Pedals

- Full Anodized finish - 16-12mm concave platform - 100mm x 105mm platform - CNC Alloy Pedal Body - Hollow Taper Scandium Enriched Steel Axle - Chamfered Leading Edges for Improved Clearance and Reduced Impact Forces - Oversized Sealed Full Compliment Inboard Industrial Bearing - Sealed Outboard IGUS Bushing - CNC Optimized, Full Sized Hex Head, Rear Loading Pins Improve Durability and Maintenence - Inboard Friction Seal Prevents Contamination and Reduces Unwanted Pedal Spin

The TRAIL FUSION pedals give you superior control of your mountain bike and far greater performance than traditional flat pedals. Their wide composite platform offers increased stability, better power transmission and ultimate comfort, allowing you to pedal with confidence and get the most out of your ride. And worry no longer when the trail gets technical: each pedal face features eight replaceable pins for maximum grip. Customize your look with one of the 5 available colors and forget your limits out on the trail!

What if you could take control of gravity? Lean into the bend as far as possible without losing contact with the trail, or fly over doubles with ease? Designed alongside our top athletes to push the limits of grip and control, our TRAIL ROC PLUS flat pedals feature a wide, concave forged aluminum platform and high-resistance axles for perfect stability and unparalleled toughness. With 10 adjustable aluminum pins and a 16mm profile height, they keep you glued to your bike through curves, jumps and technical sections. Make every run a new challenge!

- Large platform size with concave profile combines support with ultimate grip - Strong and lightweight one piece alloy body in eight color options - Forged chromoly axle delivers strength and durability - Shot-peen surface increases fatigue life and impact resistance - Material: Alloy - Platform Size (mm): 100 x 105 - Platform Profile: (mm) 16mm - Weight (g): ±395/set - Axle: Cold-forged Chromoly steel - Bearing/Bushing: Industrial bearing, IGUS bushing - Pins: 12 steel & 8 alloy pins per pedal - Virtual Concavity - Finish: Mottled / grunge anodized

A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)

The Burgtec composite pedal is everything you'd expect from a Burgtec pedal but at a more affordable price point. Uncompromised grip, rugged durability, the exact same sculpted simple lines, fully backed up with spares and at an affordable price. The best of both worlds can exist. - Nylon and Fibreglass Body - SCM415 Cromo Axle - All replaceable steel pins - 16mm Profile, 1mm Dish - 96mm x 102mm Platform - Weight: 376g

Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.

Thin is in when it comes to pedals these days but most thin bodied pedals on the market are much too expensive for the average cyclist. When we set out to make our new Gates Slim pedal we wanted to build a pedal that offered all the advantages of the higher end thin bodied pedal that you could buy without having to fork out over half your paycheck to bring a set home. The Gates Slim combines the best of our popular Gates BMX platform pedal and our thin bodied/sealed bearing Mesa plaform pedal into a durable and affordable package. Cr-Mo spindle, rebuildable loose ball bearings, impact grade nylon and a super thin profile should make the Gates Slim an easy choice for your next pedal. The Gates Slim pedals are ideal for any commuter/city build but is also great for BMX riders looking for a durable, thin and affordable plaform pedal. Oh yeah, they're also compatible with pedal straps making them great for the daily commute as well.

Everything you need to fully rebuild OneUp Composite pedals. MAINTENANCE INSTRUCTIONS 1. remove outer and inner end caps with 6mm hex key. 2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut. 3. pull axle out of pedal body 4. push inner bearing out with 6mm hex 5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it. 6. remove axle seal (take note of direction) REPLACEMENT INSTALL 1. grease new bushing and axle. Place bushing on axle and push it into pedal body. 2. replace pedal seal (thicker portion near flange of axle) 3. grease and place new bearing back into pedal body 4. slide axle through pedal body and bearing 5. replace axle nut 6. replace both end caps

Discover the world of clipless pedals with the KEO CLASSIC 3. The easily adjustable tension makes clipping in and out smooth and simple, with the ability to increase tension to fully appreciate the pedal and all its advantages. - Technology: Spring - Cleats: Keo Grip - Retention: 8 to 12 - Body: Composite - Spindle: Chromoly - Platform Material: Composite - Platform area: 400mm² - Platform width: 50mm - Q Factor: 53mm - Stack height + cleats: 17.8mm (11.5 + 6.3mm) - Weight (pedal): 140g - Weight (pair + cleats): 350g

Customize your 5050 pedals with Crank Brothers' Plate Kit. These anodized beauties bolt onto your existing pedals to give you style to match your skills.

