Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

$15.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. • POM-injected handle • Stainless steel barrel • Thumb and index finger grips for more comfort and control • Compatible with studs that have a 3.5mm or smaller shaft • Tire studs sold separately
$2.00
Replacement threaded cap for Abbey Hanger Alligment Gauge Tool.
$24.00
Replacement shaft for Micro Bearing Press - 1/4" shaft diameter - 12" length
$25.00
The soft face on the Titanium Hammer is destined to be gouged, get worn down, or even melt (if you leave it near heat). Replacement soft face for Abbey Titanium Hammer.
$30.00
Replacement pins, these are original equipment chain pins for our chain tool, they also work as an alternate to the Campagnolo UT-CN300 11spd chain tool, Shimano CN-34 and CN-32 Sold in pairs.
$30.00
Replacement feeler gauge for the Abbey Hanger Alligment Gauge Tool.
$30.00
For use with 1/4" Micro Bearing Press Shaft
$30.50
The soft face on the Shop Hammer is destined to be gouged, get worn down, or even melt (if you leave it near heat). Replacement soft face for Abbey Shop Hammer.
$45.00
For use with 1/2" Micro Bearing Press Shaft
$45.00
Replacement 6/8mm Hex bit for both the Abbey BBQ Wood Handled Pedal Wrench and the Team Issue Pedal Wrench.
$59.50
1/8" mid plate, needed to use the Decade chain tool with wide 1/8" track and single speed chains.
$61.50
The Brass Face for the Shop Hammer is a fantastic option when hammering on metal and you need something softer than the material your are pounding on.
$78.00
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$78.00
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$78.00
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$78.00
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$78.00
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$78.00
This tool makes dust wiper installation an easy task. Drivers are made in diameters specific to stanchion sizes for most modern forks including 32, 34, 35, 36, 38, and 40mm. The Fork Seal Press is built with modern tight fitting fork seals in mind. Using a common handle with a stainless steel striking surface to give excellent durability when setting seals with a mallet. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time. *** Note, these drivers are designed to be used with our handle, hitting them directly with a hammer can cause failure and will not be covered under warranty.
$78.00
This tool makes dust wiper installation an easy task. The Fork Seal Press is built with modern tight fitting fork seals in mind. The handle provides ample clearance for your hand around the fork crown while allowing a good grip to seat the seal. The Delrin drivers are built to use the upper fork bushing as a guide. Making sure the seal goes in square the first time, every time.
$86.50
This simple tool is designed to remove and install the static bearing in the shock ends of many modern rear shocks. Machined from durable stainless steel this compact tool allows the user to remove and install the DU bushings without resorting to hammers and punches. The coarse acme thread keeps the constant turning to a minimum.
$89.50
This dedicated socket is built to engage all 4 of the holes on a SRAM dub crank arm dust cap. These caps don't normally need to be removed but when you do need to work with them, few things work well. These tools feature a common 3/8" square drive like the rest of our socket range and also have a hexagonal exterior so you can mount them in a vise and use the crank arm as the lever if so desired. The sockets are also marked for the left hand thread (clockwise to loosen) this part uses. Compatible with all SRAM dub cranks, road/mountain/gravel.
$105.00
The Shimano Crank Tool (SCT for short) is specifically built to service the chainring lockring on Shimano single ring cranksets for 12 speed drivetrains. It features a large hex that can be used with a 1.5" or 38mm wrench or locked into a vise. The clearance hole is kept to a minimum to keep the tool engaged on the low profile lockring, minimizing the chance of damaging the tool or parts. Compatibility: - Chain ring lockrings on Shimano 12spd mountain crank sets. - XT and Ultegra bottom brackets
$109.99
The lever setter is a unique tool that works in conjunction with our HAG (or other hanger allignment tool) to set brake and shifter levers at the same height from side to side. The tool temporarily replaces the headset top cap and allows you to thread a hanger alignment tool into the lever setter. Use the HAG indicator to set levers the same from one side of the bar to the other. Once you're satisfied with your lever placement simply remove the tool and replace your headset top cap and go ride. Compatibility: Requires a star nut or compression plug with a M6x1 thread. Works with road and mountain shifters and brake levers. Compatible with most hanger alignment tools on the market. Recommendations: It's advised to use a spacer on top of the stem to help align the lever setter with the steer tube. This will reduce the impact the quality of the cut on the steer tube has on the function of the tool. The supplied threaded stud can be replaced with a longer one if needed.
