Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

$153.00
Fit Kit SET812 contains all the parts needed to thru-axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru-axle. This kit includes: - 12 x 159—165mm thru axle with 1.5 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$157.00
Fit Kit SET815 contains all the parts needed to thru axle mount an Old Man Mountain bike rack to the rear of your bike with a 12mm rear thru axle. This kit includes: - 12 x 217—229mm thru axle with 1.0 mm thread pitch - A pair of pucks - Clear protective tape - Stainless steel mounting hardware - Axle mounting increases our rack's load capacity to 70lbs/33kg - Fit Kits make it easy to swap between bikes or front and rear mounting with just a few bolts - Fit Kits protect your bike. Not all bike eyelets are meant for racks, most are only made for fenders or have very low weight limits. Axle mounting protects your frame We partner with The Robert Axle Project to supply our thru axles. Axle Length does NOT equal hub standard. This refers to the length of the axle shaft. All axles are compatible with +/- 2mm.
$24.99
When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.
$21.50
These finely crafted cable guides are the ultimate accessory for your Fox fork! Now you can color match your cable guide to the Red and Blue adjustment dials, your frame color, your stem color, pretty much anything! Offered in Black, Gold, Pewter, Red, and Blue anodized finish. Fits: 2008–2020 Fox 32, 34, and 36 Forks 2014–2020 Fox 40 (Post mount brake) 2019–2021 Marzocchi Bomber Z1, Z2, DJ and Bomber 58 Supplied with (1) M3 x 8 screw
$20.00
These finely crafted cable guides are the ultimate accessory for your Marzocchi fork. Color match your cable guide to the Red and Blue adjustment dials, frame color, stem color, and pretty much anything! Offered in Black, Gold, Pewter, Red, and Blue anodized finishes. Fits 4x DJ1 44 55 66 & 888 Supplied with (1) M3 x 8 screw
$39.00
NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.
$104.99
Our new derailleur cage for Shimano 12-speed MTB derailleurs is everything you need from a derailleur cage. We've united extreme rigidity (cage is CNC-machined out of 7075-series aluminum alloy), feather-like weight (48 grams) and exciting color options. - 7075-T651 Anodized Aluminum Alloy - 48g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs. Compatible rear derailleurs: Shimano 12-speed: RD-M7100 (SLX), RD-M8100 (XT), RD-M9100 (XTR) SGS (long-cage version only).
$229.99
With Garbaruk RD cage set for 12-speed SRAM AXS rear derailleurs, you can squeeze much more performance out of your drivetrain thanks to the combination of rear derailleur cage, oversized pulleys and extender link which allows to get more drivetrain range, smooth shifting, and more precise operation of your bike transmission. You can now use cassettes up to 52T to build up your Gravel/CX bike. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 10-33T cassettes to be capable of running smoothly with 10-52T cassette. Fully compatible with Sram 12-speed AXS flattop chain. IMPORTANT: To be used in 1x setup only with the listed compatible rear derailleurs. Compatibilitty: SRAM 12sp RED AXS, SRAM 12sp FORCE AXS, 12sp Rival AXS, SRAM etap 11speed A2 rear mech, with 11/12-speed chains including Shimano HG+ and SRAM AXS flattop.
$104.99
Upgrade your standard SRAM rear derailleur with our 12T+16T set coupled with Garbaruk RD cage for SRAM derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 21g Compatible rear derailleurs (when equipped with Garbaruk cage): SRAM 11-speed: NX, GX, X1, X01, XX1, APEX 1, Rival 1, Force 1. SRAM 12-speed: XX1 Eagle, X01 Eagle, GX Eagle, NX Eagle, GX Eagle AXS, X01 Eagle AXS, XX1 Eagle AXS. Bolts for pulleys are not included
$104.99
Upgrade your standard 11-speed rear mech with our 11T+16T set coupled with Garbaruk RD cage for 11-speed Shimano derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 20g Compatible rear derailleurs (when equipped with Garbaruk Shimano 11 speed cage): SLX RD-M7000-11-GS, XTR RD-M9000, XT RD-M8000 Bolts for pulleys are not included
$104.99
Upgrade your standard 12-speed rear mech with our 14T+16T set coupled with Garbaruk RD cage for 12-speed Shimano derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 22g Compatible rear derailleurs (when equipped with Garbaruk Shimano 12 speed cage): SLX RD-M7100-SGS, XT RD-M8100-SGS, XTR RD-M9100-SGS Bolts for pulleys are not included
$32.00
Fits: - Giant Reign - Giant Anthem X - Giant Trance X Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0023
$54.00
Fits: - 5010 Aluminum V3 - 5010 Carbon V3 - Blur Carbon V3 - Bronson Aluminum V3 - Bronson Carbon V3 - Highball Carbon V3 - Hightower Aluminum V2 (not including 2022) - Hightower Carbon V2 (not including 2022) - Tallboy Aluminum V4 Santa Cruz Part Number: 23-18684 Features: - CNC machined from 6061 T6 Aluminum - Anodized finish - Model: NSB DH0137
