Your Search: "bike tool kit"

Park Tool's Power Lift Shop Stand is the biggest, strongest, stiffest, most versatile repair stand ever built. Park created the PRS-33 with professional mechanics in mind, blending a massive upright with the ease and convenience of a powered lift. The size and strength ensures a super rigid workstation able to go higher than ever before and the power lift allows effortless height adjustment for any bike up to 120 pounds (54kg). It's perfect for lifting heavy electric bikes or for mechanics with lifting limitations, but also great for easy height changes during a repair or set up. The PRS-33 is a single arm stand but can be made into a double arm stand with the addition of part number PRS-33 AOK (sold separately). • Adjustable height from 6” to 78” (16cm-198cm) • Integrated work tray • Integrated accessory bar to hang wheels, air hoses, lights and just about any other accessory you can think of • Electric motor able to smoothly lift 120 pounds (54kg) • Oversized gussets to mount stand directly to the floor or to part #135.33 115 pound (52kg) Base Plate (sold separately) • 100-3D Micro Adjust clamp • Full height with base and accessory bar: 94" (239 cm) • Not using the accessory bar will reduce the height by 2-3/4"

- Adjustable height from 9" to 78" (23cm-198cm) - Integrated work tray and PRS-33TT Tool Tray Included - Integrated accessory bar to hang wheels, air hoses, etc - Electric motor to smoothly lift up to 120 lbs (54kg) - Oversized guessets to mount stand directly to the floor - 100-3D Micro Adjust Clamp - Two #470 Oversized Machine Thread Hooks - Full height with base and accessory bar: 94" (239 cm); not using accessory bar reduces height by 2-3/4" - Base plate 135-33 (900988-01) is not included

The PK-5 includes over 90 of our best shop tools selected with versatility in mind. A great way to outfit a pro bench or to set up a dream home workshop. The PK-5 is an impressive, professional set of specialty tools that can help you perform hundreds of bicycle repair and maintenance procedures. An investment you'll use and appreciate for decades. Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - AWS-3 Three-Way Hex Wrench Set: 2, 2.5, 3mm - BBT-10.2 Adjusting Cap Tool: For 8-Spline Hollowtech II - BBT-22 Bottom Bracket Tool - BBT-69.2 Bottom Bracket Tool - BO-2 Bottle Opener - CBW-1 Open End Wrench: 8/10mm - CBW-4 Open End Wrench: 9/11mm - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DAG-2.2 Derailleur Hanger Alignment Gauge - DH-1 Dummy Hub - DP-2 Threaded Dummy Pedal - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HMR-8 8 oz. Shop Hammer - HXS-1.2 Hex Wrench Set - MLP-1.2 Master Link Pliers - NP-6 Needle Nose Pliers - PAW-6 6" Adjustable Wrench - PH-1.2 P-Handle Hex Wrench Set - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SBC-1 Spoke, Bearing and Cotter Gauge - SBS-1.2 Socket and Bit Set - SCW-13 13mm Shop Cone Wrench - SCW-14 14mm Shop Cone Wrench - SCW-15 15mm Shop Cone Wrench - SCW-16 16mm Shop Cone Wrench - SCW-17 17mm Shop Cone Wrench - SCW-18 18mm Shop Cone Wrench - SCW-19 19mm Shop Cone Wrench - SP-7 Side Cutter Pliers - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SWR-8 3/8" Drive Ratchet Handle - SZR-1 Shop Scissors - TL-1.2 Tire Lever Set - TL-4.2 Tire Lever Set - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set - UP-SET Utility Pick Set - VC-1 Valve Core Tool - ZP-5 5" Flush Cut Pliers

The all-around trailer, jogger, and stroller, offer comfort and flexibility for families with an active lifestyle. Includes Standard and Comfort features. For active parents Thule Chariot Cross gives you the freedom to enjoy almost any outdoor adventure with your child. It is designed for active families who want a versatile, tough, and stylish bike trailer, and who love being outdoors all year round. The all-round trailer and stroller offer comfort and flexibility for families with an active lifestyle, and the optional Jogging Kit (sold separately) makes it a great training partner. An extra large cargo bag provides additional space for what you need to bring. Includes Standard and Comfort features. Features: - 4 activities—designed to excel when you bike, jog, stroll, and ski - Compact fold—makes it easy to bring the carrier with you - Reclining seat—convenient one-hand recline - Thule VersaWing system—enables quick and easy conversion between activities, regardless of the kit used - Adjustable suspension—leaf spring suspension ensures a smooth ride - Comfortable padded seats—removable and easy to clean - XL cargo space—can be stored away for increased kick stride while jogging - Rear light for added visibility and safety included - Easily adjustable ventilation vents optimize airflow and climate control and removable clips increase ventilation when used with a rain cover - Thule Click n' Store—convenient on-board storage of strolling, jogging, and cycling kit while changing between activities Technical specifications: - Weight capacity: 100 lb - Folded dimensions: 34.2 x 31.5 x 14.7 in - Weight: 31.9 lb - Sitting height: 27 in - Door pass-through: 31.5 in - Safety harness: 5-point - Meets safety standards: Yes - Children: 1 or 2

The lightweight trailer, jogger, and stroller, designed for everyday activities. - 4 activities—designed to excel when you bike, jog, stroll, and ski - Compact fold—makes it easy to bring the carrier with you - Thule VersaWing system—enables quick and easy conversion between activities, regardless of the kit used - Suspension—makes the ride comfortable for both parent and child - Rear light for added visibility and safety included - Easily adjustable ventilation vents optimize airflow and climate control and removable clips increase ventilation when used with a rain cover - Thule Click n' Store—convenient on-board storage of strolling, jogging, and cycling kit while changing between activities Technical specifications: - Weight capacity: 100 lb - Folded dimensions: 34.2 x 31.5 x 14.7 in - Weight: 27.5 lb - Sitting height: 27 in - Door pass-through: 31.5 in - Safety harness: 5-point - Meets safety standards: Yes - Children: 1 or 2