$115.50
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.
$115.50
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.
$115.50
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.
$115.50
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket.
$115.50
The Abbey Bike Tools 4-way precision multi-tool is the perfect choice to carry with you while on a ride. We designed this beautiful green anodized tool to fit into a compact saddle bag, riding wallet, or tuck into a jersey pocket. Everybody makes a multi-tool and there's a little bit of everything on the market, so what's different about ours? All of the little things that add up to one nice little tool. A multi tool is only as good as it's tool engagement so that's where we started. If you're familiar with other Abbey tools you've no doubt noticed that they fit tighter than anything else out there and this one is no different. We use precision stainless steel bits that fit like a glove into the bolts on your modern bike. They wont strip out fasteners like the cheap offshore made tools that are so common in the bike world. They also won't rust into a ugly brown color after a season in a saddle bag. The next part of the multi-tool is the chassis, for this we used our favorite US drawn aluminum alloy and built a 4 position frame to hold the bits. At first glance the tool looks like it might be cumbersome but once you get it in your hand you realize how simple and effective the ergonomics of the tool are. Offering good leverage for all of the small fasteners on your bike, be it the precision adjustment of limit screws or adjusting the handle bars because you had one beer too many when you bolted them down late last night. Available in 5 pre-configured options or fully customizable to fit whatever mix of fasteners your bike requires. We suggest buying a tool for each of your bikes and leaving the tool stored away until needed. These little multi-tools are the result of a collaboration with fellow Bend OR residents, Argonaut Cycles and is the only American manufactured multi-tool for the bicycle market.
$144.00
We listened to your requests and created a socket style Crombie tool that is compatible with ratchets and torque wrenches. The Socket Crombie has our signature finger spline at the top along with a 3/8" square drive for using your favorite ratchet or torque wrench. The tool is plenty deep to hide a quick release and still get full engagement on the lock ring. Compatible with all Campagnolo cassettes.
$154.99
With thru axles becoming more and more common, the original Crombie tool was due for a makeover. We took the piloting pin and plus-sized it to work with the 12mm thru axle fitment that is actually standardized. We make this version as a dual-sided tool with two S Group ends, one for thru axle wheels and the other for regular hubs. The regular side has a hole deep enough to hide a skewer nut; it's really the best of both worlds. - Comes with a solid handle - Note: this version of the Crombie tool is not compatible with any Campagnolo wheels. - Dimensions: 9.625in x 1.0in
$202.00
The Charger 2 wrench is designed for use on the lower seal head of Charger 2 and Charger LT dampers. This series of wrenches comes as a result of our collaboration with RockShox to develop a series of tools specifically for their suspension components. Built to hold the thin aluminum parts of the dampers to avoid damage. These wrenches are built with the same tool grade aluminum to tight tolerances to give you years of trouble free use. They will not damage or mar the sensitive parts inside your suspension fork when used with care, keeping you and your customers happy. They also feature a 3/8" square drive in the middle to use with your favorite torque wrench during reassembly.
$202.00
The Reverb is an advanced and complicated component and service becomes a breeze with this speciality wrench. Designed for use on the inner seal head and upper collet of both 30.9 and 31.6 millimeter version of the Reverb dropper post. This series of wrenches comes as a result of our collaboration with RockShox to develop a series of tools specifically for their suspension components. Built to hold the thin aluminum parts of the dampers to avoid damage. These wrenches are built with the same tool grade aluminum to tight tolerances to give you years of trouble free use. They will not damage or mar the sensitive parts inside your seastpost when used with care, keeping you and your customers happy. They also feature a 3/8" square drive in the middle to use with your favorite torque wrench during reassembly.