$32.00
Fits: - Cervelo S1, S2, S3 2009 - 2010 - Cervelo R3SL, R3, RS 2009 - 2010 - One 2003 - 2004 - Dual 2003 - 2005 - Soloist Team 2004 - 2006 - Soloist Carbon 2006 - Soloist Carbon SL 2006 - R2.5 2003 - 2005 - R3 2006 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0037
$51.00
Fits All bikes other than Following V1 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0173
$32.00
Fits: - 2010 Scott Spark 35, 40, 50, 60 - 2010 Scott Scale 50, 60, 70 - 2010 Scott Voltage YZ 35, YZ 25, YZ2 - 2010 Scott Contessa Spark 25, 35 - 2010 Scott Contessa 20, 30, 40, 55, 60 - 2010 Scott Aspect 20, 30, 35, 40, 45, 60 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0044
$39.00
Fits: - Scott Addict CX - Scott CR1 series road frames Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0090
$39.00
Fits: - 2019 to current GT Fury models - Not for Shimano direct mount derailleurs GT Part #: K33039 Features: - CNC machined from 6061 T6 Aluminum - Anodized finish - Model: NSB DH0184
$37.00
Fits: - 2015 - 2019 Meta HT 20 and Meta HT 24 - 2017 - 2019 Meta HT JR - 2014 - 2017 Meta HT AM - 2015 - 2017 Meta HT TR - 2014 - 2015 Meta HT SX - 2016 - 2017 Babylon Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0159
$104.99
With Garbaruk RD cage for 11/12-speed SRAM rear derailleurs, you can squeeze much more performance out of your standard 11-speed rear derailleur. You can now use cassettes up to 50T, which provides 11-speed 1x drivetrain range close to that of 12-speed ones. All you need is to replace the cage of your standard SRAM rear derailleur with Garbaruk RD cage. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 11-42T cassettes to be capable of running smoothly with 10-50T cassette. - 7075-T651 Anodized Aluminum Alloy - 42g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs Compatible rear derailleurs: SRAM 11-speed: NX, GX, X1, X01, XX1, APEX 1, Rival 1, Force 1. SRAM 12-speed: XX1 Eagle, X01 Eagle, GX Eagle, NX Eagle, GX Eagle AXS, X01 Eagle AXS, XX1 Eagle AXS.
$104.99
With Garbaruk RD cage for 11-speed Shimano rear derailleurs, you can squeeze much more performance out of your standard 11-speed rear mech thanks to the more efficiently positioned rear derailleur cage. You can now use cassettes up to 50T, which provides 11-speed 1x drivetrain range close to that of 12-speed ones.. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 11-46T cassettes to be capable of running smoothly with 10-50T cassette. - 7075-T651 Anodized Aluminum Alloy - 48g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs Compatible rear derailleurs: Shimano 10-speed: Deore (M6000, 10-speed model) Shimano 11-speed: RD-M7000-11 (SLX), RD-M8000(XT), RD-M9000 (XTR) **NOTE: NOT compatible with Di2 (XT M8050, XTR M9050) rear derailleurs.**
$104.99
Now you can use wide-range cassettes (up to 50T) with your GRX rear derailleur. Moving the upper derailleur pulley closer to the smallest cassette cog, and lower one further away from the largest cog allows your regular GRX derailleur to operate seamlessly with wide-range cassettes, like the Garbaruk 11-50T 11-speed model. - 7075-T651 Anodized Aluminum Alloy - 47g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs. Compatible rear derailleurs: Shimano 11-speed: RD-RX812 (GRX)
$38.00
- CNC machined from 6061 T6511 aluminum machined surfaces allow for better caliper alignment and more rigid brake set-up - 10-15% lighter than OEM adapters - Fit all standard 74mm disk brake calipers
$38.00
CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal to front and rear brakes. Frames and forks that use the post mount brake interface use a stock size that varies from 160mm - 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size.
$84.99
Replacement idler and idler kits for high-pivot Trek Session bikes. Fits: 2022 Trek Session Specifications: Size: 13T Standard tooth profile Alloy option machined from solid 7075 T6 Aluminum Anodized pewter with laser etched graphics Steel option machined from 4140 Steel Nitrox coated with laser etched graphics Idler kit includes Enduro 6903 LLB ABEC-3 bearing and retaining clip Model: NSB IP0004
$39.00
NEW: Please refer to our table graphic in the images for the correct adapter size you need. CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4 etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. ?Not currently compatible with TRP 203mm rotors.
$29.99
These jockey wheels use durable stainless steel ball bearings to improve drivetrain performance. They are ideal for cycling in the rain, or for demanding conditions such as mountain biking or cyclocross. They are lubricated with grease and maintenance-free.