A professional level tool set designed and built for portability. The EK-3 is perfect for team and event mechanics or the home mechanic who wants the ultimate portable tool kit. Neatly organized in Park Tool's world-famous BX-2.2 Blue Box Tool Case, this tool kit features 56 of their best tools to do hundreds of repair and maintenance tasks. Plus, the bomb-proof Blue Box features pockets, pouches, straps and open space to add more tools and parts! Kit Includes: - ATD-1.2 Adjustable Torque Driver - AWS-1 Three-Way Hex Wrench Set: 4, 5, 6mm - BBT-9 Bottom Bracket Tool for 16-Notch External Bearing Cups - BBT-32 Bottom Bracket Tool for 20 Notch Shimano and ISIS Drive - BO-2 Bottle Opener - CC-4 Chain Checker - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CP-1.2 Cassette Pliers - CT-3.3 Chain Tool - CWP-7 Compact Universal Crank Puller - DCW-1 Double-Ended Cone Wrench: 13/14mm (2) - DCW-2 Double-Ended Cone Wrench: 15/16mm (2) - DCW-3 Double-Ended Cone Wrench: 17/18mm - DSD-2 Derailleur Screwdriver: Cross Tip - DSD-4 Derailleur Screwdriver: Flat Blade - DT-2 Rotor Truing Fork - FR-5.2H Cassette Lockring Tool with Handle - GSC-1 GearClean Brush - HCW-15 36mm/32mm Headset Wrench - HMR-8 Shop Hammer - HT-8 8mm Hex Tool - HXS-1.2 Hex Wrench Set - LP-7 Utility Pliers - MLP-1.2 Master Link Pliers - MW-8 Metric Wrench: 8mm - MW-9 Metric Wrench: 9mm - MW-10 Metric Wrench: 10mm - PAW-12 12" Adjustable Wrench - PW-4 Professional Pedal Wrench - RR-12 Tape Measure - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - SZR-1 Shop Scissors - TL-6.2 Steel Core Tire Levers - TWS-1 Torx Compatible Wrench Set

For weekend adventures and hardworking weekdays, the Overhaul HD adjustable truck rack offers best-in-class payload and unmatched versatility. Leveraging our new HD Bars for a 500-lb. on-road carrying capacity, and paired with Yakima’s 300-lb. Off-Road Rating, the OverHaul HD truck rack is the ideal foundation for heavy loads. The crossbar height can be adjusted to suit your needs: way up, for long loads to go over the cab—or down low, to get the rack out of the wind. The uprights are easy to take on and off in minutes, so the truck’s only racked-up when needed. The OverHaul HD truck rack uses any of our HD Crossbar sizes (HD Crossbars sold separately), and accepts our SideBars for attaching off-road and utility accessories. Multiple tie-down points and the ability to fit most truck beds—including select tonneau covers—make this an ultra-functional rack that works and plays as hard as you do. PRODUCT DETAILS - Adjustable height from 19–30" to create custom set-ups for maximum utility and versatility - Maximum on-road rating of 500 lbs. - Maximum off-road rating of 300 lbs. - Easy on-off placement in minutes with our patent-pending QuickChange rack attachment - Designed and tested for all common truck beds using our BedGrip clamp design, - Additional required kits needed for tracked beds (Track Kit 1) and select tonneau covers (Tonneau Kit 1) - Built to last with engineered aluminum construction and a durable powder-coat finish - Compatible with all Yakima mounts to carry kayaks, surfboards, bikes, rooftop tents, lumber and more - Integrated tie-down points help easily secure any load - T-slot attachments make adding gear mounts and accessories fast—and simple - Integrated SKS (Same Key System) locks to secure your rack system to the truck bed - Works seamlessly with the new Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Built-in bottle opener—cheers! - Suggested accessories: SideBar, Load Stop, Eye Bolt, Ladder Roller, Wear Strips, HD Hook Strap, Rotopax Mounting Kit, Recovery Track Mount PRODUCT SPECS - Weight: 50.54 lbs - Dimensions: L 16.75in x W 5.50in x H 23.50in - Limited Lifetime Warranty

With years of experience and feedback, Kuat overhauled every feature and streamlined the look while maintaining the spirit of its predecessor. A re-designed pivot system with foot assist will endure a lifetime of abuse. Adjustable cradles allow for fast bike fit adjustments. Individual bike cable locks are longer, more durable, and easier to use. Holds bikes with up to 4.8-inch tires ensure a true fit for any bike in your stable. Updated ratchet arm creates an intuitive release and a more stable tow. The ground-up re-design of the Trail Doc work stand delivers a pro level feel. These are only the highlights, resulting from 3 years of extensive development, making the NV 2.0 the most advanced hitch rack on the planet. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks - Trail Doc included - Front tire ratchet design with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium gloss metallic powder with water transferred logos - Hitch lock included - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch, and tires as large as 4.8-inch with use of the Phat Bike Kit - Fits 20-inch to 29-inch tires - Wheel adapter needed for 20-24-inch tires - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV 2.0 Add-On

Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 Facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.

Built to handle heavy loads on backcountry terrain, the OutPost HD truck rack is ready for rugged overland adventures. The mid-height design provides a low center of gravity, easy accessibility to gear, and the perfect platform for the SkyRise Rooftop Tent. Leveraging our new HD Bars for a 500-lb. on-road carrying capacity, and paired with Yakima’s 300-lb. Off-Road Rating, the OutPost HD truck rack is a firmly engineered foundation for a fully loaded overland rack system. Pair the OutPost HD truck rack with the HD Bar length that best fits your bed and gear (HD Crossbars sold separately). Add our SideBar, mounts and accessories, then you’re set to explore the backcountry with confidence. Product Details: - Comes with four towers - Requires Yakima HD Bar crossbar in 60"/68"/78" lengths (Sold Separately) - Fixed mid-height position of 13" provides easy gear access and a low center of gravity - Maximum on-road rating of 500 lbs. - Maximum off-road rating of 300 lbs. - Easy on-off placement in minutes with our patent-pending QuickChange rack attachment - Designed and tested for all common truck beds using our BedGrip clamp design - Additional required kits needed for tracked beds (Track Kit 1) and select tonneau covers (Tonneau Kit 1) - Built to last, with engineered aluminum construction and durable powder-coat finish - Compatible with all Yakima mounts to carry kayaks, surfboards, bikes, rooftop tents and more - Integrated tie-down points make securing any load easy - T-slot attachments make adding gear mounts and accessories fast and simple - Integrated SKS (Same Key System) locks your rack system to the truck bed - Suggested accessories: SideBar, Rotopax Mounting Kit, Recovery Track Mount, Eye Bolts, SkyRise Tent Product Specs: - Weight: 38.50 lbs - Dimensions: L 16.75in x W 5.50in x H 16.50in - Some assembly required, 60 minute install

Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. Includes: • 30.1 mm reamer (part #751.2) and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1 as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC30. Accessories will allow service in other standards.

