Filter By:

  • Show More Brands

  • Show Fewer Brands

Parts & Accessories

RockShox Reverb Adjustable Seatpost
$512.99
On leg-burning climbs, crazy fast descents and rolling technical terrain, RockShox's Reverb dropper post enables you to attack the trails like never before. Just hit the hydraulic remote lever for 100–125mm of infinitely adjustable up-and-down saddle movement without ever slowing down! The return speed is easily adjustable by turning a dial on the remote while the triple-lipped sealing system and sealed hydraulic hose keep dirt out for clean, consistent operation. There's also an included collar that limits travel to a preferred height setting. So go ahead and drop your seat a couple of inches for that 30-foot technical section, raise it for that long climb then lower it all the way and get back for that steep descent, without losing your flow.
3T Zero25 Team Stealth
$199.99
Zero25 is a lightweight, universal seatpost with a twist: it’s two seatposts in one. The two clever, reversible saddle rail clamps transform the post from zero saddle setback to 25mm setback. All that’s needed is to flip the clamps from one side of the seatpost head to the other and the offset changes. No more problems with getting the wrong seatpost or needing another one when you change the type of saddle you use – it now takes 30 seconds to transform your seatpost. And the best news is that despite the double functionality, the Zero25 is even lighter than our previous seatpost. Zero25 can handle any type of seatpost rails, from round to all oval shaped carbon rails.
3T Stylus 25 Pro
$144.99
3T's Stylus is a fresh take on the 2-bolt aluminum seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. The Stylus 25 places the seat clamp assembly with 25mm of setback for a rearward position on the bike.
e*thirteen by The Hive TRS+ Dropper Seatpost
$349.99
The TRS+ from e*thirteen is a fully mechanical dropper post focused on reliability, simplicity, and durability. This is a coil spring post with pre-set mechanical stops along it's travel range. No bleeding, no loss of air pressure or depleted nitrogen charge. And, your saddle position is rock solid, locked into place with a heat-treated cam instead of a hydraulic mechanism. The internally routed cable is controlled by a left, shifter-style lever that is best suited to 1x drivetrains. - 4 pre-set travel positions - Shifter-style remote is SRAM MatchMaker compatible, fully weather sealed, and uses a cartridge bearing at the lever pivot - Shop-serviceable with common tools: No oil or air pressure needed - Cable head is at the bottom of the post, clamped at the remote for easier removal during maintenance or shipping - Double bolt clamp: fits both standard and 7 x 9mm carbon rails - 5-Year warranty
Bontrager Line Dropper Post
$324.99
A streamlined design with fewer moving parts and better seals makes for a dropper post that performs consistently and requires less maintenance. The updated Bontrager Line Dropper Post is easy to set up and now even easier to service. The cable-actuated hydraulic locking design provides proven functionality for bikes with internal routing. - Remote cable actuation with ergonomically designed under-bar lever - Air-sprung hydraulic locking cartridge offers infinite adjustability within dropping range - Keyed chassis prevents rotation for a stable ride - 2-bolt rocker head with micro adjustment allows for easy saddle tilt adjustment - Internal cable routing keeps housing tucked away and free from moving wheel - Includes cable, housing, and 1x under-bar remote lever - On-Bar Drop Line Universal Lever sold separately - Frame must be compatible with internally routed seatpost routing
Bontrager Line Elite Dropper Seatpost
$449.99
A refined dropper that combines great lever feel with smooth, consistent operation for an awesome riding experience. Smooth operator Smooth operation, long-term durability, and a refined design come together for a best-in-class riding experience. The Line Elite Dropper's proven design is easy to set up and now even easier to drop, with 20% less saddle force required. Avid Matchmaker and Shimano I-Spec II compatibility ensure simple, integrated setup and length options from 100mm to 170mm travel ensure there is a size for your ride. Product details - Cable actuated under-bar lever compatible with MatchMaker and Shimano I-Spec B-Type - Infinitely adjustable air-sprung hydraulic locking cartridge with 20 percent reduction in compression force - Pierced head design allows riders to run longer travel post with shorter overall lengths - 2-bolt rocker head with micro adjustment allows for easy saddle tilt adjustment - Internal cable routing keeps housing tucked away and free from a moving wheel - Includes cable, housing, and 1x under-bar remote lever - On-Bar Universal Lever sold separately - The frame must be compatible with internally routed seatpost routing
