Your Search: "bottom bracket tool"

This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools. - 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end - Includes the wrench only. Steel inserts are not included but can be purchased separately - 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts

The Wolf Tooth CAMO BashSpider is a crankset-mounted boost bash ring. This is a spider with an integrated bash ring for use with direct mount cranksets. The CAMO BashSpider pairs with a CAMO chainring to complete the CAMO System. - A CAMO chainring is required to complete this system - The "rolling" ability of the BashSpider allows the rider to move easily over obstacles - Bash rings that are mounted on the crankset are better supported than bash rings that are mounted to the frame or bottom bracket - M5 (minus 5mm - Boost) is dished towards the frame for 52mm chainline for bikes with Boost spacing - Will fit CAMO chainrings from sizes 28T-34T round or 30T-32T elliptical - Includes mounting bolts - Designed to work with Shimano cranksets that have a removable spider

Make simple trailside or roadside repairs with this multi-tool that has 14 functions. An 8mm hex head has a 4mm insert to fit each of the eight attached hex bits. With its slim design, this multi-tool can be stowed inside an EnCase System Storage Sleeve to be carried in handlebar ends as it was designed, or a mainstay on any home workbench. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (sold separately) - Magnet on bottom end of tool allows for storage on steel bike stands - Fits all standard mountain handlebars and most drop bars (except being ergonomic drop bars that have hard angles in the drops)

The Tool Wrap was designed to make trailside repairs quick and efficient. Featuring multiple flaps that allow you hang it from a wall, act as a changing area foot pad and more, the Tool Wrap is the perfect trailhead companion. - Top flap that can be shut in a car door for a mobile workshop - Bottom flap provides a work space to keep your parts and tools out of the dirt when working on the ground - Pocket layout is ideal for all the tools you need to build a bike - Aluminum eyelets for hanging up in your home or work shop - Dimensions: 68 by 46 cm (main body), 60 by 20 cm top flap (for car door), 32 by 60 cm bottom flap (work space), rolled up diameter size varies

In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter. - 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx) - Magnets & O-rings keep all parts in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar when ball detent swivel head is bent for extra torque - Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included) - Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators) - Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops) - Chain & Tire Plug tool compatible with all bicycle chains including 12-speed - Inserter tool and bacon strips plug holes in tubeless tires - Five strips included; refills available - Hardened steel pin for lifetime durability - Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench - Storage sleeves made of vibration-damping material and snug fit prevents rattling - Durable precision-machined aluminum end caps - Custom fit rubber flap can be trimmed to fit in smaller diameter bars - Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately) - Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually

Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets. - Installs: 6806 bearing - Inner step outer diameter: 29. 9mm - Outer diameter: 41. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)

Our GXP-LEFT open bore adapter is used to press 22x37 sealed bearings into SRAM GXP bottom bracket cups and direct fit frames like trek BB90. The adapter is machined with one step at 22mm OD, which fits into the center of the sealed bearing. - Installs: 22x37 (GXP) bearing - Inner step outer diameter: 21. 9mm - Outer diameter: 36. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" ACME threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 16 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Enduro 24x37 ceramic hybrid sealed bearing for 24mm crank spindle applications. Direct OEM replacement for most BB86/92, Trek BB90/95, and with all Wheels Mfg. PF30 outboard, BB30 outboard, and BSA threaded bottom brackets. - Dimensions: OD: 37mm / ID: 24mm / Width: 7mm - Imported - Sold individually (Requires two to service both sides of bottom bracket)

Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.

Enduro 24x37mm ABEC-5 sealed bearing. Direct replacement bearing for outboard bottom brackets for 24mm-spindle cranks. - Dimensions: OD: 37mm / ID: 24mm / Width: 7mm - Imported - Sold individually (Requires two to service both sides of bottom bracket)

Enduro angular contact sealed bearing for GXP non-drive-side bottom bracket cups. The inner race extends and matches the stepped down end of the GXP crank spindle. Direct OEM replacement for most BB86/92, Trek BB90/95, and compatible with all Wheels Mfg. PF30 outboard and BB30 outboard bottom brackets. - Dimensions: OD: 37mm / ID: 22mm / Width: 8mm - Install with inner race extension facing inwards - Imported - Sold individually

Grade 300 retainer bearings for headset and bottom bracket service - 5/32" ball diameter - 22 balls per retainer - Grade 300 Bearings - 10 Retainers/Bag