Say goodbye to awkward loading options, and hello to your e-bike’s new best friend. The OnRamp blends simple, efficient design with secure performance, to create a no-compromise rack to ease the challenge of carrying heavier bikes. An integrated ramp lets you roll your ride right into place, adjustable trays reduce bike-to-bike interference, and conforming frame clamps means it can carry a wide range of bike styles—from e-bikes to town bikes to mountain bikes and fendered-up road bikes—with ease. With a capacity of up to two 66-pound bikes, you can leave your battery on the bike and hit the road. Product Details - Engineered to carry 2 bikes up to 66-lbs each - Integrated ramp for easy, roll-on loading, and stows away neatly - Adjustable frame attachments mean you can carry E-Bikes, mountain, road, hybrid, women’s specific, BMX, kids bikes, and bikes with fenders with ease. - Accommodates tires up to 3.25” wide and up to 27.5 x 4.5” wide tires with the FatStrap Kit (sold separately) - Accommodates bike wheelbases up to 50” - Integrated SKS (Same Key System) locks included to secure bikes to rack and rack to vehicle receiver - Tilts forward with bikes loaded for trunk access - Adjustable bike trays minimize bike-to bike-interference - Off-Road Rated at 40lbs per bike - RV Rated at 40lbs per bike Product Specs - Weight: 40.80 lbs. - Dimensions: L 34.00 in x W 52.00 in x H 45.00 in - Limited Lifetime Warranty

To ensure proper headset performance and longevity, special attention must be given to accurately machine the fork’s crown race seat. Park Tool's Crown Race Cutting Tool is a professional-quality machining tool for milling both the outer edge and lower surfaces of the crown race seat. • Includes high speed steel cutters and adjustable collets to machine 26.5mm and 27.1mm crown race seats on 1” forks and 30.1mm crown race seats on 1-1/8" forks • Unique adjusting system allows a tight fit of the tool on any fork, threaded or unthreaded (even forks with externally butted steerer tubes), ensuring a smooth, accurate cut and proper alignment of the fork in the frame • Cutter sized for 1-inch standard is part #845 (sold separately) • Cutter for 1-1/8 inch standard is #846 (sold separately)

Park Tool's Event Stand is a versatile, stable, multi-purpose storage rack built to hold up to twelve bikes by the nose of the saddle. Perfect for events, races, or sidewalk storage, the ES-1 disassembles and folds easily for compact storage. It includes two height-adjustable tripod uprights, two 47" (119cm) support tubes, and one connector sleeve. The ES-1 is approximately eight feet long but can be extended in length with the use of ES-2 Event Stand Add on Kits (sold separately). - The ES-1 adjusts from 94 to 120cm (37"-47") - Horizontal width (inside to inside): 2.23 meters (87")

Drawing inspiration from Pedro's Bench In a Box and Master Tool Kit, this extensive tool set includes 55 professional-quality tools packaged simply to ensure the best possible value. You won’t find a glorified fishing tackle box, but instead a wide variety of professional tools ready to tackle installations, overhauls, and repairs. The perfect kit for new shop mechanics or home enthusiasts. Includes: - L Hex Wrench Set - 9 piece - 6mm and 8mm Hex Driver - Y Wrenches - 2, 2.5, 3, 4, 5, 6 hex, T10, T25, T30 torx - L Torx Set - 7 piece - Tire Levers – Yellow (2) - Pro Chain Tool 2.0 - Equalizer Pedal Wrench - Vise Whip - Cassette Lockring Socket - Campy BB & Cassette Socket - Splined Bottom Bracket Socket - Freewheel Socket - Bottom Bracket Wrench - Cable Cutter - Cable Puller - Universal Crank Remover w/ Handle - Phillips #2 Screwdriver - Flat Blade 5.5 Screwdriver - Star Nut Setter - 1" & 1 1/8" - Magnetic Parts Tray - 13mm, 14mm, 15mm, 16mm Cone Wrench (2 Pieces Each) - 17mm, 18mm, 19mm Cone Wrench - Tape Measure - Pro Spoke Wrench - Black - Pro Spoke Wrench - Green - Pro Spoke Wrench - Red - Chain Checker Plus - Adjustable Wrench-10

Tough, light, and loaded with features, that's Park's Team Issue Repair Stand. The 3-point leg system and adjustable height (up to 60 inches) creates a stable, ergonomic repair station for easy, efficient wrenching. And, Park's Professional Micro Adjust Clamp quickly clamps nearly any frame tube from 7/8 to 3 inches in diameter, including aero tubes. And the clamping force is fully adjustable for safety. Plus, the clamp has soft, durable rubber jaws that are narrow to fit on even short seatposts and tight areas on a bike. And, the clamp rotates 360 degrees for easy access to any part of the bike. Also, if you're in a hurry, there's a seat cradle for simply hanging your bike too. This great stand folds fast and small for easy transport and storage.

The SHX-1 Slide Hammer Extractor is a professional solution specifically designed for removing press fit cartridge bearings from bicycle components. Utilizing expanding collets, an extendable shaft, and a substantial (960g) slide hammer, the SHX-1 securely yet forcefully drives out cartridge bearings with targeted impact. The SHX-1 is compatible with cartridge bearings with inner diameters from 6 to 32 millimeters, covering most press fit applications found on bicycles including hubs, suspension linkages, and bottom brackets. - Set of 5 expanding collets covers most bicycle bearing IDs from 6mm to 32mm - Slide hammer shaft is extendable from 6.5" (165mm) to 13" (233mm) for additional force when needed - Organized in a convenient storage case

