Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories

$14.99
Visor for Impala helmet
COMPATIBILITY
- Impala MIPS
- Impala
- ATTACHMENT: Direct Mount
- WEIGHT: 45g
- MATERIAL: Nylon

$34.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.

$54.99
Magnetic mount lens for Lazer Bullet 2.0 helmet.
The integrated lens is an integral part of the Bullet 2.0 helmet. It can be stored on the helmet surface using the magnetic docking when not in use.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: magnetic
- WEIGHT: 24g
- MATERIAL: Polycarbonate

$34.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: G1 MIPS, G1
- ATTACHMENT: G1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$17.49
- Replacement X-Static pads for Lazer's Wasp Air Helmet
- X-Static pads are an anti-microbial, self-cleaning pad system

$19.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
This optional taillight can be added to certain models of Lazer helmets and provides additional visibility on the helmet. It fits inside dock within the Century MIPS or Century helmet, or mounts to the Mudcap when used with the Z1 MIPS, Z1, Blade+ MIPS or Blade+ helmets. Note, the Z1 LED Mudcap (PLZ2005660134) or Blade Mudcap (PLZ2167882106) must be used with the corresponding helmet in order to mount this light. No Mudcap is required with the Century series helmets.
COMPATIBILITY
- Century MIPS
- Century
- Z1 MIPS
- Z1
- Blade+ MIPS
- Blade+
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 1.5 hours
- RUN TIME: 27 hours
- LUMENS: 4 lumens
- ATTACHMENT: Century helmet
- WEIGHT: 11g
- MATERIAL: LED light

$19.99
Change ventilation options with a twist!
Choose between aerodynamic performance or up to 11% more ventilation with a rotation of the Twistcap.
COMPATIBILITY
- Century MIPS
- Century
- ATTACHMENT: magnetic
- WEIGHT: 28g
- MATERIAL: Nylon

$29.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
Sizing:
- Small = 52 – 56cm
- Medium = 55 – 59cm
- Large = 58 – 61cm

$9.99
Freshen up the interior of your helmet with a new pad set!
- Replacement pads for Jackal helmets

$29.99 - $34.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Z1 MIPS, Z1
- ATTACHMENT: Z1 helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Bullet and Bullet MIPS helmets. Set includes six pads - Two front pads, two top center pads, two top side pads.
- COMPATIBILITY: Bullet, Bullet 2.0
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Jackal MIPS helmets. Set includes one pad - Front/Top unipad only.
- COMPATIBILITY: Jackal MIPS, Jackal
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$4.99
Strap divider for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- WEIGHT: 3g
- MATERIAL: Nylon

$15.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
LED light for Lazer TSPLUS retention system
COMPATIBILITY
- Tonic MIPS
- Tonic
- Tardiz2
- Coyote MIPS
- Coyote
- Chiru MIPS
- Next+
- Compact DLX MIPS
- Compact DLX
- Compact
- BATTERY TYPE: CR2032 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: TS+ mechanism
- WEIGHT: 12g
- MATERIAL: LED light

$39.99
A helmet mounted taillight is an ideal way to help make sure you are seen in low light conditions
The Lazer Universal LED mounts directly to any Lazer KinetiCore helmet. It can mount to any other helmet by using the included Velcro strap.
COMPATIBILITY
- Cityzen KinetiCore
- Jackal KinetiCore
- Nutz KinetiCore
- Pnut KinetiCore
- Strada KinetiCore
- Vento KinetiCore
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 2.5 hours
- RUN TIME: 54 hours
- LUMENS: 40 lumens
- ATTACHMENT: Direct mount to Lazer KinetiCore helmets. Velcro mount to any helmet.
- WEIGHT: 15g

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer G1 and G1 MIPS helmets. This is the standard padset. Set includes four pads - front pad, two top side pads and one top center pad.
- COMPATIBILITY: G1 MIPS, G1
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam

$29.99
Keep the rain, snow and mud from getting inside your helmet, or use as a quick aerodynamic solution to close off the front and side vents. Aeroshell is a great accessory for compatible Lazer helmets!
The Aeroshell is a plastic cover, designed to fit perfectly over specific models of Lazer helmets. The Aeroshell snaps into place and protects the riders head from wind and rain while still allowing for some air movement under the front of the helmet and out the rear vents. The Aeroshell is unique in that it is easily removed from the helmet when riding conditions are such that additional ventilation is desired. Snap it on when the rain is pouring down and pull it off when the sun starts to shine, the Aeroshell is the perfect tool for every possible condition. Additionally, the Aeroshell provides a significant increase in Aerodynamic performance once it is installed on the helmet. By closing off the ventilation holes, the amount of aerodynamic drag the helmet creates is strongly reduced, making your road helmet into an aero helmet and resulting in a faster ride.
- COMPATIBILITY: Blade+ MIPS, Blade+, Blade, Blade MIPS
- ATTACHMENT: Blade or Blade+ helmet
- WEIGHT: 45g
- MATERIAL: Polycarbonate

