Filter By:
- Bikes (2)
- Parts (123)
- Accessories (238)
- Clothing (2)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Your Search: "headset tool"
$71.99
The RT-2 Head Cup Remover makes headset cup removal easy. The tool is pulled through the frame until the flared ends snap in behind the cup. A blow on the tool head removes the cup.
• Designed for the 1-1/4 inch and 1-1/2 inch headest standards
• Also easily removes cups on one-piece cranks
• Strong, heat-treated alloy steel with a nickel finish
SHIS Terminology: The RT-2 will remove cups of ZS44, ZS49, ZS55, ZS56, EC49 and EC56 headsets.
$44.99
Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-15 is a dual sided wrench that features a 32mm opening on one end and a 36mm opening on the other.
$39.99
Park's versatile Headset Wrench is constructed from hardened, laser-etched steel for the maximum in durability and precision. The HCW-7 is a dual sided wrench that features a 30mm opening on one end and a 32mm opening on the other.
$47.99
Park's Adjustable Pin Spanner is the perfect tool for adjusting bottom brackets with threaded cups that have pin holes. It will also work on headset cups with holes and freewheel lockrings with them, too. This fine tool is made of chrome-plated steel and boasts hardened replaceable pins.
$79.99
Park Tool's 750.2 Centering Cone Adaptor increases the size of the centering cone of the HTR-1 and HTR-1B Headtube Reaming and Facing Sets. The 750.2 will allow you to use the HTR-1(B) to ream and face head tubes designed to accept IS, ZS, and 1.5-inch EC headset standards.
Before reaming or facing, make sure you have the correct cutting tool and pilot for the headset standard(s) you are using. Please refer to our product pages for cutters and pilots for this detailed compatibility information.
$109.99
The lever setter is a unique tool that works in conjunction with our HAG (or other hanger allignment tool) to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Use the HAG indicator to set levers the same from one side of the bar to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride.
Compatibility:
Requires a star nut or compression plug with a M6x1 thread.
Works with road and mountain shifters and brake levers.
Compatible with most hanger alignment tools on the market.
Recommendations:
It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.
$899.99
To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork’s crown race seat. Park Tool's Crown Race Cutting Tool is a professional-quality machining tool for milling both the outer edge and lower surfaces of the crown race seat.
• Includes high speed steel cutters and adjustable collets to machine 26.5mm and 27.1mm crown race seats on 1” forks and 30.1mm crown race seats on 1-1/8" forks
• Unique adjusting system allows a tight fit of the tool on any fork, threaded or unthreaded (even forks with externally butted steerer tubes), ensuring a smooth, accurate cut and proper alignment of the fork in the frame
• Cutter sized for 1-inch standard is part #845 (sold separately)
• Cutter for 1-1/8 inch standard is #846 (sold separately)
$1,329.99
A professional level tool set designed and built for portability. The EK-3 is perfect for team and event mechanics or the home mechanic who wants the ultimate portable tool kit. Neatly organized in Park Tool's world-famous BX-2.2 Blue Box Tool Case, this tool kit features 56 of their best tools to do hundreds of repair and maintenance tasks. Plus, the bomb-proof Blue Box features pockets, pouches, straps and open space to add more tools and parts!