Two plus two equals more: More bikes, more adventure, and more fun. Adding on the StageTwo +2 lets you double your capacity to four bikes, each carried securely and in style. The stadium seating architecture increases ground clearance on rutted trails or steep driveways and its offset tray design further minimizes bike to bike interference and maximizes functionality. The forward-facing remote tilt lever means fast access to the trunk area and integrated locking cables combine with your own lock to provide serious security. - Attaches to the 2” StageTwo to carry two additional bikes?Tiered and adjustable bike trays minimize bike to bike interference and maximize ground clearance - StrongArm™ hook secures bike at wheels, protecting painted surfaces and carbon frames - Convenient remote tilt lever for easy rear of car access - Offset Trays for extra bike to bike clearance - Fits most bikes, including fat-tire, mountain, road, hybrid, women’s specific, BMX, kids’ bikes, & E-bikes up to 60 lbs. each - Fits 16” to 29” wheel sizes and tires up to 3.25” wide and up to 5" wide with the StageTwo Fat Bike Kit (Sold Separately) - Accommodates bike wheelbases up to 52” - Integrated SKS (Same Key System) locks included for added bike security - Add your own bike lock to the integrated lock loop for greater bike security - Compatible only with 2" version of StageTwo - Available in two colorways, Anthracite and Vapor

- SnugTite Stinger positions the rack securely into the hitch receiver - The HitchSwitch lever allows you to tilt the rack down for rear vehicle access or tilt it up when not in use - Ratcheting arm and wheel tray secure bikes quickly without frame contact - Easily adjustable trays move side to side to create generous spacing between the bikes - Tool-free AutoAttach system makes it easy to install and remove the bike rack - Fits carbon frames, mountain bike, downhill bikes, 20—29" wheels, and up to 3" tires without adapters. Fat bike adapter kit sold seperately - Includes the Thule One Key System to lock the rack to the vehicle - Maximum bike weight is 50 lbs / 23kg per bike

The PRS-26 incorporates proven features from our other Team Issue stands to produce a strong, lightweight repair stand that's at home on-the-go or in the race pits. The sturdy tripod leg design folds and unfolds quickly and easily, and provides stability on any surface. The clamp is height-adjustable from 97 to 147 cm (38" to 58"), and can be positioned over one leg or between two legs to accommodate any bike. Precisely constructed from anodized 6063 T6 lightweight aluminum and durable composites, the PRS-26 is our lightest full-featured repair stand, and folds compactly for storage or transport. The PRS-26 is equipped with the time-tested 100-25D Micro-Adjust Clamp, the same design featured on our shop repair stands. The 100-25D features narrow clamping jaws to fit into tight areas or on short seat posts, and clamps nearly any tube from 23 to 76 mm (7/8" to 3"), including aero tubes and dropper posts. The cam-actuated adjustment system allows for quick entry, adjustment and exit. - Maximum weight capacity*: 36 kg (80 lbs.) - Clamp capacity: round and aero tubes from 22 to 76 mm (7/8" to 3") wide - Jaw width: 70 mm (2.75") - Height adjustable from 97 to 147 cm (38" to 58") - Base when open forms a triangle of 126 x 126 x 126 cm (49.6" x 49.6" x 49.6") - Weight: 5.7 kg (12.6 lbs.) - The PRS-26 uses the 100-25D Micro-Adjust Clamp - Replaceable jaw covers (part #1960) *NOTE: The maximum weight capacity of the PRS-26 assumes the bike's center of gravity is positioned directly below the clamp.

- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts - Maximum load capacity is 30kg - Weight of the stand without tool tray is 5.7kg - The stand features a new array of precision aluminum and steel parts which offer stiffness and durability - NEW Jaw mount and rotation system - Stand is adjustable by height between 980 and 1500mm

Park's Deluxe Home Mechanic Repair Stand is an awesome portable stand that's as useful while traveling as it is at home. This versatile stand features Park's shop-quality Micro-Adjust Clamp that handles round and aero seatposts and frames from 7/8-inch to 3-inches in diameter and clamps securely with its quick-release cam and handle that fine-tunes the tension. The clamp also has protective rubber jaws and built-in slots for cables. Plus its jaws are only 2.7 inches tall so they easily fit in narrow areas, like on seatposts that aren't raised much. The Deluxe Stand also boasts a stable base and the top telescopes for putting the bicycle right where you need it to get your work done efficiently. Plus, you can also rotate bicycles 360 degrees and the stand folds for easy carrying and storage.

We put together this set of carefully chosen tools to do basic maintenance and cleaning as well as perform a wide variety of repairs and adjustments on just about any bicycle. A perfect way to start or add to your collection of shop-quality bicycle tools. The AK-5 includes a tough toolbox to protect your investment. Kit Includes: - AWS-1 3-Way Hex Wrench - BBB-4 Big Blue Book of Bicycle Repair - CC-4 Chain Checker - CM-5.3 Cyclone Chain Scrubber - CN-10 Professional Cable and Housing Cutter - CNW-2 Chainring Nut Wrench - CT-3.3 Chain Tool - DCW-1 Double-Ended Cone Wrench: 13/14mm - DCW-2 Double-Ended Cone Wrench: 15/16mm - DCW-3 Double-Ended Cone Wrench: 17/18mm - DH-1 Dummy Hub - DT-2 Rotor Truing Fork - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HXS-1.2 Professional L-Shaped Hex Wrench Set - MLP-1.2 Master Link Pliers - PAW-12 12" Adjustable Wrench - RR-12 Tape Measure - SD-2 #2 Phillips Screwdriver - SD-3 3mm Flat Blade Screwdriver - SW-0 Precision Spoke Wrench: .127" - SW-2 Precision Spoke Wrench: .136" - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench - VC-1 Valve Core Tool

- The bike repair stand is the basic working tool both for service workshops and cycling enthusiasts - Maximum load capacity is 30kg - Weight of the stand without tool tray is 5.7kg

- The HBP-1 is designed to quickly and accurately press bearings into a wide variety of cartridge bearing-type bicycle hubs. - Quick release design for fast tool installation and removal - Includes two bearing presses and precision machined aluminum pilots, bushings, and spacers - Works with more than 20 different cartridge bearing sizes and multiple axle configurations

