Profile's T2 Wing has a winged cross-section to slice through the air, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the T2 is super light and boasts a wide clamping section that will accept any Profile clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability.
This is an aerobar defined by fit. Unlike aerobars of the past that had their fit and adjustability range restricted by design and construction, the Aeria Ultimate places fit first. The Aeria Ultimate is a durable, low profile carbon aerobar designed with an expandable adjustability range and custom fit for the ideal TT setup for each individual rider’s body type. It features an extensive range of independent adjustment of reach and width in the smallest increments, stack adjustment with lowest stack available without extensions placed below the basebar, and built-in tilt adjustment of the integrated bracket allowing the armrests to be rotated separately from the extensions without adding stack height. - Reach adjustment range: Increments of 7.5mm with range of 92mm fore/aft - Adjustable stack of 25 to 105mm in 5mm increments to achieve the same pad stack as aerobars with extensions placed below the basebar - All dimensional adjustments are independent of each other to achieve desired fit with no need to calculate adjustments in order to make changes - Tilt adjustment is built into the pad/extension bracket with a range up to 15 degrees - rotating the armrests separate from the extensions improves overall aerodynamics without raising stack height - Includes F-40 Armrest with offset bolt pattern featuring nine times fore/aft positioning with 67.5mm adjustment range, 18,5mm width adjustment between position, and 15 degrees rotational adjustment - Stem sold separately Tech specs: - Bracket: Aeria Ultimate Forged - Stack: 25mm to 105mm (5mm Increments) - Reach: -21mm to 92mm (7.5mm Increments) - Width: 125mm to 252mm (18.5mm Increments) - Extension Length Adjustment: 230mm to 337mm (Center of Basebar to Tip) - Extension Length: 378mm - Extension Height: 71mm - Extension Angle: 30° (For T4+ Carbon) - Bracket Tilt Adjustment: 0-15° - Weight: 910g (without stem or armrest risers)
The WING/10a offers great fit versatility - allowing the rider to fine-tune the grip height for their riding style and comfort preferences. The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. For optimal aero performance, the bar should be set in the low position to increase the separation from the armrests. Aero The Wing/10a employs a truncated airfoil (Kamm Tail) to stay within UCI regulations while offering the performance of a much deeper section. This, along with tidying up the underside of the wing where the cables used to exit has led to a small improvement in performance. For optimal aero performance the bar should be set in the low position to increase the separation from the armrests. Fit Data - The WING/10a is available in the following widths: 36, 38, 40, 42, 44 - The straight hand grips are part of the flippable design that allows the grip height to be modified by 10mm. The grip length can also be trimmed by up to 30mm. - The WING/10a offers the greatest fit versatility of any alloy basebar we’ve previously made, allowing the rider to fine tune for their riding style and comfort preferences. - An additional reason for the truncated design of the wing was to improve hand comfort when sitting up on the bar tops
Profile's Ozero Base Bar boasts superior aerodynamics thanks to its slippery hydroformed shape. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Ozero puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
The Aeria Evo AL is an update of our proven Aeria bar. We have evolved the fit range of the bar with New Evo brackets, Ergo armrest and 35a extensions. The new brackets add the ability to tilt the entire assembly, as well as letting the armrest go much narrower than the first generation design. The new Ergo armrest increase rider comfort with a smoothly curved shape and expand the fit range with an expansive set of adjustment options. Specifications: - Base Bar: Aeria Aluminum UCI Compliant 3:1, aerodynamic 6061-T6 Hydroformed aluminum wing has zero drop from clamp to brake extensions. Combined with a shorter reach, this design translates to better control. - Bracket: Evo The Evo bracket allows you to upgrade an existing Aeria bar with a massively increased fit range as well as builtin tilt. It is compatible with the existing spacer kit and armrests. - Armrest: Ergo Ergo is the core of our new family of fi t and comfort focused armrests. It offers a smoothly curved shape designed to comfortably cup the elbows while providing good support and control. The bolt pattern yields 48 possible configurations just by moving the armrest. The pads are available in two thicknesses - 5mm and 10mm - allowing riders to tune the fit and feel to their own preference. The Ergo is compatible with all current aerobars and earlier models that used the F19, F22, F35 and F40 armrests. - Extension: 35a The new range of extensions has evolved from our well proven T-Series. They have been designed to offer distinct fi t options. We have also adopted a new naming system where by the name gives the angle and material of the extension. Thus the 35a is a 35° bend in aluminum. The 35a extensions offer a 35deg ski bend shape. They are 400mm long to allow a wide range of riders to fit. The cable routing is designed to exit from the rear of the extension. - Basebar Width: 42cm (Center-to-Center) - Basebar: 6061-T6 aluminum - Pursuit Reach: 157.5mm (center to tip) - Bracket: Aeria Evo (6061-T6 aluminum) - Armrest: Ergo - Armrest Stack: 56mm to 80mm (5mm Increments): Risers / Bolts sold separately - Armrest Offset: -66mm to 1.5mm (7.5mm Increments) - Armrest Width: 100mm to 266mm (18.5mm Increments) - Extension Length Adjustment: 40mm - Extension Length: 400mm - Extension Height: 80mm - Extension Angle: 35° - Extension Material: 6061-T6 aluminum, pre-drilled for bar-end shifter cable - Armrest Rotation: 7° - Bracket Tilt Adjustment: 0-10° - Weight: 1012g
The Svet TT was designed for Time Trial and Triathlon usage and features a sleek UCI compliant 3:1 wing. Strategic cable slot positioning enables streamlined internal compatibility for electronic or mechanical shifting cable management while the zero drop and upturn brake extensions provide better positioning for climbing and cornering while in the pursuits. - Weight: 210g (42cm) - Width: 44cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 165mm (center to tip) - Pursuit Drop: 0mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No
The aero wing section on Profile's full carbon Svet R Carbon Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Svet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!
When you're in it to win it, you need Profile Design's Aeria Wing Aero Bars! Designed for maximum aerodynamics, amazing adjustability and superior handling, this beautiful front end sets a new standard. For the ideal blend of power, control and aerodynamics it boasts Profile's high-modulus carbon wing base bar with ergonomic grips, stackable risers for fine-tuning armrest and extension height, their F25 armrests that can be rotated and moved fore/aft, and their T2+ carbon extensions that also are fully adjustable. This all means that you can dial in the ultimate fit to fly down the road and change it as you get stronger, more flexible and even faster! Plus, the carbon construction means lightness and stiffness for excellent support and handling when you're hammering along setting a new PR. And, to make your bike cheat the wind even more you also get multiple drillings for internal cable routing and electronic Di2 compatibility.
The Airwing has a deep drop to keep you in a wind-cheating aero tuck, making this a perfect base bar for triathlons and time trials. Made from double-butted 6061 aluminum, the Airwing is super light and boasts a wide clamping section that will accept any Profile Design clip-on aero bar. Plus, it's shot peened and anodized for added strength and durability and pre-drilled for internal cable routing for aerodynamics and a clean look.
Page 1 of 1