Grips & Tape

Leezy was cutting the inner flange off his Paley Slims so that the mushroom part of the grip went right to the end. His reason being that that it was comfier to catch barspins on. BSD designed the new Leezus Handles around that idea, coupled with their new softer stickier compound these slim grips feel as good as they look.

Simple mushroom style design made of Krayton rubber. - Flangeless slim mushroom design - Bar ends included

Dan Paley signature grips: Dan Paley is really fussy when it comes to grips, not too fat, not too thin, not too squishy, the list goes on. The Dan Paley Slims however are just right. - Flangeless Dan Paley zigzag design - Krayton rubber - Bar ends included

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

All the quality and performance of SPANK's SPOON grips, in a new 100mm length specifically designed for kids. One of the most common complaints of young riders is that adult grips position their hands too far from the controls, making them move their hands around while riding, or risk pinching fingers in brakes. The new SPOON Grom grips alleviate this issue, putting their hands in the right place every time, and allowing them to set up their handlebar controls just like dad! Material: Tacky rubber, alloy clamp rings Length (mm): 100 Diameter (mm): 30 Weight (g): ±95/set Features: Tailored to fit children's hands; two anodized alloy clamp rings; plastic safety end plugs; micro diamond pattern

Spoon Grips have an incredibly slim, low profile design and grip pattern, yet remain reasonably comfortable due to a special tacky rubber compound. Double locking alloy rings keep them secure in any conditions, and soft plastic end plugs protect you from barends. Need the confidence of locking grips without the high price, try a set of Spoons! - Micro diamond pattern tacky rubber grip - Two anodized alloy lock ring clamps - Length: 130mm - Diameter: 30mm - Weight: 110g/pair - Plastic end cap included

Gel rubber construction for the optimum balance of comfort and durability. - Waffle grip pattern provides excellent grip and vibration dampening - Flange provides added contact enhancing control - Flange cut-away provides shifter and thumb clearance - OD: 30mm - Length: 135mm

60g per pair with end caps - 130mm long - 32mm OD

Luxurious EVA foam. - Excellent OEM replacement - With adhesive backing - 210 x 3cm - Black screw-in end plugs included - A whole spectrum of color options

Oury single compound grips. Simple & classic. - Soft grips with raised blocks

Profile Design's Bar Wrap is a synthetic handlebar tape that offers a nice grip, padding for comfort and that comes in many colors and designs to add some bling to your road bicycle. It's also stretchy and extra long for easy installation, and durable, too.

Give your bike some personality and a comfy ride with Profile Bar Wrap. This beautiful handlebar tape will definitely make you stand out in a crowd. And, with extra stretch and length, it's easy to wrap, too!

SRAM's SuperCork Bar Tape looks good and feels great. This light, stretchy tape is easily installed and adds a touch of class to any bike.

Superior hand feel that you need to feel to believe. Winner of world cups, Cape Epics, and stages of La Ruta de Conquistadores. - Material: Dual-density high-performance rubber - Supacaz pattern design for max control and ultimate tackiness - Diameter: 32mm - Star Ringz: 100% Aluminum - Anodized/powder coated - Laser-etched

F-1 Series Float Grips are made from our exclusive A.I.R.E. compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Micro-textured surface pattern improves tackiness and control - Smooth profile for a consistent feel

F-1 Series Vapor Grips are made from our exclusive A.I.R.E compound which infuses air into the grip, reducing weight by over 30% and providing a slower rebound and response for improved comfort. - Medium diameter (31.5mm) - Reinforced inner layer for added durability - Added surface pattern provides improved grip in all conditions - Ergonomic finger cutouts for a better gripping surface and improved control

Race Face Half Nelson Lock-On Grips • Super-slim profile • Race Face MX style half waffle for extra grip security • Topographical moisture channels • Compatible with ODI lock jaw clamps

This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs. - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing

The Bartender, the Jagermeister of grips. No fuss rubber, lock on and rock out. The combination of a tacky rubber compound and the knurled pattern offers the bench mark in traction and durability. - Weight 90g - Single lock on - Low profile design - 30mm Diameter

Give your bike some personality and a super comfy ride with Profile Bar Wrap. The gel cushion damps vibration better and leaves you fresh so you can go longer. It comes in many colors for customizing your ride. And, with extra stretch and length, it's easy to install, too.

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

Feel it to Believe it. A perforated core design allows more 20A Durometer rubber to sit between your hands and the bar. Concentrated thickness under the palm increases ride comfort and reduces fatigue. Plus, the angled mushroom ribs wick moisture away for glove-free grip goodness.

SRAM's Locking Foam Contour Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

SRAM's Locking Foam Grips offer the soft feel of foam with the easy installation and security of a lock-on grip.