- Pedal Carbon blade Kit TIME XPro QTY 4

- Built with an aluminum body and oversized axle to handle the roughest trail conditions and biggest descents. - TIME's famous easy entry and exit system allows riders to easily put a foot down when needed and clip back in fast. - The open, self-cleaning design keeps the pedal clean so its function is not compromised by dirt, debris, or mud. Specs: - Pedal Material: Aluminum - Pedal Weight: 238g - Cleat Compatibility: ATAC - Spindle Material: Steel - Pedal Bearing: Ball bearings - Pedals Thread: 9/16"

- The ATAC EASY 10° cleat works with all TIME mountain pedals. - Included with mountain pedal models numbered "2" and "4." - Release angle of 10 degrees and is compatible with all two-hole cycling shoes. - Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.

- Works with all XPRO and XPRESSO pedals. - Not included with new XPRO and XPRESSO pedals. - This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. - Compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.

The new OOZY Reboot Pedal - 100% the same award-winning OOZY Pedal platform that SPANK Industries has been manufacturing for years, but now with crank boot compatible axle and fresh new full colour anodized finishes for 2021. - Super slim 12mm for maximized pedal clearance - CNC weight-optimized trail pedal at 360g per set - Forged alloy body is shot-peened and anodized for increased durability - Equipped with hollow taper Chromoly steel axles for unmatched strength - Sealed bearings and IGUS bushings - 18 preassembled pins in virtual concavity for ultimate grip - Recommended for: ASTM 5, All mountain, enduro, trail, E-Bike - Crank boots compatible axle

BREAKTHROUGH POWER Built on the cutting-edge SPEEDPLAY pedal platform, POWRLINK ZERO delivers reliably accurate power and cadence data in a race-proven pedal system. This powerful combination creates an unrivaled power pedal that helps cyclists optimize performance to break through to the next level. A POWERFUL COMBINATION POWRLINK ZERO combines proven sports science and years of industry-leading research with the superior adjustability, increased power transfer, reduced weight, and enhanced aerodynamics of the SPEEDPLAY platform to create a pedal system that delivers a distinct performance advantage. BETTER YOUR BEST Accurate to +/- 1%, POWRLINK ZERO’s internal gyroscope removes cadence variation to measure power output more precisely. Combined with Wahoo’s sports-science based algorithms, cyclists get accurate values they can use to achieve next-level performance gains. LASTING POWER POWRLINK ZERO is made with premium materials for superior strength-to-weight ratio – making it perfect for enduring efforts. In addition, the rechargeable battery lasts up to 75-hours per charge to give you the power to go long. Really long. In the box - Left Power Pedal and Compatible Right Pedal - Washer (x2) - Cleat Assembly - Screw Packet - Charging Cable and Clips - Quick Start Guide - Important Product Information Guide Additional Tools Required for Assembly: #1 and #2 Philips Head Screwdriver and 8mm Allen Wrench"

- Dial your fit with Spoon flat pedals available to fit from kid's sizes - 90mm = US shoe sizes 6 & under / 100mm = US shoe sizes 7~10 / 110mm = US shoe sizes 11+ - Forged chromoly axle which delivers strength and durability - 16mm-12mm concave profile with 20 preassembled steel pins for added grip - Shot-peened and anodized to enhance fatigue life - Recommended for: ASTM 5, All mountain, Trail, Enduro, free ride, DH, E-Bike, KIDS (90x105) - PLATFORM SIZE (mm): 90x105 - PLATFORM PROFILE (mm): 16—12 concave profile - WEIGHT +/- (g): 360 / 400 / 420 per set - AXLE: cold forged chromoly steel - BEARING/BUSHING: industrial sealed bearing, IGUS bushing - PINS: 20 steel pins (per pedal) - TECHNOLOGIES: Chamfered leading edges - MATERIAL: MGR extruded alloy body, CNC optimized

Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included

Choose to ride flat or clipped in for city commutes and casual rides around town. This hybrid composite pedal with its 2-sided entry allows you to do both. It features premium bearings and a double seal system, diamond plate pads for traction, and molded pins and ribs for grip. - Premium brass cleats with shims included - Q-factor: 57mm - Release angle: 15° / 20° - Forged 435 Chromoly steel spindle - 300 series stainless steel spring - 5-year warranty - 331g per pair

- Christophe Vintage toe-clip - Celebrating 130 years of history - Steel cage - Chrome finish - 01: S/M; -02: L/XL

The Mallet 2 pedal from Crank Brothers is ready to drop the hammer. No, seriously, this thing has been redesigned and rebuilt from the ground up, and it's a whole new creature. Durability and a lightweight aluminum body take the center stage in this versatile pedal that's equally at home shredding singletrack and providing a platform for your sneakers while you ride to class. The Mallet 2 offers a flat pedal feel and clipped-in control simultaneously for the best of both worlds and performance you can feel. And, with a customizable float and release angle, your body will thank you with miles and miles of fun.

- Super thin-profile platform pedal designed for freeride, BMX, and urban riders - Impact grade Nylon construction with in-molded surface pegs (10 per side) for superior traction and longevity compared to cheaper polycarbonate alternatives - 15mm height/100mm width - CrMo spindle axle with a serviceable loose-ball bearing system for easy maintenance - Design compatible with most foot-retention strap systems including Gates Straps (available separately) - Weight: 345g

The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat

The Bladerunner is a perfect platform pedal for any application, this super minimized design at 11mm thin with a platform large enough for incredible stability. The Bladerunner thrives in the most technically challenging conditions possible. When ground clearance is a priorit you will be hard pressed to find a pedal more suitable for rocky terrain.

Designed and manufactured by PEMBREE in the UK with the strictest environmental standards, the PEMBREE the D2A pedal is totally carbon neutral. PEMBREE components are hand-crafted and fully made in England. All components, from the aluminium all the way to the bearings, are sustainably sourced and easily recyclable. PEMBREE D2A is designed as the ultimate racer's flat pedal. Balancing perfectly between traction, strength and weight. Riders of the D2A benefit from unrivaled grip via PEMBREE designed and manufactured Traction Pins, the strength of a stainless-steel spindle and premium bearings. - Spindle: Stainless Steel - Pedal Body: Aluminium - Traction Pins: Stainless Steel - End Cap: Aluminium - Inner Bearings: IGUS JSM - Outer Bearings: Sealed Ball Bearings - Pins: 10 Traction Pins per side - Body Dimensions: 100mm x 110mm x 15mm (centre) - Weight: 446g - Warranty: 5 years, 2 years bearings

Size specific magnesium platform pedal provides optimal shoe/pedal interface. Details - Magnesium pedal body for weight reduction - Optimal surface area - Minimal body profile - 16mm thin - Concave pin profile & 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu) - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Serviceable, pedal refresh kit found here Specs - Adjustable pins: 10 per side - Body material: AM60B Magnesium Alloy - Endcap: T15 - Footprint: 114mm x 111mm - Inner bearing type: Igus Bearing - Max rider weight: No restriction - Outer bearing type: Double Cartridge Bearing - Shoe size: US 10-15 // EU 43-49 - Spindle material: Forged SCM 415 Chromoly Steel - Warranty: 5 years - Weight: 386g per pair

• Chromoly spindle with sealed cartridge bearing. Sealed bearing are what keep your pedals running smoother longer! • Wide platform for excellent power transfer ideal for mountain biking • Also ideal for use with regular shoes for urban riding • Set screw style replaceable pins • 9 pins per side • Magnesium body (382 g/pr)

Everything you need to keep those Crank Bros pedals spinning freely is found in their Pedal Rebuild Kit. Each kit includes parts and instruction to rebuild one pair of Crank Bros. pedals.

Throw a leg over your downtown commuter and push confidently with Electra's City Alloy Pedals. The full aluminum body means these pedals are lightweight and durable, while the grip material ensures your foot stays planted on the platform in all conditions.