - Wheel removal - quick release - Titanium Barrel adjuster w/ retention O-ring - T-25 Trox pad holder / cable clamp LEVERAGE COMPATIBILITY - Optimized to work with Shimano, Campagnolo, and SRAM levers LOGO BADGES - Two stage anodized engraved aluminum ee badge WEIGHT DIRECT MOUNT - 78.4 grams* (Front) - 78.2 grams* (Rear) *Pads not included WARRANTY - 3 Years
- Molded road brake pads - 50mm pad length
The built-in adjustability of SRAM's 990 Aero Brake Levers makes it easy to achieve your preferred braking feel on almost any aerobar setup. A turn of a 2mm Allen key frees the lever to spin, allowing the user to make up to 8mm’s of inward or outward adjustment to their brake calipers. Such wide adjustability makes it easy to fine-tune hard to reach brakes on the most innovative triathlon and time trial machines.
Smooth post cantilever pads - 55mm pad length
Threaded post with hardware - 70mm pad
Smooth post cantilever pads - 70mm pad length
Caliper only - does not include lever or hose. 18mm front or rear. Includes steel-backed organic pads - Brake Lever Actuation: Hydraulic - Rotor Included: No - Hydraulic Fluid Type: DOT
$10.99 - $19.99
The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders
Light enough for XC and powerful enough for freeriders, Avid's Elixir CR provides world-class control and power. Avid's Taperbore technology and Power Reserve Geometry deliver great modulation and pinpoint stops. Increased power comes courtesy of a super-stiff, 2-piece caliper that contains larger pistons and DOT 5.1 fluid for better heat resistance to prevent brake fade. This fine stopper also uses a tool-free, in-line pad contact adjustment that allows you to adjust where the pads contact the rotor and balance both levers so the pads engage in the same spot. Plus, the Elixir's unique integrated, in-line reservoir provides a major weight reduction and a sleek look. It even comes complete with Avid's Clean Sweep rotor. ** These brakes are OEM stock and as such ship without retail packaging. Brakes ship bled and ready to ride. Front hose is 81cm long and rear is 126cm long.**
$39.99 - $44.99
SRAM's Disc Brake Pads are reliable and rugged. These pads are compatible with Avid Trail and SRAM Guide disc brakes.
• 107mm arch for better clearance with mud guard • Updated rubber boots secure attachment to lead pipe • Strong braking power with excellent braking control • Cartridge shoe holder • Color options: Black, Silver
$209.99 - $219.99
• More stable brake performance in various conditions without a change in lever position • High power and controllable braking for all MTB riding styles • Smoother operation, subtle control with minimum free stroke • Easy maintenance • Easy adjustment • Sleek, durable and clean master cylinder design with I-spec II • Finned Ice Tech brake pads • 140mm rotor additional • Ceramic piston
$49.99 - $62.99
Smooth, controlled braking is yours with Avid's HS1 Rotor. It utilizes cross-drilled technology to dissipate heat, save weight, and give you a consistent feel at the lever and predictable speed control in all conditions.
The Continental is Kool-Stop's classic conventional design, for use on older bicycles or brake systems with clearance problems. Great for City Bikes and steel rims. Features: - Internal backbone - Nyloc retaining nut - Thicker pad Specifications: - Weight per pair: 41.6 grams - Overall length: 45.5mm - Pad contact width: 9.4mm
$22.50 - $40.00 $45.00 - $84.99 Up to 53% Off
These are new OEM items and as such are sold w/o retail packaging. Introducing the Tektro RX 5.0 Carbon Reverse TT / Triathlon Levers. These levers are sold in a pair and feature a carbon lever blade attached to an alloy body, making them light and stiff. If you're looking for optimal performance on your TRI or Time-trial bike, these brake levers are a great addition to your ride.
Page 1 of 6 Next page