Walk into the service area of any bike shop in the world, and odds are good you'll see a Park Tool Professional Wheel Truing Stand on the bench still the top choice of professional mechanics everywhere for over 40 years, and for good reason. With extra-tall uprights and wide calipers, the TS-2.3 is capable of accepting most wheels commonly found on road, mountain, BMX, and hybrid bicycles, including wheels with disc brakes, aero rims, and oversized MTB tires. Upright adjustment is controlled with an ergonomically-designed speed knob, which quickly adjusts the stand to accommodate any hub width in seconds. The sturdy uprights of the TS-2.3 feature integrated storage for the included thru-axle adapters, which allow for compatibility with thru-axle, quick release, and solid axle hubs without the use of additional parts or adapters. The TS-2.3 is constructed from durable powder-coated heavy-gauge steel and is manufactured, assembled, and calibrated in St. Paul, Minnesota. Strong, comfortable knobs and spring-loaded calipers and caliper arm ensure smooth, consistent operation, and the removable composite caliper tips protect painted rims and fragile materials. 100% adjustable and rebuildable for a lifetime of use. Wheel Capacity: - Maximum wheel size: Up to 29" + with or without tire - Maximum hub width: 200 mm (7.87") - Maximum rim width: 102 mm (4") - Hub compatibility: Accommodates quick release and solid axle hubs, also accommodates thru axle hubs using included TS-2TA.2 Thru Axle Adaptors Mounting Options: - Bolt to benchtop — mounting holes are 9.5 mm (3/8") in diameter and 200 mm (7.9") from center to center - Clamp in vise — base is 76 mm (3") deep - Install in TSB-2.2 Truing Stand Base

Say goodbye to awkward loading options, and hello to your e-bike’s new best friend. The OnRamp blends simple, efficient design with secure performance, to create a no-compromise rack to ease the challenge of carrying heavier bikes. An integrated ramp lets you roll your ride right into place, adjustable trays reduces bike to bike interference, and conforming frame clamps means it can carry a wide range of bike styles—from e-bikes to town bikes to mountain bikes and fendered-up road bikes—with ease. With a capacity of up to two 66-pound bikes, you can leave your battery on the bike and hit the road. Product Details - Engineered to carry 2 bikes up to 66-lbs each - Integrated ramp for easy, roll-on loading, and stows away neatly - Adjustable frame attachments means you can carry E-Bikes, mountain, road, hybrid, women’s specific, BMX, kids bikes and bikes with fenders with ease. - Accommodates tires up to 3.25” wide and up to 27.5x 4.5” wide tires with the FatStrap Kit (sold separately) - Accommodates bike wheelbases up to 50” - Integrated SKS (Same Key System) locks included to secure bikes to rack and rack to vehicle receiver - Tilts forward with bikes loaded for trunk access - Adjustable bike trays minimize bike-to-bike interference - Off-Road Rated at 40lbs per bike - RV Rated at 40lbs per bike Product Specs - Weight: 42.60 lbs. - Dimensions: L 34.00 in x W 52.00 in x H 45.00 in - Limited Lifetime Warranty

Park Tool's Event Stand Add On Kit extends the length of the ES-1 Event Stand (sold separately) by eight feet. It includes one height-adjustable tripod upright, two 47” (119cm) support tubes, and one connector sleeve.

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

Park Tool's Right Hand Bottom Bracket Tap is a replacement tap for their BTS-1 Bottom Bracket Tap Set (sold separately). This tap is used on the non-drive or left side of the bike, which uses a clockwise or "right hand threading." Two taps are required for use.

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

A Bike Roller Bag That You Can Count On For Easy Packing And Full, Padded Coverage Take the stress out of traveling with your bike. The Dakine Bike Roller Bag is tricked-out to make packing easy and to keep your bike safe during transit. It delivers 360° coverage for mountain, road, downhill, and fat bikes. First, the anchoring system and bag frame structure are interconnected to maintain structural integrity and bike safety. Second, bike-specific pads and EVA padding protect critical areas including discs, drivetrain, and dropouts. The kit includes wheel and fork bags as well as a roll-up tool bag to keep essential assembly tools and small parts organized. Third, bomber wheels and multiple grab handles make for smooth transitions, and the bag's collapsible design lets you roll it up for compact storage. - Fits one downhill, trail, fat, 29'er, or road bike - Smooth-rolling, replaceable urethane wheels - 360° Padded bike protection with five internal padded sleeves - Rolls up for compact storage (55"x 14.5 x 18) (140cm x 37 x 46) - Five upper grab handles - Lockable YKK #10 main zipper - Removable Tool Roll for tools and pedals - 600D Recycled Polyester - Dimensions: 55 x 13 x 34" [ 140 x 33 x 86cm ] - Weight: 17.75lbs [ 8kg ]

The 16-piece set from the screwdriving tool specialist Wera solves the most important screwdriving problems associated with bicycles—reliable control of applied torque to protect sensitive components—with a click-torque wrench in the unmistakable Wera design. It features a very robust design with high accuracy, along with easy setting and saving of the default values. The audible and tactile snapping on reaching the scale values facilitates the safe setting of the desired torque values, while the robust release mechanism guarantees a clearly audible and tactile trigger signal when the set torque is reached - 16-piece wrench set for bicycle applications with torque control including Wera Clique-Torque wrench A 5 (2.5-25 Nm) - Sockets and bit sockets for the most popular screw profiles on road bikes, mountain bikes, and e-bikes - Easy setting and saving of the desired torque value with an audible and tactile click when the scale value is reached (click 1) - Safely quantified force: when the set value is reached, the torque wrench triggers audibly and noticeably (click 2) - Precise to +/- 4%

Pedro's Tool Station includes 13 professional-quality Pedro's tools covering a wide array of common repairs and adjustments. Designed for public use, all tools are permanently tethered to the steel back panel with extra-long stainless steel cables. The tools are stored in our Burrito Tool Wrap with a protective weather-resistant flap. Three spare cables and crimp sets are included and can be used to add extra tools, a floor pump, or to facilitate replacement of tools if necessary. The Tool Station also features 4 mounting holes which are keyhole shaped to allow easy removal and re-installation if desired. Additionally, the central mounting holes are spaced to fit standard steel sign posts if a free-standing setup is preferred. - 6-Pack Chain Tool - Chain Tool and three-way spoke wrench (includes 2 Spare Pin/Screws) - Folding Hex Wrench Set - 1.5-6mm sizes - Pro T/L Hex Wrench - 8mm - Y Wrench-T10,T25,T30 sizes - Tire Levers - Yellow Pair - Pro Pedal Wrench - #2 Phillips Screwdriver - 5.5mm Flat Blade Screwdriver - Toothbrush - Drivetrain brush Chain Checker Plus - Chain wear check tool, chain hook tool, and chainring nut wrench - Adjustable Wrench-10" - Trixie - 8, 9, 10, 15mm Box, Bottle, Cog Lockring

Where bike mechanics go, Topeak's PrepBox Toolkit follows! This all-in-one bicycle repair kit holds 18 chrome-vanadium and hardened-steel bike tools, each with its own cutout, so you can always be sure you've got the right tool for the job. This tough case has a sturdy carrying handle and secure latches to keep it closed in transit. If you need room for more tools or small parts, simply attach the included zip bag, add the other items, and you're good to go. This is the perfect kit for home and event bike maintenance and repairs.