Kit Includes:
- ATD-1.2 Adjustable Torque Driver
- AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm
- BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups
- BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive
- BO-2 Bottle Opener
- CC-4 Chain Checker
- CN-10 Professional Cable and Housing Cutter
- CNW-2 Chainring Nut Wrench
- CP-1.2 Cassette Pliers
- CT-3.3 Chain Tool
- CWP-7 Compact Universal Crank Puller
- DCW-1 Double-Ended Cone Wrench: 13/14mm (2)
- DCW-2 Double-Ended Cone Wrench: 15/16mm (2)
- DCW-3 Double-Ended Cone Wrench: 17/18mm
- DSD-2 Derailleur Screwdriver: Cross Tip
- DSD-4 Derailleur Screwdriver: Flat Blade
- DT-2 Rotor Truing Fork
- FR-5.2H Cassette Lockring Tool with Handle
- GSC-1 GearClean Brush
- HCW-15 36mm/32mm Headset Wrench
- HMR-8 Shop Hammer
- HT-8 8mm Hex Tool
- HXS-1.2 Hex Wrench Set
- LP-7 Utility Pliers
- MLP-1.2 Master Link Pliers
- MW-8 Metric Wrench: 8mm
- MW-9 Metric Wrench: 9mm
- MW-10 Metric Wrench: 10mm
- PAW-12 12" Adjustable Wrench
- PW-4 Professional Pedal Wrench
- RR-12 Tape Measure
- SW-0 Precision Spoke Wrench: .127"
- SW-2 Precision Spoke Wrench: .136"
- SZR-1 Shop Scissors
- TL-6.2 Steel Core Tire Levers
- TWS-1 Torx Compatible Wrench Set
$431.99
Park's HHP-2 accurately aligns and presses 1-, 1-1/8-, 1-1/4- and 1.5-inch headset cups into your frame's headtube. It features a quick-release design for fast tool installation and removal, extra-long handles for superior leverage and stepped bushings for precise cup alignment. This versatile tool also presses cartridge bearings and cups into one-piece bottom bracket shells and holds fixed-cup wrenches in place when removing or installing adjustable-type bottom brackets.
$663.99
- Precision tool for quickly and easily removing the headset crown race from the crown race seat of the fork
- Fully adjustable, allowing precise, independent positioning of each blade around the crown race for flexibility in fitting around crown race interferences
- Works with 1,1-1/8,1-1/4,1.5" forks (suspension or rigid) and crown races with outside diameters up to 64mm
- Accepts steerers up to 430mm
- All steel construction for long life
$24.99 - $26.99
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$49.99
The 4th edition of the Big Blue Book of Bicycle Repair is updated with the latest information, procedures and techniques and covers everything from minor adjustments to complete overhauls. The BBB-4 features clear, step-by-step instructions, high quality color photos and useful charts and graphs to thoroughly explain and demonstrate hundreds of repairs. Written by one of the world’s leading authorities on bicycle repair and maintenance, Park Tool Director of Education, Calvin Jones, the Big Blue Book is the perfect reference guide for nearly any level mechanic and every bike.
New information and topics included in the BBB 4th edition:
- 12-speed and 1x drivetrains
- Tubeless tires
- Disc brakes
- Electronic shifting
- New wheel building content
- Updated headset and bottom bracket standards
- Updated torque specifications
- Updated troubleshooting tables
$1,129.99
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard.
Includes:
• 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm)
• 690 Facer
• Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading
SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.
$39.99
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer.
Top caps are compatible with all 1-1/8" aluminum steerer tubes.
The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.
CHECK FORK COMPATIBILITY
$137.99 - $219.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$154.99 - $214.99
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 110 Series has light, tough, and beautiful machined 7075 T6-aluminum cups that are contoured and relieved for even more gram shaving and strength. You also get top-quality split-lip sealed stainless-steel bearings, a carbon-friendly captured compression ring and a dual-sealed crown race and complete upper bearing seal to keep the grease in and the dirt out. What's more, the seals are low-friction to improve steering performance and there are no loose headset parts so maintenance is easy. The 110 comes with an amazing 110-year, no-questions-asked warranty too!
$49.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
$19.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
$19.99 - $49.99
Help your bearings run smoother and longer with Finish Line's Ceramic Grease. Its special blend of ceramic particles, Teflon and synthetic oils helps lube your bearings and dissipate heat, guaranteeing longer life and better function. Plus, it works great on stems, posts, cables and other threaded assemblies, too.
- Optimizes performance and efficiency of bottom brackets, hubs and headset bearings
- Use on stems, seat posts, cables and any threaded assemblies
- Prevents rusting even when exposed to salt water
- Clear and non-staining
$39.99
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer.
Top caps are compatible with all 1-1/8" aluminum steerer tubes.
The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.
KIT INCLUDES
- EDC TOP CAP
- EDC steerer plug
- 2x 1mm, 3mm, & 5mm Headset Spacers
$49.99 - $69.99
- A Threadless no tap install option that lets you store the EDC V2 Tool inside your stem/steerer tube without threading your steerer tube
- The Threadless Carrier replaces your star nut and lets you preload your headset with a bolt, while also creating a space for the EDC Tool.
- Easy to install in less than 10 minutes.