$24.99
Venturi technology accelerates the airflow through the helmet.
By creating an active air draw at the rear of the helmet, the Venturi cap increases airflow through the Lazer Bullet 2.0.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: Bullet 2.0 helmet
- WEIGHT: 21g
- MATERIAL: Polycarbonate

$6.99
Screws for Impala visor.
- COMPATIBILITY: Impala MIPS, Impala
- WEIGHT: 1g
- MATERIAL: Aluminum

$44.99
Magnetic mount lens for Lazer Urbanize helmet
The integrated lens is an integral part of the Urbanize helmet. It can be stored on the helmet surface using the magnetic docking when not in use.
COMPATIBILITY
- Urbanize NTA MIPS
- ATTACHMENT: magnetic
- WEIGHT: 54g
- MATERIAL: Polycarbonate

$29.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
- COMPATIBILITY: Gekko MIPS, Gekko, Lil'Gekko MIPS, Lil'Gekko
- BATTERY TYPE: USB rechargeable
- RECHARGE TIME: 2 hours
- RUN TIME: 24 hours
- LUMENS: 5.2 lumens
- ATTACHMENT: Rear vent
- WEIGHT: 19g
- MATERIAL: LED light

$9.99
Freshen up the interior of your helmet with a new pad set!
- Replacement pads for Sphere helmets
- Attachment: Velcro
- Material: Foam

$49.99
Strap dividers for thick Lazer helmet straps
COMPATIBILITY
- Blade+ MIPS
- Blade+
- Tonic MIPS
- Tonic
- Coyote MIPS
- Coyote
- Chiru
- Next+
- Cameleon MIPS
- Compact DLX MIPS
- Compact DLX
- Compact
- J1
- Gekko MIPS
- Gekko
- Lil'Gekko MIPS
- Lil'Gekko
- ATTACHMENT: strap
- MATERIAL: Nylon

$24.99
A user adjutable cap for the Bullet 2.0 in order to provide airflow or maximize aerodynamics.
- COMPATIBILITY: Bullet 2.0
- ATTACHMENT: Bullet 2.0 helmet
- WEIGHT: 34g
- MATERIAL: Polycarbonate

$19.99
Camera mount for Jackal and Impala helmets.
- COMPATIBILITY: Jackal MIPS, Jackal, Impala MIPS, Impala
- ATTACHMENT: Velcro
- WEIGHT: 13g
- MATERIAL: Nylon

$4.99
Strap divider for thin Lazer helmet straps
COMPATIBILITY
- Bullet 2.0
- G1 MIPS
- G1
- Z1 MIPS
- Z1
- Century MIPS
- Century
- Victor
- Wasp Air Tri
- Impala
- ATTACHMENT: strap
- WEIGHT: 3g
- MATERIAL: Nylon

$24.99
Upgrade your Urbanize helmet and keep the cold on the outside with the Winter Pad Kit!
Designed especially for the Urbanize helmet, the Winter Pad Kit will help keep you on the bike during those cold commutes. The kit includes fleece-lined pads, which attach to the helmet straps and help keep your ears insulated from the cold and wind. The kit also includes a plug for the front vent to reduce cold airflow into the helmet. If you ride in the fall, winter or spring the Winter Pad Kit is a "must have" accessory for your Urbanize helmet!

$15.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
The ATS LED Taillight only fits Lazer helmets equipped with the Advanced Turnfit System.
- COMPATIBILITY: Bullet 2.0, Century MIPS, Century, Wasp Air Tri, Victor, Impala MIPS, Impala, Urbanize MIPS
- BATTERY TYPE: LR41 button battery
- RUN TIME: 37 hours
- LUMENS: 4 lumens
- ATTACHMENT: ATS dial
- WEIGHT: 15g
- MATERIAL: Nylon

$29.99
A helmet-mounted taillight is an ideal way to help make sure you are seen in low light conditions.
- COMPATIBILITY: Cameleon MIPS
- RECHARGE TIME: 2 hours
- RUN TIME: 24 hours
- LUMENS: 5.2 lumens
- ATTACHMENT: Rear vent
- WEIGHT: 19g
- MATERIAL: LED light

$9.99
Freshen up the interior of your helmet with a new pad set! Padset details listed below.
Replacement padset for Lazer Cameleon MIPS helmet. Set includes four pads - front pad, two top side pads and top center pad.
- COMPATIBILITY: Cameleon MIPS
- ATTACHMENT: velcro
- WEIGHT: 12g
- MATERIAL: Foam
Page 1 of 2
Next page