Bring your dog along on a safe and comfortable ride! This is a premium dog bike trailer for small, medium or large dogs up to 100 lb (45 kg). Stroller conversion kit included. Key features: • Easy to attach to bikes/ebikes • Folds down in seconds • Suspension on wheels • Solid base floor

Park Tool's Fork Threading Set is designed for cutting new threads and for chasing existing threads on fork columns that are not chromed. The FTS-1's expandable cutting dies are made from the highest quality high-speed steel for precision cutting and long life. The unique thread guide system used with the FTS-1 is specially designed to allow the metal chips and shavings that result during use to fall completely through the guide, preventing damage to the fork threads and the tool. The FTS-1 includes: • Die handles • 1" x 24 tpi cutting die (Part #606) • 1" cutting guide (Part #610) Accessory dies and guides are also available separately: • 1-1/8" x 26 die (Part #607) • 1-1/8" guide (Part #611) • 1-1/4" x 26 die (Part #608) • 1-1/4" guide (Part #612) Die handles fit all three sizes of dies and guides.

Park's Bench-Mount Repair Stand easily bolts to any workbench and includes Park's shop-quality solid cast-aluminum Adjustable-Linkage Clamp that boasts durable, protective and replaceable vinyl jaw covers. The clamp holds seatposts and frames from an inch to 1 5/8 inches in diameter and there are slots for cables, too. Plus, this stand rotates 360 degrees for optimum bike positioning.

Two years in the making, this chain tool is built to stand the test of time. The threaded body and lead screw are made from cro-moly and receive a low friction powder vapor deposition (PVD) coating to give it a silky feel you've never felt in a chain tool before. Large handles ensure ease of use with any chain. The freely rotating pin is made from a shock rated tool steel and will likely last as long as the rest of the tool. The chain tool comes with a spare chain pin in the handle and they are cross-compatible with Shimano and Campagnolo pins. The greatest part of the chain tool has to be the interchangeable mid plate. The saddled part that holds the chain in position can be swapped to work with nearly anything the industry comes out with. This ensures that your investment won't become obsolete when company "X" comes out with an 18-speed cassette in 20 years. The tool also peens Campagnolo 11 and 12 speed chains to factory specs using a backstop that threads into the backside of the tool as a stop. Compatible with 9-12 speed chain, including the new 12-speed chains from Campagnolo and Shimano's XTR 9100.

Don't monkey around. Wrench with precision! Topeak's PrepStand Pro boasts an integrated digital scale so you can weigh your bike after an upgrade, or the components you plan to install. Of course, you'll love working on the PrepStand Pro, too. Its heavy-duty aluminum base is extra stable for heavy work; its clamp safely and securely grips all seatposts; it also rotates 360 degrees for placing bikes just where you want them. Plus, it only weighs 13.7 pounds and folds into the included nylon carrying bag for easy transport.

"A full-featured bicycle workstand designed and built for the home mechanic. The PCS-10.3 includes Park Tool's tried and true cam-actuated micro-adjustable clamp design for quick one-handed entry and exit, as well as a quick-release height adjustment lever for easy, secure adjustment. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with tubular support braces, a locking support yoke, and upgraded internals for extra dependability. The PCS-10.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes. The PCS-10.3 features an integrated height-adjustable parts tray, as well as accessory ports for the Park Tool #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately), so your tools and small parts are always within reach. Quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-10.3 is the perfect way to upgrade your home shop—a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. NOTE: The maximum weight capacity of the PCS-10.3 assumes the weight is centered below the clamp and between the legs.? - Cam-actuated micro-adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Rubber saddle pad allows bikes to be hung by the saddle for quick adjustment or storage - Durable, textured powder coat finish - Integrated height-adjustable parts tray - Height adjustment collar features accessory ports for compatibility with the #106 Work Tray or PTH-1 Paper Towel Holder (both sold separately) - Maximum weight capacity*: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) using convenient quick-release lever - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 45"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg)"

Many athletes are fortunate enough to be able to ride nearly anything. For those that are sensitive to bike fit though, replicating fit to a new bike or confirming fit after travel can be a challenge involving lots of trial and error. This set of tools allows accurate and repeatable measurements for saddle height, angle and setback. The accuracy and repeatable measurements also serve as a base to make adjustments to fit. -The magnetic saddle height bullets ensure you get an accurate center at the BB by locating in the crank arm fixing bolt or the crank arm preload cap of Shimano caps. This allows you to focus on the smart end of the tape measure at the saddle plate. -Two reference marks on the saddle plate means you can pull a measurement to the exact same spot relative to the nose of the saddle every time. This gives you accuracy down to a single millimeter. -The front of the saddle plate is engraved with a ruler, to allow you to calculate saddle setback at the saddle. This allows you to drop the plumb bob off the side of the bike and clear all of the bottle cages. -The wide plate has ample room to mount a level, protractor or smart phone for adjusting the angle of the saddle. This is particularly helpful for non traditional saddles like SMP and Adamo.

A compact and lightweight foldable workstand with unique 4-way adjustment and solid base for home shop, race day or events. - Holder: Accepts bikes with quick-release fork or 12 x 100mm, 15 x 100 / 110mm, 20 x 110mm thru-axle forks - Holder Height: 85cm - 145cm / 33" - 57" - Folding: Three QR clamps - Base: HD folding 6061-T6 tubes - Material: 6061-T6 tubes / aluminum - Max Load: 18kg / 39.7lb - Weight: 4.9kg / 10.8lb - Height adjustable - 90 degree up/down angle adjustable - Fore and aft adjustable, 360 degree rotatable - Optional Tool Tray - Optional carry bag Size - 86 x 25 x 16cm / 33.9" x 9.8" x 6.3" (Folded) - 120cm / 47.2" (Base Diameter)