$39.99 - $59.99
Precision CNC machined of light and durable 7000-series aluminum with a fine anodized finish, and 100% made in the USA, Thomson's Seatpost Collar is a beautiful upgrade for your bicycle. It features their bolt, washer and barrel nut combination that allows float on both sides of the collar slot for consistent clamping force. Plus the bolt-hole angle, the collar's 12.7mm inside height and the offset slot, ensure optimum seatpost clamping force at only 25 inch pounds of torque to protect your precious frame and seatpost.
$14.99
The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.
$4.99
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
$14.99 - $19.99
- CNC machined aluminum alloy - Fits 26.8mm (1-1/8-inch) steer tube
$14.99
Forged Alloy seat-clamp. - Offset cut is safer to use with carbon posts
$24.99
The Problem Solvers Braze-On Front Derailleur Adapter simply clamps onto your frame's seat tube and provides a secure place to bolt on your braze-on front derailleur (sold separately). This fine adapter is made of light, durable aluminum and includes a stainless-steel bolt.
$54.99
Pair this kit with a cassette cog of your choosing (sold separately) and discover the joy and simplicity of a singlespeed without the cost of a new wheel. The Singlespeed Spacer Kit includes a variety of high quality aluminum spacers so you can dial your chainline and a stainless steel lockring to tighten everything down right.
$12.99 - $14.99
The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.
$54.99
Get the most out of a small investment! These replacement jockey wheels use ceramic ball bearings and are made of wear-resistant plastic with a very long service life. This produces a high-efficiency jockey wheel that runs very smoothly. Suitable for road and mountain bikes (SRAM).
$54.99
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Novara #Q28-4139 - (2) M4x8 Flat head screws included Note: This dropout is very similar to Wheels Mfg DROPOUT-243. Look carefully at the machined cutout on this hanger and Wheels Mfg DROPOUT-243 to determine which hanger fits your frame.
$14.99
The Problem Solvers Clamp-On Cable Hanger is made of light, durable anodized aluminum and fits on bicycles with 1- and 1 1/8-inch forks. A cable noodle and guide are included.
$44.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$11.00
- Truvativ Crank arm bolt, M12, Capless, For Howitzer, Bag of 2
$57.49
Preload assembly from Cane Creek.
$16.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Lightweight aluminum construction - Allows the installation of a straight steerer fork without changing out the headset lower
$124.00
Lyrik RC2 C1 200 Hour Service Kit
$40.00
Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)
$224.99 - $399.99
Cane Creek's 40-Series sets the standard for performance, durability and value. Drawing from the premium 110-Series design, the 40-Series includes all the features necessary for a durable, lightweight, long-lasting headset.
$31.99
This is a pair of spacers that adapts a 386 EVO crankset to a 68mm BB30 or PF30 frame; use in combination with the standard bottom bracket for your chosen frame.
$34.99
Disc Brake Adaptors - Includes Stainless Bolts
$47.99
Wheels Manufacturing Dropout Savers are designed to replace damaged threads in rear derailleur mounts. Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout. - Wide Dropout Saver (DS-1) fits dropouts thicker than 7mm - Narrow Dropout Saver (DS-2) fits dropouts 7mm or less in thickness - 2 pieces per bag
$57.99
Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA
$99.99 - $106.99
The spindles are manufactured for Stages Cycling by Full Speed Ahead, forged and machined out of aluminum to allow for the carbon Stages Power meter for FSA 386 EVO and Stages Carbon 30mm model to be used with many SRAM BB30 road and SRAM BB30 mountain bike drive side cranks, as well as SRAM DUB MTB, Race Face Next SL and Specialized S-Works Road. The Stages Power meter 30mm spindles are specifically designed to meet or exceed the performance of the manufacturer's stock component, while allowing the retro fit of the new carbon Stages Power Meter to a rider's SRAM and Race Face drivetrain. Stages Cycling BB spindles are available in six options: A) SRAM Red 22 BB30 B) SRAM Force 22, Rival 22, Force/Rival CX1 C) 2015MY SRAM BB30 mountain cranks - 9mm spacer* D) 2015MY SRAM BB30 mountain cranks - 15.5mm spacer* E) Race Face Next SL - 168mm q factor F) Specialized S-Works Road - 2017/2018MY G) SRAM DUB MTB * Not compatible with 156mm Q-factor
$24.99
DEITY Circuit Seatpost Clamp. Rounded edges, minimized size offer the perfect touch of refinement and style. - DEITY Circuit Seatpost Clamp - 38.6mm, Blue
$10.99
Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.
$104.99
A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor
$7.49
Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Soft
$17.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk Elastomer 3 - 50 Durometer, Soft
$17.99
Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 5 - 60 Durometer, Medium
$71.49
- Machined aluminum replacement derailleur hangers to fit a wide variety of frames - Please visit https://wheelsmfg.com/derailleur-hanger-tech-help for more updated info - Made in USA + Scott Spark 760 2017+; Spark 960 2017+; Contessa Spark 730 2017+
$31.99
Loose ball bearings in bags or bottles. - Replacement loose ball bearings
Page 1 of 22 Next page