Cranksets

The new Gen 3 single-sided Stages Power L meter is built onto a non-drive-side Campagnolo Super Record crank arm. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm, 175mm Compatibility: This Campagnolo Record 12 Speed based Stages Power meter non-drive-side crank arm is only meant for use paired with a drive-side Campagnolo Super Record 12s crank arm. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others

SRAM's Force 22 Crankset uses unidirectional carbon arms with a forged aluminum spider and integrated bottom-bracket axle to ensure top-notch stiffness for awesome power transfer and exceptionally low weights. Experience phenomenal front shifting with SRAM's X Glide R chainrings that start out as 5mm-thick aluminum plates and then precision machined to eliminate all unessential material while retaining extreme stiffness. With so much great technology and 11-speed compatibility, they're a force to be reckoned with.

An attractive aluminum crank with hollow arms for lightweight, rigidity, and durability The newly designed crank arms offer an optimized balance between lightweight and efficiency. The crank, formed with hollow aluminum technology, is anodized with a beautiful gloss black anodized finish, giving it a luxurious look. The resin ribs on the back of the chainrings are SHIMANO 105's unique structural design that achieves both thorough weight reduction and crisp shifting performance. FEATURES - Optimal balance of stiffness, strength, weight and rotational performance - HOLLOWTECH II structure cuts weight yet maintains strength for better power transfer - Crank arm length: 160, 165, 170, 172.5, 175 mm - Gear combination: 50-34T, 52-36T - Q-factor: 148 mm

Shimano's new FC-RX810-2 crank balances weight and efficiency for mixed-terrain riding. Gearing options cater for the specific demands of gravel riding and to maintain tighter gear steps for maintaining pedaling rhythm. The 2x11-speed crank is available in a 48-31T, 40T, and 42T chainring combination and 170, 172.5, and 175mm crank arm lengths. - Gravel gear ratios preserve riding rhythm over rough surfaces with wider tires - Optimum gearing for mixed terrains and riding styles - Wide-range double - Gear combinations: 48-31T, 40T, 42T

The SRAM RED 1 AXS crankset features exceptional 1x drivetrain design. It provides the simplicity and tighter gearing range that is well-suited for road racing and riding in flatter terrain, where a wide range would go unused. The crankset is designed specifically for electronic shifting and can be upgraded to a power meter. - Single-ring drivetrain simplifies functionality and reduces weight - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control

The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately

The Shimano 105 double crankset balances weight and efficiency without sacrificing stiffness. It offers Rider Tuned performance with numerous gear combinations, and the wider gear pitch increases chain clearance with small gearings and allows for as short as 410mm chain stays. - Hollowtech II construction - 11-speed - 110mm Shimano Asymmetric BCD

- Material: Aluminum - Chain Compatibility: Super narrow HG 9 speed - Pedal Spindle: 9/16'' - Bottom Bracket: Not included - BB-UN26 or BB-UN55, 123mm

The Descendant 6K DUB crankset delivers consistent performance every time out. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. Optimized 6000 series forged aluminum arms support the X-SYNC 2 chainring to provide complete chain control. Now everyone can benefit from a new measure of durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Optimized 6000 series forged aluminum arms - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately BB Included: No Chainring BCD: SRAM Direct Mount Crank Intended Use: Mountain Number of Chainrings: Single Drivetrain Speeds: 12, 11, 10 Spindle Interface Type: SRAM DUB Chainline/Hub Compatibility: 135/142 MTB Hubs

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. - An elegant,integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Wide chainline crankset for bikes with up to 700x45c or 27.5x2.1" tire widths (43/30T chainrings only) - BB not included

Shimano's new FC-RX600-10 crankset balances weight and efficiency for mixed-terrain riding. Gearing options cater to the specific demands of gravel riding and to provide tighter gear steps for maintaining pedaling cadence. The 2x10-speed crank is available in a 46-30T chainring combination. - Wider gear range for long tours or unknown terrain - Optimum gearing for mixed terrains and riding styles - Gear combination: 46-30T

Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips. Compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most other popular alloy MTB cranks (except some alloy DH cranksets)