Profile Design Fast Forward Alloy
$189.99
Gold standard aluminum seatpost for converting road bike frame geometry into a more aggressive aero position. Specifications - Launches Road Frame Geometry into the Aero Position Aluminum seat post effectively changes a 73° seat tube angle frame to 78° and moves riding position forward up to 38mm. Perfect solution for adjusting road bike geometry into a more aggressive aero position. - Easily Fine-Tune Saddle Comfort: Micro-tilt adjust to fine-tune saddle comfort. - Weight: 300g - Diameter: 27.2mm / 31.6mm with included shim - Length: 265mm - Minimum Insertion Length: 90mm - Offset: 38mm (Forward) - Head: 2-bolt, non-reversible - Material: 6061-T6 aluminum topped with forged 6061-T6 upper and lower clamps
TruVativ Descendant Seatpost
$79.99
The 3D forged and highly adjustable Descendant seatpost is built to do its job so that you can do yours. Set it, forget it, and go harder. - Easy-to-adjust dual bolt head design - Forged and butted 7050 shaft - Forged seat clamps - Max Height: 250mm - Min Height: 40mm - Clamp Style: Standard Rails - Material: Aluminum
Profile Design Fast Forward Carbon Seatpost
$269.99
Profile's Fast Forward Carbon Seatpost effectively changes a 73-degree seat tube angle to 78 degrees and moves your saddle forward up to 38mm. Made with multi-layer, multi-directional carbon weave, the Fast Forward is super light, too. Plus, its double-bolt micro-adjustable clamp is easy to use and super secure.
Paul Component Engineering Tall And Handsome Seatpost
$359.99
- Nice looking seatpost is built to the highest standards for function and ease of use - Head and shaft are made from a special high strength 2024 aluminum alloy - Two bolt head offers roughly 15 degrees of tilt adjustment - 26mm clamp setback. 320g - Made in the USA
Thomson Elite Covert Dropper Seatpost
$644.99
Keep the flow going with Thomson's Elite Covert Dropper Seatpost, a post good enough to wear the Thomson badge. This exquisite bicycle upgrade is made of tough and light 7000 series aluminum and its cable attaches to the very bottom and uses your bike's internal cable routing to keep your frame nice and clean. Of course, the Elite features Thomson's trademark engineering and reliability with custom, best-of-the-best O-rings, bushings, and oil. Thomson's remote handlebar lever is included. It's one of the smallest, most-ergonomic ones available and it has a short throw for quick height changes to move your saddle smoothly through 5 inches of infinite travel (damped in the last 15mm for a forgiving action). Plus, the classic Thomson seat clamp allows quick and easy seat adjustments and keeps your saddle in place.
Race Face Next Seatpost
$179.99
- Highly tested & engineered unidirectional carbon tube offers outstanding fatigue & impact strength for a lightweight XC post - Simple, lightweight 2 bolt design permits the saddle to be installed without disassembling the head - Angled clamp bolts allow easy tool access for hassle free adjustment and tightening - The rubber seatpost grommet fully seals the post to prevent water entering your seat tube - Hunter head is suitable for most rail types 7/8mm alloy rails and 7/9mm carbon - Wide lower cradle gives extra rail support for lightweight saddle rails - Narrow upper cradle increases the amount of forward/back saddle adjustment - Tilt Adjustment 6° up 12° down with Zero offset
Zipp Service Course Seatpost
$79.99
Zipp's Service Course Seatpost is stiff, light, has excellent gripping power, and the low-profile clamp allows you to slide the saddle extra far back on the rails. The shaft and head are 3D forged from a single piece of light, tough 7075 aluminum, and the clamp even features downward-facing bolts for micro-adjustments to achieve that perfect fit.
