Parts & Accessories

The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.

The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.

The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface. - Compatibility: KEO Grip/KEO Cleat - Use: Protect the cleat

The MADE by LOOK KEO standard is recognized in the cycling world for its minimal weight and compact design of the cleat and pedal combo. Of course, compatible with all pedals on the market, their memory positioner is a major advantage when changing your cleats. Their principle and use are the same as the DELTA cleat standard; engagement and disengagement remain efficient and reassuring. - Use: Road - Material: Polyamide + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 68g

X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK cleats provide a 13° angle of disengagement and allow for unidirectional release only. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Lateral - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g

X-TRACK cleats are compatible with all SPD-standard pedals, utilizing 2-screw mounting for an ultra compact profile and lightweight. X-TRACK Easy cleats provide a 13° angle of disengagement and allow for multidirectional release. - Compatibility: X-Track and Geo Trekking Collection, SPD compatible - Material: Premium Steel - Clip out direction: Multidirectional - Clip in: 30% easier - Angle of Disengagement: 13° - Lateral Adjustment: 2mm - Angular Adjustment: 1° - Weight (pair): 45g

The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats. - Use: Road & Indoor Bike - Material: Polyacetal + PTFE - Lateral adjustment: 4mm - Longitudinal adjustment: 12mm - Weight (pair + fasteners): 75g

Look's Keo Grip Cleats feature special anti-slip surfaces on the bottom that improve traction while walking. They are also made of polyamide nylon for easy entry/exit, efficient pedaling and durability. And, there are wear indicators that tell you when it's time for new cleats. These cleats are available with three different amounts of lateral float: 4.5-degree (gray), 9-degrees (red), and fixed float (black).

The KEO GRIP cleats closely resemble the KEO CLEAT model, yet they boast the added feature of a TPU layer on the shoe side which prevents the risk of cleats sliding on carbon soles. Their anti-slip surface on the pedal side offers extra safety and stability when walking. - Use: Road - Material: Polyamide + TPU - Lateral adjustment: 4mm - Longitudinal adjustment: 9mm - Weight (pair + fasteners): 68g

Look's S-Track Sauser Cage increase the surface area of Look's S-Track pedals, making them perfect for enduro and all-mountain riders, off-road touring fans, or anyone who rides clipped in but appreciates the stability of a platform. They give you a wide, anti-slip platform to keep your feet on the pedals even when you're not clipped in. - Adaptable to all of the S-Track range (sold separately) - 25g

The Vision Light Kit is the solution to take your Geo Trekking or Geo Trekking Roc Pedals into the night. Ride with increased safety and visibility in traffic when the sun goes down thanks to the 3 different flash modes, an autonomy of over 30 hours, and the oscillating light beam created by the constant rotation of the pedals. The convenient clip system makes the kit quick and easy to install. As the Vision Light is independent from the pedal, it can be easily recharged via a simple USB cable.

Look's S-Track Enduro Cage increase the surface area of Look's S-Track pedals, making them perfect for enduro and all-mountain riders, off-road touring fans, or anyone who rides clipped in but appreciates the stability of a platform. Constructed from lightweight aluminum, they give you a wide, anti-slip platform to keep your feet on the pedals even when you're not clipped in. - Adaptable to all of the S-Track range (sold separately) - 60g

Replacement pins for our Daemon pedals: - 5mm long - Made with 316 stainless steel - Precision CNC Machined in Whistler, B.C. - Sold in packs of 10

Our rebuild kit keeps your Daemon pedals running like new. Includes: - Nitrox-coated axles (left and right) with nuts (x2) - Stainless steel, sealed Enduro cartridge bearings (x4) - Igus bushings (x2)

Everything you need to fully rebuild OneUp Composite pedals. MAINTENANCE INSTRUCTIONS 1. remove outer and inner end caps with 6mm hex key. 2. remove axle nut using 9mm socket. Drive side pedal (RH pedal) has left hand (reverse) threaded nut. Non Drive side pedal (LH pedal) has regular right hand threaded nut. 3. pull axle out of pedal body 4. push inner bearing out with 6mm hex 5. to replace bushing use a flat head screw driver to pry against the inner surface of the bushing to pull it out. You will destroy the bushing by removing it. 6. remove axle seal (take note of direction) REPLACEMENT INSTALL 1. grease new bushing and axle. Place bushing on axle and push it into pedal body. 2. replace pedal seal (thicker portion near flange of axle) 3. grease and place new bearing back into pedal body 4. slide axle through pedal body and bearing 5. replace axle nut 6. replace both end caps

Everything you need to fully rebuild your OneUp Composite Pedals. KIT CONTAINS - 2 CARTRIDGE OUTER BEARINGS - 2 INNER DU BEARINGS - 2 OUTER SEALS - 2 AXLE NUTS

HEIGHT ADJUSTMENT WASHERS AND PINS FOR OUR ALUMINUM PEDALS KIT CONTAINS - 40 - HEXIGONAL TIPPED M4 THREADED SOCKET HEAD PINS - 40 - 0.8mm THICK HEIGHT ADJUSTMENT WASHERS