The Onyx cranks use an oversize super-hollow 24mm spindle, and a dependable 3-piece design with a super-strong invest cast spindle and pedal boss. These cranks are designed to take the strain, stress, and power of today’s most fierce riders. - Tubular heat-treated 4130 chromoly arms & axle - Strong, lightweight crank - RSD & LSD compatible - Investment cast pedal & spindle boss - Compatible with spline drive and bolt drive sprockets - Bore: 24 - Spindle Material: Steel - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 3-Piece - BB Style: Not Included - BB Included: No

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

Strength is how the X01 Eagle DUB crankset takes capability to places never before reached. It’s the strongest crank in the entire Eagle ecosystem, and it holds this status at a weight that is hard to fathom. It features industry-proven and rider-beloved DUB technology to radically simplify the relationship of spindle to bottom bracket, delivering unprecedented simplicity, compatibility, and durability. - The strongest crank in the entire Eagle ecosystem. - Master X01 colorway as part of Eagle Colorsystem—goes with all cassette and chain color options.

Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks and assorted alloy DH cranks

- FC-TY501-2 double crankset for 7 and 8 speed drivetrains - Simpler and faster shifting than triple cranks - 46-30 gearing, ideal for gravel, adventure, commuting & light touring - 48.8mm chainline, designed for 135mm QR and 142mm thru-axle frames - Crank bolts included - Requires LL123 square taper bottom bracket

The Spire Crank features a proven 2 1/2 piece system combined with a super-tough, box-section arm design that will remain stiff and dent resistant. A strong and reliable crank built to shred. - RSD & LSD compatible - Smooth and rounded ankle-friendly spindle boss - Bore: 22 - Spindle Material: Steel - Weight: 31.8oz - Drive Side Compatibility: Right and Left Hand Drive - Crank Arm Material: Steel - Crankset Style: 2-Piece - BB Included: No

- 42-32-22T - Alloy Outer Chainring - Alloy Forged Cranks - Square Taper

Our new enduro and downhill crank is precision machined from 7075 T6 aluminum in our Whistler machine shop. After more than two years of development and successful independent strength and fatigue testing at EFBE Pruftechnik in Germany, we’re excited to release these to everyone. Fits: - Enduro bikes with 73mm threaded and PF92 BBs - 133.5mm spindle length and 171.4mm Q-Factor - 148.5mm spindle length and 186.4mm Q-Factor - Compatible with SuperBoost bikes when paired with 0mm offset chainring Specifications: - Three-piece design - 30mm crank spindle diameter - Aluminum preloader - Machined from 7075 T6 aluminum - RF Cinch chainring mount ***** CHAINRING AND BB ARE NOT INCLUDED *****

SRAM's Rival 22 performs on par with more expensive cranksets, but at a bargain value. The crankarms are hollow and forged from 6066 aluminum for maximum strength with minimum weight. Because lightness is nothing without toughness, the Rival crankset proudly boasts SRAM's X Glide R chainrings that are specifically designed for use with the Yaw front derailleur. Durability and reliable shifting are your allies with Rival 22.

Take flight with the eeWings from Cane Creek. These titanium cranks are designed to keep up with the rigorous demands of the most aggressive trail and enduro mountain bikers—though they will benefit any rider who puts a premium on durability, stiffness and weight. - eeWings Mountain 165mm, 170mm or 175mm - 30mm Spindle - 10 year Warranty

The SRAM SX Eagle Crankset includes Eagle platform styling and features at an entry-level price point. SX Eagle cranks are compatible with all levels with SRAM Eagle drivetrain systems. - Offers the same chain retention performance as seen in all higher-level Eagle drivetrain cranks - 32T direct mount X-SYNC 2 steel chainring included - Aluminum crank arms - 11/12-speed compatible - Bottom bracket sold separately