- Compatible with EDC V2 Tool (You must use the small EDC V2 Storage Capsule with the Threadless Carrier.) The tire plug and bacon strips fit within the small storage capsule.
- Chain pliers are not compatible with the threadless carrier set up.
- The EDC Threadless Carrier is NOT compatible with V1 EDC Tools (Green Multi-Tool)
$39.99
A new headset gives you a new lease on life. This is the upper part of an integrated headset for a 44mm headtube.
- Lower part of the headset sold separately
$22.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$20.49
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$19.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$88.99
- Headset drift for sealed bearing installation press - Drift is machined with steps to press in headset cups that use either 1-1/8" or 1-1/2" bearings, but may be used for other cups with odd-sized sealed bearings - Compatible with bearing presses using 1/2" diameter rod, such as Wheels Mfg Headset Cup Press (PRESS-8)
$27.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$5.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$19.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$5.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$13.49
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$20.49
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$19.99
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
$27.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$22.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$5.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$27.99
Aluminum headset stack spacers precision cut to ensure proper headset function.
- Precision cut for proper function
$11.99
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
$18.99
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
$84.99
Service and replacement parts specifically for Trek Knock Block technology.
Get your bike back on the trail with the headset parts you need.
PRODUCT DETAILS
- Trek proprietary headset components compatible with Trek Knock Block models
- 62-degree headset fits 2020 & 2021 Supercaliber and 2021 Procaliber
- Includes crown race, bearings, top cover, frame chip & fastener
- Frame chip has display tabs to connect Bosch Kiox Mount sold separately
- Must be paired with Knock Block stem and Knock Block spacers
- Knock Block headset spacers not included
$18.99
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
$19.99
Carbon fiber headset stack spacers, precision cut to ensure proper headset function.
- Compatible with all threadless and threaded headsets
$84.99
Service and replacement parts specifically for Trek Knock Block technology.
Genuine replacement parts
Get your bike back on the trail with the headset parts you need.
- Trek proprietary headset components compatible with Trek Knock Block models
- 72-degree headset fits 2021 Slash 29
- Includes crown race, bearings, top cover, frame chip & fastener
- Frame chip has display tabs to connect Bosch Kiox Mount sold separately
- Must be paired with Knock Block stem and Knock Block spacers
- Knock Block headset spacers not included
$27.99
Replacement headset bearings from FSA.
- Compatible with most Trek MTB integrated headset systems
- Sealed bearing for long life
- Compatible with Knock Block Headsets
$49.99
This is the Top Cover for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
$59.99
This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
$42.99
This is the Integrated Bottom Bearing for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$104.99
This is the Bottom External Cup for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$69.99
This is the Integrated Bottom Bearing for the Cane Creek 110 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$59.99
This is the Bottom External Cup for the Cane Creek 40 Series headset. Please contact us if you have any questions about which parts are correct for your headset.
$29.99
- Tool Carrier
- Sleek tool holder designed to securely hold the Park Tool MTB-5 Multi-Tool and TPT-1 Tubeless Tire Plug Tool
- Can be mounted or strapped to most bike frames (hardware not included)
$44.99
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 16-notch tool fittings, including Shimano XTR BB93, Dura-Ace BB9000, and Token bottom brackets. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive.
The BBT-49.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage.
Fits 16-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 39-40 mm and a minor diameter (inside of notches) of 37.6 mm, including:
- Shimano XTR BB93
- Shimano Dura-Ace BB9000
- Token
Also fits chainring lockrings on Shimano STEPS square spindle e-bike systems including:
- E6000
- E6002
- E6050
- Replacement for Shimano TL-FC38 tool
- 3/8" drive fitting
$56.00
Everything you need to keep your Penthouse Flat MK5 pedals feeling like new.
Includes:
- Small Bushing and Bearing Removal Tool
- Small Bushing Press Tool
- Big Bushing Press Tool
- Bearing Press Tool
$29.99
- 80 gram, 6-function multi-tool.
- Made from heat-treated tool steel for strength and lasting performance.
- Small ergonomic design fits anywhere but performs like full size chain tool.
- Includes 5mm hex wrench, flathead screwdriver and 1-11 speed chain tool with integrated 3.2, 3.3, and 3.5 mm spoke wrenches and slot behind chain tool anvil is a perfect Presta valve core wrench.