Plush, high grip, perforated polymer tape - 210 x 3cm - Waffle texture with super gel - Adhesive backed - Black screw-in end plugs included

Lock on to the trail Confidently handle any trail with the XR Elite mountain bike grip. This 30mm single lock-on grip features core lock clamps to hold tight on any terrain, and the perfect combination of rubber compound and tread design adds comfort and confidence on any trail. Key features - Tread and rubber compound provide secure grip, control, and comfort - Tread features continuous channels to funnel sweat for effective moisture management - Single-clamp design maximizes grip surface for secure, predictable performance - Core-lock clamp eliminates slipping by securing grip core to bar - 3mm M4 bolt increases hold and resists stripping - 30mm diameter

The Knuckleduster features a tapered internal sleeve that you have to tap onto your handlebar for full engagement. This tapered sleeve feels like it is already locked into place once fully tapped onto the bar and coupled with a single bolt lock-on clamp, you will not develop any play. The body of the grip combines the best elements of a half-waffle, mushroom ribbing, and an ergo feel. Featuring a mushroom pattern to minimize vibration. The Knuckleduster grips are an all day grip that allow you to keep it Pinned Wide Open at all times.

Overwhelming demand for a diamond version of the Deity Knuckleduster lead us to the phenomenal feel of the Lockjaw.. With sweeping transitions from the padded thumb area to the deep dish diamond top pattern to a recessed half waffle, the Lockjaw delivers a technically precise feel from end to end. Utilizing TRC+ rubber compound allows us to maintain industry leading durability but delivered in a soft, plush and sticky durometer. By combining our tapered inner sleeve and single lock ring system coupled with our new extra grippy rubber and recessed half waffle, the Lockjaw gives you an extremely responsive feeling cockpit

- The thinnest DEITY grip to date - Featuring soft DEITY TRC+ rubber compound for durability and increased grip - Tapered inner sleeve to ensure perfect contact with the handlebar - Single clamp design with forward facing bolts that feature loc-tite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort and full range of control - Diamond pattern wraps around the end of the grip - 133.75mm length with a 30.5mm outer diameter - Not compatible with bar ends or plugs - Intended use: All MTN / Enduro / DJ / Slopestyle and DH - 96 grams for the set INSTALLATION TIP: To fully and properly install your SLIMFIT grip due to the tapered inner sleeve...make certain to whack the end of the grip 3 times with the palm of your hand until the grip fully seats onto the handlebar. If you find the fit is a bit tight due to your particular handlebar, a small amount of Isopropyl Alcohol can work wonders for lubrication. Finish the install by tightening the hardware to the specs listed on the packaging.

- 31mm grip with micro diamond pattern - Kevlar infused TRC + rubber compound

We've redeveloped our TRC+ rubber compound to deliver 33% more grip and cushion without compromising the amazing durability you've come to expect from all DEITY Grips. Rounding out our grip line to offer something for everyone, the SUPRACUSH Grip delivers the most comfortable and deeply cushioned grip on the market. It's the perfect grip for riders of any hand size looking for increased vibration damping, a larger feeling grip, or a more supple ride. Not only does the SUPRACUSH give you an unmatched level of cushion with our TRC+ rubber compound, but the larger deep-dish diamond pattern offers the most comfortable grip possible without compromising control, precision, or durability. - 34mm outer diameter with plush cushioning throughout - Deep-dish DEITY diamond pattern compresses for comfort but also provides traction - Features soft DEITY TRC+ rubber compound for exceptional durability and increased grip - Tapered inner sleeve to insure perfect contact with the handlebar - Single clamp design with forward-facing bolts that feature Loctite - Lasered black ano 6061 T6 aluminum clamps - Seamless transition through the end of the grip for comfort - Capped end for safety and comfort - 133mm length with 34mm outer diameter - Intended use: All MTN / Enduro / DJ / Slopestyle / DH / and any other riding style of choice - 118 grams for the set

- Dual Density Design - Integrated, 1pc Lock-On - Tapered Inner Core – prevents slippage - Mushrooms for ultimate comfort - Ergonomically ramped and undercut grabbers for superior grip - Ovalized design for ultimate comfort and control - Circular Iconic dampers - Flared outer ends

Keep your bike looking good with SRAM's DoubleTap Lever Hoods matching your frame. They're made of a soft, grippy rubber and will enhance any bike's appearance.