Everything you need to fully rebuild your OneUp Aluminum Pedals. Our V2 kit is compatible with all OneUp Aluminum pedals. The brass bushings take the place of the 3 small cartridge bearings and aluminum washer that were on our original pedal assembly. KIT CONTAINS - 2 LARGE OUTER BEARINGS - 2 BRASS BUSHINGS - 2 OUTER SEALS - 2 FLANGE WASHERS - LH AND RH AXLE BOLTS - 2 AXLE O-RINGS - LH AND RH BEARING NUTS

Everything you need to fully rebuild your OneUp Composite Pedals. KIT CONTAINS: - 2 CARTRIDGE OUTER BEARINGS - 2 INNER DU BEARINGS - 2 OUTER SEALS - 2 AXLE NUTS - 2 INNER CAPS - 2 END CAPS

Crank boots designed for RaceFace Next R cranksets.

For cyclists seeking maximum power transfer but also a minimal amount of float, Shimano’s SM-SH12 Blue cleats are the answer. By placing the pivot point at the front, lateral sliding movement is eliminated. But these cleats still permit a small amount of angle change from the pivot point back towards the heel so that your foot is not completely locked in place. • Blue SPD-SL cleats have 2 degrees of float – 1 degree in each direction • Shimano’s newest cleat option – a middle-ground between yellow (SM-SH11) and blue (SM-SH12) • Allows for a small range of movement while still delivering a high amount of pedaling efficiency • Float’s Pivot point is at the front of the cleat, eliminating lateral sliding movement while allowing a small amount of angle change from the pivot point back towards the heel

Replacement cleats for all Shimano® SPD clipless pedals, featuring an easy-to-unclip multi-directional release. Ideal for casual or fitness riders looking for more clipless pedal confidence, these will allow you to clip out either on the outside or inside of the pedal. Lifting and twisting your heel can also release the pedal. Not recommended for performance off road and pavement riding, choose the SM-SH51 cleat instead.

Shimano's SM-SH56 Multi-Release Cleats disengage with less effort and in more directions than standard SPD cleats. This set includes cleat nuts.

For cyclists seeking maximum power transfer but also a minimal amount of float, Shimano’s SM-SH12 Blue cleats are the answer. By placing the pivot point at the front, lateral sliding movement is eliminated. But these cleats still permit a small amount of angle change from the pivot point back towards the heel so that your foot is not completely locked in place. Features: - Occupying the middle-ground between Shimano’s Yellow and Red cleat options, the SM-SH12 Blue cleats have two degrees of float (one degree in each direction), allowing for a small range of movement while still delivering a high degree of pedaling efficiency. - Customizable: Seamlessly compatible with Shimano SPD-SL pedals, which allow you to adjust the spring force required to clip in and out of your pedals - Ease of Disengagement: Feature a 12-degree clip-out angle, allowing you to quickly get out of your pedals when the time calls Off-Bike Friendly: Cleat size and shape provide a stable walking platform and are less prone to clogging with dirt when off bike - Built to Last: Composite construction combines an injection-molded main body with grip-enhancing TPU tips that are durable and maintain long-lasting pedal engagement

Versatile Road Cleat For All Types of Riders For anyone unsure about which cleats to choose, the SM-SH11 are a great starting point. With their large float range and centered pivot point, Shimano’s Yellow SPD-SL cleats allow the toes to point in a wide range of angles and provide more room for error during set-up while still delivering an efficient connection between rider and bike. So if you're new to cycling, experience knee pain, lack flexibility, or simply don’t know where to begin, these cleats are your best bet. FEATURES: - SM-SH11 Yellow SPD-SL cleats come stock with most Shimano SPD-SL pedals and are a great choice for the majority of cyclists. They feature a six-degree float range (three degrees in each direction), which allows for free movement and low joint stress while still creating a solid connection between rider and bike. - Customizable: Seamlessly compatible with Shimano SPD-SL pedals, which allow you to adjust the spring force required to clip in and out of your pedals - Ease of Disengagement: Feature a 13-degree clip-out angle, allowing you to quickly get out of your pedals when the time calls - Off-Bike Friendly: Cleat size and shape provide stable walking platform and are less prone to clogging with dirt when off bike - Built to Last: Composite construction combines injection molded main body with grip-enhancing TPU tips that are durable and maintain long lasting pedal engagement

Shorter 7mm rear load pins for the outer extremities of SPOON, SPIKE, and OOZY pedals. - Provide durability and improved safety - Mix and match with the longer stock pins to customize your ideal amount of grip

IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer

Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness. - 28pcs rear load pins - 16pcs front load pins - Tool included

Replacement bearings and bushings specific to Spoon 90 (Small) and 100/110 (Medium and Large) pedals. Eliminates play that can develop over time, and revives performance. Includes: - Sealed Bearing x2pcs - 10mm IGUS Bushing x2pcs - Green Friction Seal x2pcs - Locknut - O-ring x 2pcs

- Compatible with all Spike & Oozy Pedals - Full Complement Sealed Bearing x 2pcs - Green Silicone Friction Seals - Replacement inboard bearings for your SPIKE or OOZY pedals.