The right multi-tool can be the difference between finishing the most epic ride of your life and going for the longest walk of your life carrying a busted bike. Pedro's has drawn upon its experience making professional shop tools to make sure you finish that epic ride. Pedro's Six-Pack Chain Tool is a super compact, professional quality, minimalist multi-tool great on its own or as a supplement to other multi-tools lacking a chain tool or spoke wrenches. The Six-Pack Chain tool is made from heat-treated tool steel for strength and lasting performance. The small ergonomic design fits almost anywhere but performs like a full size chain tool. The Six-Pack Chain Tool Multi-Tool weighs 80 grams and has 6 functions including 5mm hex key, a flat blade screwdriver, and shop quality 1-11 speed chain tool with integrated 3.2, 3.3, and 3.5mm spoke wrenches, and slot behind chain tool anvil is a perfect Presta valve core wrench. Backed by Pedro's lifetime warranty.
$104.99
This is the Bottom for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
- For 1.5-inch crown race diameter
- Stack height: 4mm
- 54 grams
$49.99
A precision CNC-machined aluminum tool for the installation and removal of select threaded bottom brackets with 12-notch tool fittings, including SRAM BSA DUB, Race Face Cinch, Rotor BSA30, and others. Manufactured in-house by Park Tool, anodized for easy identification and featuring a ratchet/torque wrench-compatible 3/8" drive.
The BBT-79.3 features integrated threads for full compatibility with the Park Tool BBT-RS Bottom Bracket Tool Retaining System (sold separately). The BBT-RS uses an adjustable spring-based tension system to apply consistent, adjustable pressure to the tool, ensuring full engagement with the tool fitting and preventing slippage.
Fits 12-notch threaded bottom bracket tool fittings with a major diameter (outside of notches) of 45–47 mm and a minor diameter (inside of notches) of 44 mm, including:
- SRAM BSA DUB
- Race Face Cinch
- Rotor BSA30
- Zipp Vuma
- Hawk Racing BB3086
- and more
- 3/8" drive fitting
$116.49
This is the Short Top Cover for the Cane Creek 110 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.
- For 1 1/8-inch fork/headset
- Stack height: 8mm
- 53 grams
$19.99
If there ever was an underrated tool that you probably don’t have in your bike tool kit, it has to be the Valve Core Wrench. Designed to remove or install Presta Valve and Schrader Valve cores, this tiny tool can truly make the process of installing or refilling flat-prevention liquids and gels quick and painless. The versatility of the valve stem tool supports both valve types found on mountain bikes, road bike, commuting and electric bikes – never be stranded on your commute thanks to the Valve Core Wrench. Available separate, or found in our Team Edition and Ride Prep Tool Kits.
- Fits Presta Valve and Schrader Valve bike tubes
- File tread grip creates a comfortable and ergonomic grip
- CRV tool steel metal core makes this a one-time purchase
- Aides in the overhaul of suspension forks and rear suspension shocks
- Found in our Ride Prep and Team Edition Tool Kits
- Limited Lifetime Warranty
$61.00
Tool Clamp Tips for use with the RockShox Rear Shock Clamp Tool.
- For rear shock damper servicing
- For use with the RockShox Rear Shock Clamp Tool
- Compatible With: Super Deluxe A1-B2 (2017-2021), Thrushaft C1+ (2021+)
$514.99
Two years in the making, this chain tool is built to stand the test of time.
The threaded body and lead screw are made from cro-moly and receive a low friction powder vapor deposition (PVD) coating to give it a silky feel you've never felt in a chain tool before. Large handles ensure ease of use with any chain. The freely rotating pin is made from a shock rated tool steel and will likely last as long as the rest of the tool. The chain tool comes with a spare chain pin in the handle and they are cross-compatible with Shimano and Campagnolo pins.
The greatest part of the chain tool has to be the interchangeable mid plate. The saddled part that holds the chain in position can be swapped to work with nearly anything the industry comes out with. This ensures that your investment won't become obsolete when company "X" comes out with an 18-speed cassette in 20 years.
The tool also peens Campagnolo 11 and 12 speed chains to factory specs using a backstop that threads into the backside of the tool as a stop.
Compatible with 9-12 speed chain, including the new 12-speed chains from Campagnolo and Shimano's XTR 9100.
Page 1 of 7
Next page