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 30 - Weight (g): ±115g / Pair

- A totally new grip designed from the ground up to give you more control and comfort then ever before! - Single lock ring design and smooth thumb zone. - Reinforced bar end area - Anatomical bar end design supports and protects the little finger - Cut outs improve impulse shock, vibration absorption and comfort - Interlocking columns support low profile fins to create a tread pattern which offers the benefits of both a finned grip and a low profile - Features: Single lock grip, low profile 30mm diameter, tapered bar ends, Spank 'Human Factor' grip pattern. - Material: Rubber, alloy clamp, plastic base, steel bolt - Length (mm): 145 - Diameter (mm): 33 - Weight (g): ±115g / Pair

- Clear, gel pads provide added shock absorption while positioned between the lever hood and top-handlebar transition under handlebar tape - Two, left and right sets with integrated channels for either inside or outside, under tape cable routing

• Replacement locking handlebar grip sets for XX1 Grip Shift • includes one 100mm right and one 122mm left grip • Available in black or silver.

These grips are brand new OEM take-offs (from a stock Yeti build) and as such do not include retail packaging. The Elite Pro grips feature an ergonomic design that conforms to a rider's hands without feeling bulky. - Single clamp design - Half-waffle pattern on the front of the grip provides extra control when you are off the back of the bike - Length: 130mm

The Goats Grip just went Super Soft. Prototyped through the 2020 season and based on the World Cup Winning pattern of the Bartender Pro as used by Greg, as well as Nina Hoffman, Danny Hart and Angel Suarez. - Super Soft Compound - 31.5mm Diameter - Single Lock-on - Tapered Core

- Aluminum clamps secure the grip on both ends using a hex wrench - Loosen pinch bolts and grips slide on or off with ease - 130mm length for standard shift/brake setup (not for twist shifters, use 90mm replacement grip options for twist shifters)

Give your bike some personality and a comfy ride with Profile Karbon Bar Wrap. The simulated carbon look adds some style to your ride. With extra stretch and length, it's easy to install, too. Plus, it comes with Profile's Karbon plugs.

Single aluminium clamp design with covered/hidden bolt - Dual-compound with soft grip area and harder endcaps for impact and scratch protection - Non-centric, offset-design. The grips are indeed round, but the rubber is thicker on the rear side, so we have around double the rubber thickness on the palm side - Cut-out inner sleeve for extra rubber thickness on the palm outside for even more extra padding and damping - Relief pattern on the outside palm area (rider facing) and on the fingertips area (front side) for feeling and grip - Weight: 113g /pr - Length: 140mm - Diameter (rubber part): 31mm - For handlebar diameter: 22.2mm

NEW SUPERLIGHT XC GRIP FOR 2022! In cooperation with an extensive industrial network in Germany, Ergon‘s Research & Development Team has created a new grip for the Ergon line-up. The new foam-like material offers high damping thanks to the unique material characteristics and achieves a precise texture that matches the zones of the hand. Until now, this was nearly impossible with simple ultralight grips on the market today. Ergon GXR - hand ergonomics and lightweight proprietary AirCell Rubber compound 100% made in Germany! - Size Small: 32mm / 80 grams - Size Large: 34mm / 95 grams - Use: XC, Marathon, Bikepacking, Endurance - Grip material: proprietary AirCell Rubber - SGS Certified for purity and quality - Right and Left hand specific grips. - Completely new grip material for increased damping on your favorite trails. - Optimized form allows for reduced gripping force. - Grip zones are matched to the hand. - Replaceable end plug. - Carbon bar compatible. - No inner core. - No locking clamp.

We can't promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our all-new Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter and long days in the saddle. The Loam Grip features two contrasting patterns, and these dueling motifs play an important ergonomic role. Thin strips run horizontally across the grip's surface for enhanced traction and supple feel, while the thicker mountain pattern helps support the pad of your hand. Beefing up this outer zone with a heartier design combats compound deterioration, ensures the grip is absorbing more vibration, and provides needed structure to support the additional body weight pressing down on this area. The Loam Grip was purpose-built for Enduro/Trail riding, and with that in mind, picking the compound was extremely important. We needed to identify a blend that was soft enough to absorb vibration, yet firm enough to keep its shape under pressure. We call this the "happy camper" blend because it strikes a balance between an ultra-soft material that wears too quickly and a harder compound that provides no tactile benefits. - Diameter: Avg. 30mm - Weight: 90g/pair - Width: 133.5mm - Durometer: 25A Happy Camper Compound - Clamp Style: Closed End, single clamp

Get A Grip. We can't promise to keep your hands warm as the seasons change, but we can keep your paws feeling fresh with our customer loved Loam Grip. We packed this grip full of features, like an ultra tacky compound and ergonomic pattern to support your palms and help relieve any fatigue caused by trail chatter and long days in the saddle. The OG colors of the rainbow are also available in our Loam Grip XL, which gives the right amount of comfort for the rider who prefers a beefier grip. • Loam Grip OG locks in an average diameter of 30mm, while the Loam Grip XL covers up to 34mm of comfort • Comfort grip zone with an overall length of 133.5mm • Lightweight performance: OG 90g / XL 120g (a pair) • Closed end, single clamp compatibility

- Made with DuPont Kevlar brand resin for softer, tackier and longer lasting grips - Used by top professional racers around the world

SRAM's Locking Grips have clamps on both ends for a secure bar hold. Their rubber surface and "S" logo design offer a great feel.