Wheels Manufacturing Sealed Bearing Extractor for GXP (22mm) bearings Fits: SRAM GPX bottom bracket bearings and other bearings with an inside diameter of 22mm

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Enduro 6806 ceramic hybrid sealed bearing. Direct replacement bearing for BB30/PF30 OEM systems as well as Wheels Mfg PF30 bottom brackets. - Dimensions: OD: 42mm / ID: 30mm / width: 7mm - Imported - Sold individually (Requires two to service both sides of bottom bracket)

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

The Wheels Manufacturing universal bottom bracket drift presses all current Wheels Mfg bottom bracket cups into your frame or bearing cups. The adapter is machined with multiple steps to fit common bottom bracket shell and bearing diameters listed below. Each step is laser etched with the diameter size. - Inner hole sized to fit 1/2" threaded rod. Not for use with Wheels Mfg PRESS-1 or PRESS-4 - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg Universal BB Press - Machined aluminum - Anodized Red - Sold individually - Drift can also be used as a frame bottom bracket shell sizing guide! Fits the following bottom bracket shell sizes: - BB30 (42mm) - PF30 (46mm) - BB86, BB92 (41mm) - BBRight (46mm) - BB386EVO (46mm) - Cannondale BB30A (42mm) - Cannondale PF30A (46mm) - Specialized Carbon OSBB (46mm) - Specialized Alloy OSBB (42mm) - TREK BB90, BB95 (37mm) - PF24 (41mm)

The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125". The gauge can measure: - bottom bracket width - bottom bracket shell inner diameter - crank spindle length - crank spindle diameter - bearing inner diameter Specifications: Measures crank spindle diameters: 22mm, 24mm, 29mm, 30mm Measures bearing inner diameters: 22mm, 24mm, 29mm, 30mm Measures bottom bracket shell inner diameters: 37mm, 41mm, 42mm, 46mm Measures bottom bracket shell widths: 61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm Measures crank spindle lengths up to 180mm

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups

Thin flange bottom bracket socket designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. This single-sided socket is used for installing and removing 48.5mm, 16-notch bottom bracket cups. The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto 1/2 inch unc press rod for secure and easy installation of thin flanged bottom brackets. Machined 6061 aluminum anodized red

- SRAM Thin Flange T47 Bottom Bracket Socket Designed to create a tight grip on thin flange bottom bracket to avoid slipping while torquing cups into bike frames. - This single-sided socket is used for installing and removing 52mm, 16-notch bottom bracket cups. - The socket has a machined 3/8" drive, which can be used to allow 3/8" drive torque wrenches to be attached and locks onto a 1/2 inch UNC press rod for secure and easy installation of thin flanged bottom brackets. - Machined 6061 Aluminum Anodized Red

Wheels Manufacturing Sealed Bearing Extractor for 24 x 37mm bearings Fits: - 2437 (Shimano Hollowtech II-compatible outboard bottom bracket bearings) - Other bearings with an inside diameter of 24mm

- Allows for quick and accurate positioning at the press of a button - Slides along 1/2" UNC threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings

The Wheels Manufacturing BBright Press Fit Bottom Bracket Adaptor for GXP Cranks adapts 24/22mm cranks (SRAM, Truvativ, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 8g/pr

Wheels Manufacturing BB30 Bottom Bracket Adaptor for GXP Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

Wheels Manufacturing BB30 Bottom Bracket Adaptor for Hollowtech II Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on BB30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin.

Wheels Manufacturing FSA PF30 Adapter for 24mm Spindle Cranks adapts 24mm Spindle Cranks (Shimano, FSA, etc.) to work on Pressfit 30 frames with FSA's PF30 bottom bracket installed. Simply tap the adapters into the 6806 bearing in the BB shell, install the spindle and cranks. Use our Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. - Machined engineering-grade Delrin - 48g/pr *NOTE: The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

BB86 threaded BB for Fat Bike PF41. Machined cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF41 - BB121, PF41 - BB132 - Bottom Bracket Shell Width (mm): 121mm - 132mm - Bottom Bracket Shell I.D.: 41mm - Crank Spindle Type: SRAM / Truvativ GXP - Crank Spindle Diameter: 22/24mm - Weight: 120g

Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red

- Similar to its big brother but at a fraction of the size. The new and more efficient Adjustable Press Stop Mini will make life easier for mechanics as it allows for quick and accurate positioning in places where space is tight at the press of a button. - Adjustable Press Stop slides along 3/8" ACME threaded press rod when the button is depressed and can be placed quickly to secure drifts, spacers, and cups when completing maintenance or installation of bike headsets, bottom brackets, and bearings. - Compatible with new and existing Wheels MFG press kits which utilize a 3/8" ACME threaded rod - Compatible kits include: Press-4, ST0006, Press-1 - Machined aluminum body - Anodized in Wheels MFG red. - Durable steel button - For use with 3/8" ACME threaded press rod (Sold Separately)

Thread together BB for 386EVO frames and 24mm diameter spindle cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BB386EVO, BB392EVO - Bottom Bracket Shell Width (mm): 86mm - 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 24mm - Over Bearing Width: 91.5mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 133g Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 24.00mm diameter spindle cranks: - BB386EVO - BB392EVO

Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 29mm spindle SRAM DUB-compatible cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. - Complete kit for one frame Includes: - (2x)Enduro BB86 to 29MM Dual-Row ABEC-3 Black Oxide Bearing - (2x)0.5mm crank spacer - (2x)1.0mm crank spacer - (2x)5.0mm crank spacer - (2x)2.5mm crank spacer - (2x)Dust seals

Expand your choice of cranks for use in frames with 41mm ID shells. Replace your bottom bracket with these dual-row flanged bearings and run 30mm spindle cranks in your frame. These bearings fit directly in frames with 41mm ID bottom bracket shells. Crankset spindle length must be longer than 104mm when used in a 86.5mm wide BB shell. - Sold individually (two needed per frame) - Bearings: Enduro Dual-Row ABEC-3 - Color: Silver - Bottom Bracket/Frame Interface: BB86, BB92, PF90, BB104/107, PF121, PF132 - Bottom Bracket Shell Width: 86.5mm – 132mm - Bottom Bracket Shell I.D.: 41mm - Flange OD: 42mm - Crank Spindle Diameter: 30mm - Over Bearing Width: 92mm in 86.5mm wide shell (dimensions include supplied silicone dust shields) - Weight: 36g

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g

External English (BSA) threaded road bottom bracket for 68mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacer (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro ABEC-3 - Color: Gray - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 111g

Wheels Mfg solution for running a 30mm spindle crankset in a BSA threaded frame. Machined aluminum cups thread in to a standard threaded frame and feature Enduro 6806 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Notes: - For use with BB30 Wide 30mm diameter cranks with a spindle length of at least 104mm. - Will not work with standard BB30 cranksets. PLEASE MEASURE YOUR BB30 CRANK SPINDLE LENGTH! - Use only bottom bracket tools compatible with 16-notch MegoEvo BB’s. (FSA MegaEvo and Park Tool BBT-29). - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: BB30 Wide, BB30a, 386EVO, Rotor 3D+, SRAM BB30 Wide - Crank Spindle Diameter: 30mm - Crank Spindle Length: At least 104mm - Weight: 102g

The Wheels Mfg PF30 Outboard bottom bracket will give you all of the same benefits as their well-loved Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in PF30 frames without the need for adapters. - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 158g

Thread together BB for 386EVO frames and 29mm spindle diameter SRAM DUB compatible cranks. Machined aluminum cups thread together for stability, increased bearing life, and simple installation and maintenance. No more creaking. Smooth operation. Fast bearing replacement. Bottom Bracket Includes: - BB Cups with bearings - 2x Silicone dust seals - 2x 0.5mm crank spindle spacers - 2x 1.0mm crank spindle spacers - 1x 2.5mm crank spindle spacer - Bearings: Enduro ABEC-3 - Bottom Bracket/Frame Interface: BB386EVO, PF30/83 - Bottom Bracket Shell Width (mm): 83mm - 92mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Diameter: 29mm - Over Bearing Width: 86.5mm in 86.5mm wide shell - Over Bearing Width Dimensions include supplied silicone dust shields - Weight: 126g Compatible with the following Bottom Bracket Standards (46mm BB shell ID, 86 – 92mm wide BB shell) and 29mm diameter spindle SRAM DUB compatible cranks: - BB386EVO - BB392EVO - BBRIGHT - PF30 with 83mm wide BB shell (downhill)

The Wheels Mfg BB30 Outboard bottom bracket will give you all of the same benefits as their other Outboard style BBs. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. Specifically designed for installing 24mm spindle diameter cranks (Shimano, FSA, Etc.) in BB30 frames without the need for adapters. - Bearings: Enduro ABEC-3 - Color: Red - Bottom Bracket/Frame Interface: BB30, Specialized Alloy OSBB - Bottom Bracket Shell Width (mm): 68mm - 73mm - Bottom Bracket Shell I.D.: 42mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 130g