Trek Seat Mast Cap
$179.99
Trek-compatible seat mast cap Offered in white and black and a variety of lengths and offsets, the mast cap includes hardware compatible with round saddle rails only. 7x10mm carbon rail-compatible hardware sold separately. Key features: - Ultra-light carbon construction - One bolt head design offers easy fore-aft and infinite angle adjustment - Compatible with all Trek road bikes with round seat masts - 175mm and 135mm lengths - 5mm and 20mm offsets - Aluminum clamp
Eclypse S7 Seatpost
$59.99
- 3D Forged AL-6061-T6 One-piece construction - High-grade black steel hardware - 275g
KS LEV-Carbon Seatpost
$919.99
- Carbon body dropper with molded-in cable interface and saddle cradle - Superlight Recourse cable with carbon remote lever and titanium bolts - 65mm drop from a hydraulically locked, air sprung cartridge, for XC/Enduro use - Stationary remote cable routing on side of post - 400mm length
Bontrager Speed Concept Seatpost (Gen. 1)
$249.99
Bontrager's Speed Concept Seatpost lets you get your fit dialed before your next triathlon or time trial. It's crafted from OCLV carbon and the one-bolt head provides simple adjustments. Different offsets allow you to customize your riding position for superior ergonomics and aerodynamics.
Evo Kalloy Seatpost
$29.99
- Alloy seatpost with alloy bracket - Length: 400mm - 20mm offset
Crank Brothers Cobalt 3 Seatpost
$149.99
Crank Brothers is a company that's known for unique, innovative designs, and they've applied their years of component manufacturing expertise to the Cobalt 3 Seatpost. Its 7075-aluminum shaft is light and stiff, and the CNC'd single-bolt head allows for quick, precise seat angle and setback adjustments. Plus, measurement dots are etched into the post to make dialing in the perfect seat height a snap.
3T Stylus 25 Team
$189.99
3T's ultra-light carbon Stylus is a fresh take on the 2-bolt seatpost. The transition from the pillar to the saddle clamp assembly is a finned, rearward swoosh suggestive in shape of the classic one-bolt posts of yore. But the clamp bolts are deployed to either side of the saddle-support cradle, conferring greater stability and easier adjustment. The Stylus 25 places the seat clamp assembly with 25mm of setback for a rearward position on the bike.
Crank Brothers Cobalt 1 Setback Seatpost
$54.99
Crank Brothers is a company that's known for unique, innovative designs, and they've applied their years of component manufacturing expertise to the Cobalt 1 Seatpost. Its aluminum shaft is light and stiff, and the single-bolt head allows for quick, precise seat angle and setback adjustments.
Profile Design Canta Seatpost
$289.99
Profile's Canta Seatpost is made of high-modulus carbon for lightness, exceptional vibration damping, and a beautiful appearance. It boasts a super-secure 2-bolt forged-aluminum seat clamp that lets you easily dial in the seat angle to perfection.
Bontrager Race XXX Lite Full Aero TTX Seatpost
$249.99
Designed exclusively for Trek's Equinox TTX bikes, this extremely aerodynamic seatpost uses proprietary OCLV carbon technology to keep weight low and strength high. The one-bolt seatpost head provides adjustment along three axes: fore and aft, side to side, and up and down. Symmetric design allows you to run either a 20mm rearward or 20mm forward offset, effectively changing your seat tube angle from a traditional 73 degrees to an aggressive 79 degrees. - Construction: OCLV carbon fiber shaft - One bolt head mechanism offers easy fore-aft and infinite angle adjustment - Reversible design allows setback or forward saddle positions - For use with Trek TTX frames
Previous page Page 2 of 2