Some riders test their limits more than others. For these riders, the GX Eagle DUB crankset allows them to go all in, every day they ride. The best aluminum crankset we make, engineered to deliver consistent performance every ride. Featuring our X-SYNC 2 tooth profile chainring for complete chain control, each tooth's thickness is toleranced and controlled to work seamlessly with the chain's inner and outer links. DUB technology's patented spindle design and bottom bracket provide a uniform approach to fitment, better sealing, and forward and backward compatibility. Simply put, the forged aluminum GX Eagle DUB crankset is the no-frills choice of riders who know. - Our best aluminum crankset - Direct mount interface compatible with chainrings across the entire Eagle Ecosystem - Master GX colorway as part of Eagle Colorsystem—pairs with all cassettes and chains, from Black to Gold to Rainbow to HardChrome and all-new Copper

Stunning Force AXS graphics on a carbon fiber arm: these crankarms are winners. Available in lengths from 165 to 177.5mm and in standard and Wide Q-factor so every rider can achieve their proper fit. The 8-bolt interface will fit any SRAM AXS spider or integrated chainring, with or without power. The light, stiff, and durable DUB spindle interface also fits nearly any frame. - 8-bolt interface compatible with power and non-power AXS spiders and integrated chainrings - DUB bottom bracket adds durability and simplicity - Carbon fiber arms with gloss finish

Trail riding can be tough on your gear. The ends of your alloy or carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips! Raceface crank boots come in two sizes Small and Medium plus the Next R crank specific boots. Small are designed to fit most alloy cranks and Medium are designed to fit most carbon cranks. Small boots are compatible with: - Race Face - Turbine Cinch - Atlas Cinch - Atlas (24mm Spindle) - Turbine (24mm Spindle) - Aeffect Cinch (175mm length ONLY) - Most popular alloy MTB cranks including Sram & Shimano (except some alloy DH cranksets) Medium boots are compatible with: - Race Face - Next SL Cinch (G3) - Sixc Cinch - Chester - Respond - Next/Next SL (24mm Spindle) - Sixc (24mm Spindle) - Most other popular carbon MTB cranks including Sram and assorted alloy DH cranks

Power every ride. We've taken the reliability, elegance, and features of Quarq's legendary crank-based power meter and dropped the barrier to entry once again. This new power meter platform is entirely contained within the DUB spindle for clean integration that fits more bikes than ever. It's invisible technology that adds minimal weight and will help you get to the finish line faster, and it can be used to upgrade any eTap AXS bike. - An elegant, integrated design - DUB-PWR spindle-based unit measures left-side power to calculate total watts - Proven Quarq reliability and accuracy - Long battery life (400+ hours) to power a season of rides - User-replaceable lithium AAA battery - DUB bottom bracket adds durability and simplicity - Waterproof (IPX7 waterproof to 1 meter for 30 minutes) - Lightweight (less than 40g heavier than standard crankset) - Simple and affordable power meter upgrade option - Right Arm/BB/Spider/Chainrings NOT INCLUDED

- 2-PIECE CRANKSET for 148 mm O.L.D. frames - DYNAMIC CHAIN ENGAGEMENT+ improves chain engagement and retention - Q-factor 178 mm - Direct mount chainring - Chain Line 55 mm - 1x12-speed

Dimension Cyclocross Arm Sets made of 6061-T6 aluminum. - Forged AL-6061-T6 - BB Not Included - Chainrings Not Included - 110/74 BCD - Drivetrain Speeds: 10, 9, 8 - Number of Chainrings: Double - Pedal Spindle: 9/16-inch - Spindle interface Type: Square Taper JIS - Weight: 590g

The Shimano SLX FC-M7130 Super Boost+ crankset for MTB offers the simplicity of a 1x drivetrain with the stability and compatibility of Hollowtech II technology. - Chainring sold separately - Hollow forged crank maximizes power transfer while limiting weight - Shimano's Hollowtech II technology provides the best balance of stiffness, strength, weight, and rotating performance - 56.5mm chainline - 181mm Q-factor - Number of Chainrings: No Rings Included - Chainline/Hub Compatibility: 157 Super Boost Hubs - Crank Intended Use: Mountain - Pedal Spindle: 9/16" - Spindle Interface Type: Shimano Hollowtech II - Drivetrain Speeds: 12 - Chainring BCD: Direct Mount - BB Included: No