Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Racks & Baskets

Searching for a bike rack or basket but unsure where to look? Browse our selection of bike racks and baskets for sale at Sweet Petes Bike Shop.

$9.99
Genuine replacement parts for your Interchange bag system. - The perfect accessory for when you have multiple bikes or just need a replacement. - Interchange bracket for Quick Cleat - Rugged and lightweight plastic construction - Easy on, easy off storage
$14.99
Bontrager's Cargo Net keeps your gear lashed to your bike rack perfectly. The stretch webbing attaches with four hooks.
$79.99
Lightship baskets are made from finely woven rattan cane, the outer skin of the natural rattan vine. These baskets are replicas of the Nantucket Lightship baskets first produced in Nantucket during the whaling era of the 1800s. Attaches to front handlebars with two leather straps. - Dimensions: 14" (L) x 10" (W) x 8.5" (H) - Maximum Weight Limit: 13 pounds
$64.99
- Quick Release mounting bracket - Foam coated carry handles make this a comfortable shopping basket - Powder-coated steel construction - Easy and simple installation - Foam coated mounting hooks reduce scratching - Mesh bottom makes this suitable for small items - 25 x 35 x 22cm (W x H x D) - Fits 22.2/25.4/31.8mm Handlebars
$39.95
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Long, four-slotted mount allows two, smaller bottles to be mounted in-line - Compatible with triple bottle mounts on forks or frames, use included neoprene pad and zip tie for use with standard bottle cage mounts
$39.95
B-RAD Bottle Mounts allow for cargo customization and cargo optimization. They are designed to work in tandem with B-RAD Base mounts to keep cargo on the bike and off the back. - Compatible with any bike frame that has 2 standard 64mm spacing bottle cage mounts (most modern frames) - 6061-T6 aluminum brackets, stainless hardware - Weight (no hardware) – 20g - Maximum load 1700g - Designed to carry two bottles or accessories off of one B-RAD base
$99.99
- Weatherproof resin wicker and powder-coated steel frame construction - Quick Release mounting bracket with foam-coated handlebar hooks that reduce scratching - Fits 22.2/25.4/31.8mm handlebars - Comfortable foam coated carry handles - Easy installation - Mesh bottom to retain small items - Dimensions: 28 x 38 x 24cm (L x W x D) - Load Capacity: 7 kg / 15lbs
$199.99
Built specifically to work with fat tire bikes, and designed to fit on the front or rear of your bike, this might be our most versatile rack. Fits fat and most tire sizes Our patent-pending adjustable width design will work with most fat bike frame, hub and tire widths, without having to twist or bend anything. Front or rear compatible Can't decide if you want to install on the front of the rear of your bike? Don't worry about it, this product does both easily. Disc brake compatible Sometimes these new fangled disc brakes get in the way of accessory installation. This product was designed to make sure that isn't an issue. Height and width adjustable Our patent-pending adjustable width design will work with most road and mountain bike hub and tire widths, without having to twist or bend anything. This rack will happily accommodate most road and mountain bike wheel sizes. This includes the diameters 26", 650b, 700c, 27.5" and 29" and widths from 23c up to 3". Aluminum construction Constructed of T6061 aluminum, this product is both lightweight and strong. Lifetime warranty
$39.99
B-RAD, which stands for Bottle Relocation and Accessory Device, is a system for organizing on-bike accessory storage using bottle cage mounts. Used alone to shift bottle cage location for clearance, or combine with other B-RAD accessories to carry tools, tubes pumps or a 2nd bottle on downtubes. - Single bottle mount with two slotted holes for adjustments up to 4mm +/- 10mm - Designed to maximize bottle capacity on small frame bikes and dual suspension frames
$87.99
Wald's medium size twin rear carrier basket is a durable way to carry heavier loads. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry 1-2 small grocery bags in each side basket with greater confidence and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - Dimensions: 6.5 x 13.5 x 10 inches; tapers to 4.5 x 11.5 inches at the bottom - Rack is 5" by 13" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 520 has a Zinc Plated Finish; 520GB has a Black Powder Coat Finish - Complete basket with fittings weighs 5.3 lbs.