More than 25 years since its debut in 1986, the Folder One is the original that continues to set the bar for the hitch bike category. Featuring the patented Adams hitch that is often imitated but never duplicated, the Folder One offers unmatched safety and durability for years of enjoyment. Backed by a lifetime warranty, the Folder One is the best way to introduce 4-6 year-olds to the joys of cycling. - Steel frame, designed for children aged 4-6 - Simple single-speed is easy to pedal and ride - Patented, folding frame for easy storage and transport - Compatible with most 26" and 700c lead bicycles - Low center of gravity offers increased stability to parents and children - Best-in-class steel hitch + 4 adapters will fit almost any seatpost - Full chainguard and bashguard for enhanced durability - Includes safety flag for maximum visibility on the road

Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2

A perfect way to start a bicycle tool collection! A great combination of tools to help a home mechanic clean, adjust, maintain, and do some basic repairs on their bike. The SK-4 includes more than 15 genuine Park Tool products that can perform dozens of tasks and includes a custom Park Tool toolbox with extra room for spare parts and more tools. The SK-4 includes: - AWS-10 Fold-Up Hex Wrench Set - BBB-4 Big Blue Book of Bicycle Repair - CC-3.2 Chain Checker - CN-10 Professional Cable and Housing Cutter - CT-5 Mini ChainBrute Chain Tool - FR-5.2 Cassette Lockring Tool - GSC-1 GearClean Brush - HCW-16.3 Chain Whip/Pedal Wrench - HR-8 8mm Hex Wrench - MLP-1.2 Master Link Pliers - SD-2 Shop Screwdriver: #2 Phillips - SW-7.2 Triple Spoke Wrench - TL-1.2 Tire Lever Set - TWS-3 Torx Compatible 3-Way Wrench

- The Pro Seat is the ultimate child seat for MTB families. It's lightning fast to attach and remove, is fully adjustable, and has zero frame contact. - Designed for children 2 – 5 years (up to 60lb / 27kg) - Super fast to fit, remove and swap between bikes - Fully adjustable with zero frame contact - Adjustable to fit electric and regular mountain bikes - Fits all bikes with standard 1-1/8 steerers (10mm clearance required)

"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"

Smart and functional child bike seat designed for everyday rides. Features - Easy mounting of the child bike seat on the frame of your bike - Your child sits comfortably in the soft and shock-absorbing seat - Maximum child comfort and a safe, custom fit thanks to the adjustable padded 5-point harness - Your child is quickly and easily secured with the childproof safety buckle - Added visibility thanks to built-in reflector and safety light attachment point - Ensures a perfect fit as your child grows thanks to adjustable foot rests and foot strap - Easy to clean and to keep dry due to the seat's water-repellent materials - Designed and tested for children from 9 months* to 6 years old, up to 48.5 lbs/22 kg *Consult a pediatrician for children under 1 year old. Technical specifications - Weight capacity: 48.5 lb - Weight: 10 lb - Safety harness: 5-point - Meets safety standards

The classic child bike seat. Classic, safe and easy-to-use reclining child bike seat, taking your daily commutes and family bike adventures to the next level. With Thule RideAlong child bike seat, it’s easier than ever to bring the kids along for a bike ride. The seat’s quick-release bracket makes it super-easy and quick to install. The bracket is mounted with bolts from the front, where there’s free space to use a tool. Once the bracket is mounted, the seat clicks into position and is ready for use in seconds. The child bike seat also has a reclining function for extra comfort and on-the-go naps. Features: - Seat can be mounted/dismounted from bike in seconds with the universal quick-release bracket, fitting most bike frames (28-40mm diameter round frames and maximum 40 x 55 mm oval frames) - Integrated protection wings safeguard your child's hands when the bike is leaned against a wall - Your child rides safely with the adjustable 3-point harness - Smooth, comfortable ride for your child due to the DualBeam suspension system that absorbs road shock - Your child is quickly and easily secured with a childproof safety buckle with large buttons - Added visibility thanks to built-in reflector and safety light attachment point - Ensures a perfect fit as your child grows thanks to the single-hand adjustable footrests and foot straps - Detachable, water-repellent padding is machine washable and reversible, offering two color options. - Comfortable for on-the-go naps with five different reclining options (up to 20°), easily adjusted using only one hand

Rear-mounted child bike seat provides comfort and style for everyday rides. - Soft and shock-absorbing foam seat that lets your child travel in comfort - Adjustable footrests and foot straps ensure a perfect fit as your child grows - Available in frame, rack, and front versions - Universal rack mount system for quick and easy mounting of the child bike seat on your bike - Built-in reflector and safety light attachment point for increased visibility - Childproof safety buckle secures your child quickly and easily - Adjustable padded 5-point safety harness for a safe, custom fit and maximum child comfort - Water-repellent materials make the seat easy to clean and keep dry - High-quality metal lock that secures the child bike seat to your bike included - Designed and tested for children from 9 months* to 6 years old, up to 48.5 lbs/22 kg.* Consult a pediatrician for children under 1 year old.

Smart and functional child bike seat designed for everyday rides. Features - Quick and easy mounting of the child bike seat on your bike. Fits rear bike racks with an EasyFit window or racks equipped with Thule Yepp Maxi EasyFit Adapter (sold separately) - Your child sits comfortably in the soft and shock-absorbing seat - Maximum child comfort and a safe, custom fit thanks to the adjustable padded 5-point harness - Your child is quickly and easily secured with the childproof safety buckle - Added visibility thanks to built-in reflector and safety light attachment point - Ensures a perfect fit as your child grows thanks to adjustable foot rests and foot strap - Easy to clean and to keep dry due to the seat's water-repellent materials - Designed and tested for children from 9 months* to 6 years old, up to 48.5 lbs/22 kg. *Consult a pediatrician for children under 1 year old. Technical specifications - Weight capacity: 48.5 lb - Weight: 8.4 lb - Safety harness: 5-point - Meets safety standards

Smart and functional child bike seat with a personality, designed for everyday rides. Dedicated click-in mounting system for MIK HD bike racks. - Dedicated click-in mounting system for MIK HD bike racks - Soft and shock-absorbing foam seat that lets your child travel in comfort - Adjustable footrests and foot straps ensure a perfect fit as your child grows - Built-in reflector and safety light attachment point for increased visibility - Childproof safety buckle secures your child quickly and easily - Adjustable padded 5-point safety harness for a safe, custom fit and maximum child comfort - Water-repellent materials make the seat easy to clean and keep dry - Designed and tested for children from 9 months* to 6 years old, up to 48.5 lbs/22 kg.* Consult a pediatrician for children under 1 year old.