BBRight™ Outboard bottom bracket for use with 24mm spindle diameter cranksets. The two machined aluminum cups thread together ensuring the bottom bracket remains stable in the frame, increasing bearing life, and simplifying maintenance. This means no more creaking, smoother operation, longer bearing life, and really quick bearing replacement. - Bearings: Enduro ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: BBRight™ Press Fit - Bottom Bracket Shell Width (mm): 79mm - Bottom Bracket Shell I.D.: 46mm - Crank Spindle Type: Shimano Hollowtech II, FSA MegaExo, RaceFace EXI - Crank Spindle Diameter: 24mm - Weight: 148g

By popular demand, Wheels Mfg. added this PF30 Outboard Bearing BB for use with 30mm spindle cranksets when used in PF30 frames. The two machined aluminum cups thread together keeping the bottom bracket stable in the frame, increasing bearing life and simplifying maintenance. Enjoy smooth operation, fast bearing replacement, and no more creaking. Note: Spindle length must be 103mm or longer when used in a 68mm wide shell; 108mm or longer when used in a 73mm wide shell. - Bearings: ABEC-3 - Color: Black - Bottom Bracket/Frame Interface: PF30, Specialized Carbon OSBB - Bottom Bracket Shell Width: 61mm – 83mm (Specialized Carbon OSBB with 61mm shell width will need additional 3.5mm cup spacers, sold separately) - Bottom Bracket Shell I.D.: 46mm - Over Bearing Width: 89mm in 68mm wide shell (dimensions include supplied silicone dust shields) - Crank Spindle Diameter: 30mm - Tool Pattern: 48.5mm x 16 notch - Weight: 151g

Wheels Manufacturing's PressFit 30 Bottom Brackets are an excellent direct replacement for SRAM, FSA and other PressFit 30 BBs. They are 100% made in the USA with machined aluminum cups for superior durability and your choice of standard sealed, angular contact or ceramic bearings (this model has sealed bearings). Wheels Manufacturing also exclusively uses Enduro bearings for excellent performance and longevity. Other great features of these stellar BBs include a 12% increase in bearing strength over standard models; serviceable bearings; dual exterior silicone rings for easy installation and to eliminate creaking; double-lip bearing seals; and even the highest quality grease appropriate for bottom bracket use and also more of it for smoother running and maximum durability!

Run 29mm spindle SRAM DUB compatible cranks in a BSA threaded frame. Machined aluminum cups thread into a standard threaded frame and feature Enduro 6806/29 ABEC-3 sealed bearings outboard of the BB shell. Fully serviceable. Bottom Bracket Includes: - BB Cups with bearings - 2 x Silicone dust seals - 2 x 0.5mm crank spindle spacers - 2 x 1.0mm crank spindle spacers - 1 x 2.5mm crank spindle spacer - Bearings: Enduro 6806/29 ABEC-3 - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68mm, 73mm, 100m - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Diameter: 29mm - Tool Pattern: 48.5mm x 16-notch - Over Bearing Width: 91.5mm in a 68mm wide shell - Weight: 102g Compatible with the following Bottom Bracket Standards and SRAM DUB compatible cranks with 29mm diameter spindle: - ISO/English or BSA Threaded (1.37 in x 24 TPI) - 68mm, 73mm, and 100mm BB Shell Width (if used in a 100mm wide shell, install the cups without the center plastic center sleeve)

External English (BSA) threaded bottom bracket for 73mm shells. Wheels Mfg uses only Enduro bearings and silicone seals for the most durable and smoothest bottom brackets available. Fully serviceable. Includes: (2) - Enduro Silicone dust seals (1) - 2.5mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 1.8mm aluminum BB cup spacers for use with 68mm wide BB shell (1) - 0.7mm aluminum BB cup spacers for use with 68mm wide BB shell (2) - 0.5mm crank spindle spacers (2) - 1.0mm crank spindle spacers (1) - Wave Washer Direct replacement for SRAM/Truvativ GXP bottom brackets! - Bearings: Enduro Angular Contact - Color: Red - Bottom Bracket/Frame Interface: ISO/English or BSA Threaded (1.37 in x 24 TPI) - Bottom Bracket Shell Width (mm): 68-73mm - Bottom Bracket Shell I.D.: 33.6-33.9 mm - Crank Spindle Type: GXP (SRAM, Truvativ, Etc.) - Crank Spindle Diameter: 22/24mm - Weight: 116g