Other

RockShox Rear Shock Parts

Eyelet Bushings for repair and maintenance of Rockshox rear shocks.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Driver Spacer - Alloy, 10.7, EXP

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

Flat head screws from Wheels Manufacturing.

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert - X-Soft

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Firm

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek ST G4 Elastomer Insert -Medium

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

Flat Mount Disc Caliper Bracket Bolts

Replacement foam rings and bottom out bumper for your REVIVE MAX dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper

Replacement foam rings and bottom out bumper for your BikeYoke dropper post. The foam ring in the lower tube of your BikeYoke dropper post is a crucial component that prevents water and dirt from entering your post too easily. Keep it dry and clean at all times so your post can breathe and replace if needed. Kit includes: - 2x foam ring - 1x bottom out bumper Fits: - REVIVE (not REVIVE MAX) - DIVINE - DIVINE SL - DIVINE SL Rascal

Designed around the DVO Onyx SC fork to allow fitting the EVO Bolt-on fenders via the 3 bolt holes in the back of the fork. Also compatible with the Sapphire and Diamond fork. Compatible with Mudhugger EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x DVO Adapter bracket - 2x 12mm M4 bolts - 1x 16mm M4 bolt (for centre hole) - 2x self-tapping screws

Ohlins adapter kit for fitting the EVO Bolt-on fenders to your OHLINS forks. Compatible with RXF 38 (2019+) and DH forks. Minimum Fork Offset: 44mm Compatible with Mudhugger EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x Ohlins adapter Bracket - 3x M4 bolts - 1x Hex key

Small parts for Wolf Tooth ReMote.

- Grade 10 chromium steel balls

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

RockShox XLoc Parts

Customize your ride with SRAM bar end plugs.

Saddle clamp heads and lowers for KS Dropper posts.

Forged Alloy seat-clamp.

A traditional saddle clamp for use with vintage, older and inexpensive seatposts without an integrated clamp. - For use only with plain/pin-style seatposts that require a separate saddle clamping mechanism at the top - One bolt tightens the clamp to the rest of the seatpost and to the saddle rails at the same time. - 22.2mm / 7/8 fit with angle adjustment via serrated washers - Steel construction with ED black finish

Replacement bushings for Cane Creek shocks.

This is a MegaExo Left Crank Bolt for 19mm MegaExo Cranks. - M12 bolt

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

The ZEB Adapter for fitting the EVO Bolt-On fenders to your Rock Shox ZEB fork. Minimum Fork Offset: 44mm Compatible with EVO Shorty Bolt-On and EVO (Long) Bolt-On fenders. Kit includes: - 1x ZEB adapter bracket - 3x M3 bolts - 3x M3 washers - 1x 3mm bolt sleeve

Internal components for servicing the Reverb and Reverb Stealth mechanism.

- Converts 140 post mount to 160 or 160 post mount to 180mm - Simplified and lower profile design allows for the use of only 2 bolts instead of 4 - Compatible with all TRP and Tektro disc caliper 160, 180, and 203 rotor sizes

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Our clever Splits clamp attaches our Triggy directly to the handlebar. Special plastic compounds and production process allow flexibility within the clamp to have it installed, while grips and brakes are still on the bars. Just snap it on! A heat treated inlay made of stainless steel with a laser engraved finish, give it a unique and classy look. By the way: SRAM shifter triggers can also also be attached to the handlebars using our Splits clamp.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Profile Design’s Venturi Pads are the correct foam replacement pads for your Profile Design Century Aerobars (sold separately). They have adhesive on the bottom.

Replacement M6 Short Nut/Bolt Set for Wheels Mfg. derailleur hangers. - Custom M6 short chainring bolt style fastener - Use with 4mm hex wrench - Length of bolt: 6.4mm under head - Length of Nut: 3.5mm (under head), 5.2mm (overall)

RockShox cable and hose guide.

RockShox hydraulic hose guide.

Brake Pad Spreader Springs - Available for Guide Ultimate and Guide X0 brakes

X01 Eagle Cable Anchor Kit

Chainring Bolt Kit - 4 Arm Single with Aluminum Guard

- Chain Ring Bolt Kit 4-arm Triple

- Truvativ Crank arm bolt, M12, Capless, For Howitzer, Bag of 2

- Plastic bar end plug pair for 22.2mm extensions

Carbon fiber headset stack spacers, precision cut to ensure proper headset function. - Compatible with all threadless and threaded headsets

Screws required for mounting Campagnolo hydraulic rear calipers to bicycle frames. Lengths unique to frame specifications.

Replacement seals for servicing Cane Creek rear shocks.