$89.99
Topeak's MTX BeamRack is an awesome way to add touring capacity to bikes that won't accept conventional racks, such as dual-suspension mountain bikes. The quick-release mount clamps firmly to your seatpost and this rugged rack boasts durable aluminum construction capable of supporting up to 20-pounds with ease.
$54.99
- Fits lengthwise on the luggage carrier of your bike. - Easily attached with supplied mounting hardware. - Ideal for carrying shopping, daily essentials or school supplies. - Weatherproof with a reinforced frame. - Classic black color.
$19.99
Electra's Seatpost Clamp w/Rack Mounts is the crucial link between your bike and your rear rack. It replaces the standard seatpost clamp to allow rack installation on bikes not originally fitted with rack eyelets.
$74.99
Axiom's Journey DLX Lowrider Front Rack is super light and super durable. This is perfect when you're way out in the middle of nowhere or just running errands, when every gram counts and gear failure is not an option. This rack is more than just strong, cornering clearance is exceptional due to the increased height, and it's still able to handle large, heavy panniers (sold separately). Additional looped struts keep the panniers steady and there are even safety tabs to prevent your bag hooks from accidentally sliding off.
$57.99 - $59.99
The Wald 582 sets the standard for ingenuity when it comes to rear baskets. Mounting to the side of many rear racks, this nimble basket is the perfect size for packing 1-2 bags of groceries while balancing your load. When not in use, the base of the basket pivots up allowing the side walls to collapse. A simple clamp at the top keeps the basket out of your way when not in use. - Made in U.S.A. (Maysville, KY) - Baskets clamp to most rear racks up to 1/2" diameter - When not in use the base of the basket pivots up allowing the side walls to collapse making the collapsed basket 1" thick - A simple clamp at the top keeps the basket out of your way when collapsed - Extended basket is 12 3/4" front to back x 7 1/4" side to side x 8 1/2" deep - 582 Baskets have a Zinc Plated Finish; 582BL and 582WH Baskets have a Powder Coat Finish - Complete basket weighs 2.8 lbs.
$109.99
Wald's big boy rear twin carrier offers tremendous amounts of cargo capacity. The 535 Twin Rear Carrier Basket lets you haul a reusable grocery bag in each basket with room to spare. With mounting points at both the seat stays and near the rear axle, you can haul more groceries, gear, or anything else you need to with less impact on your bicycle's handling. By placing the bulk of your load around the rear wheel, you increase your bicycle's stability. This allows you to carry your groceries, gear, computer, or backpack with greater comfort and ease. - Made in U.S.A. (Maysville, KY) - These are 1-piece twin carrier baskets designed to fit on rear of the bicycle - 7.5 x 18 x 11 inches; taper to 5 x 16 inches at the bottom - Rack is 5" x 16" long - Baskets can be mounted to frame eyelets or use the supplied mounting bracket - Legs have two axle mounting holes and one small hole to mount to the eyelet - 535 has a Zinc Plated Finish; 535GB has a Black Powder Coat Finish - Complete basket with fittings weighs 7.2 lbs.