After years of research and testing, Park Tool's built what they consider the best shop clamp made. It’s smooth, versatile and built to stand up to everyday shop use. • #100-3D fits the following repair stands: PRS-2, PRS-2 OS, PRS-2 OS-1, PRS-2 OS-2, PRS-3, PRS-3 OS, PRS-3 OS-1, PRS-3 OS-2, PRS-3.2-1, PRS-3.2-2, PRS-4, PRS-4 OS, PRS-4 OS-1, PRS-4OS-2, PRS-4W and PRS-33 • #100-5D fits PCS-4, PRS-7, some models of PRS-5 (with composite top tubes), and PCS-1 models manufacturer post 2002. (Note: Inspect top tube below lever for an embossed "939") • #100-25D fits PRS-25, PCS-10, PCS-11, PCS-12 (and PRS-15 with 1951-15 Adaptor Stud) • Grips nearly any tube from 7/8” to 3” (23–76mm), including aero tubes • Micro-adjustability allows perfect clamping pressure every time and prevents damage to thin-walled tubes • Long travel cam handle allows quick entry, adjustment and exit • Versatile: It grips nearly any tube including aero shaped tubing and seat posts 7/8” to 3” (23mm-76mm). Its narrow clamping jaws (2.7”/7cm) are designed to clamp securely yet fit into tight areas or on short seat posts. • Durable, replaceable jaw covers • Soft Touch saddle cradle provides a perfect spot to temporarily rest a bike by its saddle • Built to last: Powder coated, precision machined, die-cast aluminum main body parts and high quality small parts • Fast operation: Cam-actuated adjustment system for quick entry, adjustment and exit, plus handy “spinner” handle helps speed large size range adjustments

EVOC BLACKLINE backpacks represent the perfect blend of innovative ventilation and the successful technology standard of their PROTECTOR BACKPACKS. The EVOC FR TRAIL BLACKLINE is a high-end day pack with a back protector that offers optimal support during longer bike tours and trail rides. - Integrated back protector: backpack also serves as personal safety equipment (PSE) - Body-hugging fit - Completely ventilated carrying system with breathable hip belt - Back protector is removable and replaceable - 2-Step-Zip System - Attachment system for: helmet (XC, full face), protection gear (stowable) - Tool compartment (separate, wide swing-open) - Rain cover (integrated) - Accommodates hydration systems up to 3L (not included)

- The 2.0 Seat improves on the original Shotgun Seat with the addition of a quick release mount, 2 adjustable leg lengths, and more rubber protection. - Designed for children 2 – 5 years (up to 48lb / 22kg) - Quick release for super fast install, removal and swap between bikes - Adjustable width and angle to fit all mountain bikes (not including e-bikes) - Shotgun 2.0 Bars are 250mm in length, with Pro 19mm rubber grips designed for little hands - Bars come with inserts to fit 25.4mm, 31.8mm and 35mm handlebar diameters - Fits all bikes with standard 1-1/8 steerers (10mm clearance required)

1/4" Ratcheting Reversible Click-Type Micrometer Torque Wrench with Bit Set and Custom Tool Roll Pedro's Demi Torque Wrench II is designed for left-hand or right-hand thread 3-15Nm torque settings required for critical components such as handlebars, stems, and controls. The new design features an integrated bit holder for storage of 8 bits on the wrench for convenience and versatility and the small overall size and low-profile head are perfect for tight spaces and easy handling. The Demi Torque Wrench II is quickly set using a micrometer-style dial and a simple locking mechanism. Accurate to within +/- 4 percent. Backed by Pedro's two-year warranty. - Integrated bit holder for storage of 8 bits on the wrench - Square 1/4" reversible ratcheting drive designed for left-hand or right-hand thread 3-15Nm torque settings - Small overall size and low-profile head perfect for tight spaces and easy handling. - Includes custom tool roll for wrench and bit storage. Included bits and adapters: - Hex: 2.5, 3, 4, 5, 6, (25mm), 4 & 5mm (50mm) - Torx: T10, T15, T20, T25, & T30 (25mm), T25 (50mm) - Crowfoot: 7 & 8mm Flare - WrenchDrive Adapter: 1/4" square to 1/4" hex

Precision-machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing. Kit includes 3 pairs of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm For use with: - Suspension damper shafts - Suspension damper cylinders - Suspension air-spring cylinders - Suspension piston shafts - Thru-axles Clamp 10-006 fits - 8mm - 9mm - 10mm - 12.7 - 15mm - 15.9mm - 16.7mm Clamp 10-007 fits - 17.5mm - 18.7mm - 19.5mm - 21mm - 22.2mm Clamp 10-008 fits - 23.8mm - 25.4mm - 28.6mm

Rear mounted child bike seat providing comfort and style for everyday rides. - Soft and shock-absorbing foam seat that lets your child travel in comfort - Adjustable footrests and footstraps ensure a perfect fit as your child grows - Available in frame, rack, and front versions - The seat can be mounted and dismounted from the bike in seconds with the universal quick-release bracket, making it easy to switch between different bikes - Smooth, comfortable ride for your child due to the DualBeam suspension system that absorbs road shock - Built-in reflector and safety light attachment point for increased visibility - Childproof safety buckle secures your child quickly and easily - Adjustable padded 5-point safety harness for a safe, custom fit and maximum child comfort - Water-repellent materials make the seat easy to clean and to keep dry - High quality metal lock that secures the child bike seat to your bike included

Lightweight and stylish for premium comfort. The child bike seat for maximum child comfort, with custom fit and convenient magnetic buckle Thule Yepp Nexxt Maxi is a lightweight and safe rear frame-mounted child bike seat with a contemporary design, providing premium comfort for your child. It makes mounting easier than ever, thanks to the innovative mounting possibilities that make it possible for the seat to be mounted on most bikes without a bike rack. The magnetic safety buckle quickly and easily secures your child to the seat. Features: - Lightweight yet sturdy seat combining a hard outer shell with soft padding for premium child comfort - Available in frame rack and front versions|Universal rack mount system for quick and easy mounting of the child bike seat on your bike - Adjustable footrests and foot straps ensure a perfect fit as your child grows - Soft and shock-absorbing seat that lets your child travel in comfort - Adjustable padded 5-point safety harness for a safe custom fit and maximum child comfort - Added visibility thanks to built-in reflector - Water-repellent materials make the seat easy to clean and keep dry