SRAM's SuperCork Bar Tape boasts a soft, stylish suede finish for a great grip and feel with or without gloves.

• Replacement locking handlebar grip sets for X0 and XX Grip Shift • Available in 100mm and short length 85mm shifter with interlocking Grip Shift interface and single bolt clamp. • Available in full-length 122mm grips with dual locking bolt clamps. • Available in black and silver.

Super tacky (in a good way) Confidently ride in all conditions with the no-slip grip of our Perf Line Handlebar Tape. This tape adds an extra layer of comfort with shock-absorbing foam, and keeps your bike looking classy and sleek with perforated details and a thinner profile. Handlebar tape with extra-tacky texture, classic perforation, and a thinner profile that lends a better grip on road rides. - Super-tacky texture offers a no-slip grip - Classic perforated styling adds texture and looks clean - Ideal stretch allows quick and easy installation - Shock-absorbing foam elevates comfort - Finishing strips and reflective Bontrager bar end plugs included - Adhesive backing simplifies installation - Thinner profile for a sleek look

"Make a grip with the fussiest rider on the planet, you must be mad!!" The Bartender Pro is the next level in grip design for Burgtec. We've collaborated with 3x World Champion Greg Minnaar to hone the construction of this grip to produce unrivaled vibration dampening. - 31.5mm Diameter. - 30A Rubber Compound - Single Lock On

Ergon's GA2 All-Mountain / Gravity grip has superb tactile feel thanks to a super-soft, UV stable rubber compound exclusively developed and manufactured in Germany for Ergon. The ergonomic shape requires less rider grip pressure while specific grip zones matched to the shape of the hand increase tactile feedback and traction. The inner construction varies in thickness to allow greater damping, which results in less ulnar nerve stress. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly.

Ergon's GA2 Fat is for riders with large hands or high demands for damping, offering extra thick circumference. The ergonomically optimized form allows reduced force while gripping, because the grip zones are matched to the hand, allowing greater control on demanding trails. The inner construction varies in thickness allowing for greater damping without loss of control. The GA2 Fat has a superb tactile feel, and the super soft, UV-stable rubber compound is exclusively manufactured in Germany for Ergon. The inboard aluminum clamp holds grips securely, allows even more grip area at the end of the bars, and makes these grips carbon-bar friendly. - Length: 136mm - Lock On: Yes - Weight: 135g

- 32.3Mm thick durasoft polymer (Dsp) - Micro-Chevron grip pattern for superior comfort, Feel and control - Ultra lightweight at 30 grams per set - Includes plugs and double sided tape

The MacAskill grip features a larger diameter in key areas of the grip to provide better cushioning for impacts and vibration dampening. - Designed and ridden by Danny MacAskill - Single-sided lock-on grip - 29–30mm diameter

The Charger Evo is the most complex grip we’ve ever created. Dual patterned textures on each grip allow riders to absorb shock and feel handlebar support with every move. Lock-on ring design ensures the grip will stay in place for long lasting use. Lock-On Grips include the grips, clamps, screws, and plugs. - Length: 136mm - Weight (with plugs): 90 grams - Diameter: Medium (31mm)

Utah's Delicate Arch printed pattern pays homage to the state's mountain biking trails while providing excellent traction. Lock-On Grips include the grips, clamps, screws and plugs. - Length: 130 mm - Weight (with plugs): 114 grams - Diameter: Small (30.5 mm)

The North Shore mountains of British Columbia are home to some of the most amazing trails in the world. We are not only excited to announce the redesigned Northshore grip but also our new partnership with the North Shore Mountain Biking Association. A percentage of the proceeds from the sales of these grips are used to support the NSMBA and the trail building on the North Shore. The new Northshore grip is our thickest lock-on grip and features a series of textured shock absorbing sections to provide a comfortable and controlled ride. - Length: 130 mm - Weight (with plugs): 125 grams - Diameter: 33 mm

Ride like a pro with the Steve Peat inspired Signature lock-on grips. Lock-on grips are designed to easily slide onto the handlebar and clamp with the rings to ensure it is secure and won’t slip during the most intense rides. Providing a sturdy ride, the patented lock-on design eliminates unwanted movement to maximize the rider’s control and comfort. Lizard Skins lock-on grips include the grips, clamps, screws, and plugs. - Length: 130 mm - Weight (with plugs): 112 grams - Diameter: 30.5 mm

The classic upper pattern with a waffle finger hold for a better grip. - Compatible with MTB, BMX, ATV, PWC - Weight: 101 grams - Length: 135mm - Diameter: Medium (31mm)