$124.99
Adds functionality. Adds style. - Compatible with 27.5" and 29" wheel Powerfly - Does not include mounting hardware - Confirm compatibility before use
$59.99
Rack 'em up Turn your bike into a trusty pack mule with this sturdy rear rack. The BackRack Disc is designed to mount to the eyelets already built into your frame, so installation is easy. It has MIK compatibility so you can securely mount compatible trunk bags or accessories in seconds, plus integrated threaded accessory eyelets for added functionality and effortless light installation. Product details - Quick and easy install adds storage and utility to compatible bikes - MIK mounting system provides secure, integrated mounting with compatible bags - Integrated eyelets make it easy to mount lights or other accessories - Compatible with MIK, standard trunk bags or panniers - Single-bolt strut mounts allow maximum adjustment and easy installation - Includes required mounting hardware and spacer to fit most disc brake calipers - Max weight capacity 25kg (55 lbs.) Specifications - Size: Small 13-18" (33-52cm); Large 18-22" (54-62cm) - Rack type: Rear racks - Material: Aluminum
$94.99
Axiom's Journey Adjustable 2429 Rack is made of light, rugged aluminum with vertically adjustable stays meaning it mounts on a wide range of rear wheel sizes. It handles even large, heavy panniers (sold separately) with additional looped struts that keep your panniers steady. There also is a platform on top, which adds strength and doubles as a mini fender.
$79.99
Axiom's Market Basket is just the thing for running errands by bike. It boasts a tough steel frame and vinyl-coated steel mesh. It installs on almost any rack (sold separately) that has 7mm- to 10mm-diameter rails. You also get a place to easily attach a taillight (sold separately).
$144.99
Genuine replacement parts. A MIK-compatible rack that is easy to mount. Adds functionality. Adds style. Details: - Original equipment replacement rack for the Townie Go! 5i - MIK mounting system provides security and integration - Mounting hardware not included
$79.99 - $129.99
Keep your bike operating as it should. Original replacement rack for Electra Townie Go! 7D. Details: - Color matched for direct compatibility - Mounting hardware not included
$153.00
Fit Kit SET706.R contains all the parts to mount an Old Man Mountain rack to the rigid fork of a road or gravel bike with a 12 mm thru axle. This kit includes: - 12 x 125mm thru axle with 1.0 mm thread pitch, with spacer for 119mm spacing - A pair of mounting pucks, for bikes without upper eyelets. - Ultra strong and UV stable Panduit Zip Ties - Clear protective tape, for underneath the pucks and Zip Ties - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. - Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$92.99
Whether you're heading to the beach, riding to the grocery store, or just cruisin' around, Nantucket's Cisco Handlebar Basket will get you and all your goodies there in style. This beautiful rattan basket boasts high-quality wicker construction and a rolled rim for extra durability, and it attaches to most bicycle handlebars with its easy-to-use straps and buckles. - Dimensions: 14" (L) x 11" (W) x 9.5" (H) - Maximum Weight Limit: 13 pounds
$175.99
Wald bicycle racks offer a simple rear rack design for easy use. Lightweight, yet sturdy construction with simple mounting points located at eyelets near the rear axle and the brake mount. The 215 works perfectly with Wald's innovative 582 rear folding basket. - Simple design for easy use - Lightweight, yet sturdy - Steel rack w/adjustable brake bolt mount - Loading surface = 13" x 5" - Lightweight at just over 2 pounds
$34.99
The Wald 585 rear basket sits atop your bicycle's rear rack. Perfect for hauling full-sized grocery bags, small laptop bags, spare clothes, or maybe even storing your helmet while parked. - 14 x 9 x 9 inches - Fits on rear rack of bicycles - Sturdy steel construction - Made in the USA
$17.99
Adapter for mounting the Topeak MTX rear basket to any MTX QuickTrack compatible rack.
$44.99
Axiom's Transit Rack is your trusty friend when it comes to hauling gear. It's tough, it's light and it can hold panniers. Use it to commute, tour or just head to class. It handles heavy loads easily and acts a fender as well.
$74.99
Blackburn's EX-1 rack does everything. Built for maximum durability of 9mm aircraft-grade 6061-T6 aluminum, this rack features a 3-strut design to control the load and is compatible with Copilot child seats (sold separately). It fits most bikes.
$24.99
Axiom's Rain Cover Trunk keeps your trunk bag dry when the weather turns foul. It's waterproof thanks to the seam-sealed, PVC-coated Nylon Oxford fabric, and the bright yellow color helps keep you seen in low light conditions. It even stores away compactly when you're not using it.
Page 1 of 5 Next page