$297.50
The unique thing about our Saw Guide is that the clamp is open, so you can slide it around the steer tube instead of having to slide it over the end. It doesn't sound like that big of a deal but it means you can get an accurate and square cut without taking the fork off the bike and more importantly without taking all the cables out of the bike. Use this tool once for that application and it's paid for itself. Of course it will work on normal steer tubes as well and give you a nice square cut every time. The guide is two sided, one side for standard toothed metal cutting blades and the opposite side is wider for abrasive blades used to cut composites. You can also use the guide in a vise like you're probably use to and it's pretty compact if you want to travel with it. Compatible with 1" and 1.125" steer tubes Currently not compatible with cutting handlebars!
$430.00
Many athletes are fortunate enough to be able to ride nearly anything. For those that are sensitive to bike fit though, replicating fit to a new bike or confirming fit after travel can be a challenge involving lots of trial and error. This set of tools allows accurate and repeatable measurements for saddle height, angle and setback. The accuracy and repeatable measurements also serve as a base to make adjustments to fit. -The magnetic saddle height bullets ensure you get an accurate center at the BB by locating in the crank arm fixing bolt or the crank arm preload cap of Shimano caps. This allows you to focus on the smart end of the tape measure at the saddle plate. -Two reference marks on the saddle plate means you can pull a measurement to the exact same spot relative to the nose of the saddle every time. This gives you accuracy down to a single millimeter. -The front of the saddle plate is engraved with a ruler, to allow you to calculate saddle setback at the saddle. This allows you to drop the plumb bob off the side of the bike and clear all of the bottle cages. -The wide plate has ample room to mount a level, protractor or smart phone for adjusting the angle of the saddle. This is particularly helpful for non traditional saddles like SMP and Adamo.
$514.99
Two years in the making, this chain tool is built to stand the test of time. The threaded body and lead screw are made from cro-moly and receive a low friction powder vapor deposition (PVD) coating to give it a silky feel you've never felt in a chain tool before. Large handles ensure ease of use with any chain. The freely rotating pin is made from a shock rated tool steel and will likely last as long as the rest of the tool. The chain tool comes with a spare chain pin in the handle and they are cross-compatible with Shimano and Campagnolo pins. The greatest part of the chain tool has to be the interchangeable mid plate. The saddled part that holds the chain in position can be swapped to work with nearly anything the industry comes out with. This ensures that your investment won't become obsolete when company "X" comes out with an 18-speed cassette in 20 years. The tool also peens Campagnolo 11 and 12 speed chains to factory specs using a backstop that threads into the backside of the tool as a stop. Compatible with 9-12 speed chain, including the new 12-speed chains from Campagnolo and Shimano's XTR 9100.
$6.00
Brake pad spreader tool for Avid Elixir brakes.
$139.99
SRAM Bleed Kit for maintaining SRAM disc brakes. Includes 2 syringes/fittings, bleed blocks, Torx tool, Crow's foot, and Bleeding Edge Fitting. - For SRAM X0/ XX/ Guide/Level/Code/HydroR brakes - Improved sealing and durability - New rotating metal hose fittings - High volume hose with clamp - Longer lasting - Must-have for all mechanics - NOT compatible with RockShox fork bleed kit - Brake fluid sold separately
$59.99
The Axle and Spindle Vise Insert is equipped with built-in magnets to hold the Insert in place during bench vise use, and features Ø5/9/10/12/15/21/25/36mm, 17-21 hex jaw openings compatible with axles, spindles, hydraulic hoses, and Birzman Lockring sockets.
$9.99
This item contains 10 replacement plugs for the Blackburn Plugger Tubeless tool (sold separately), a one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat.
$15.99
Essential tool in mini size An essential tool for modern riders with tubeless tires, road or dirt. The Mini Plugger is a quick, one-shot tire-plugging system with a tiny profile to easily store and access in pockets, bags, or packs. A self-contained rescue tool when and where you need it most. - QUICK FIX - No need to remove the tire, just quickly access your Plugger tool, repair the tire, inflate, and go! - 5 PLUGS - Includes 5 tire plugs, internally stored - LIFETIME WARRANTY
$24.99
Essential tools in mini size The Mini-Switch is an essential tool kit with a slim profile to easily store and access in pockets, bags, and packs. Outfitted with a technical bit offering appropriate for most performance-oriented bikes, in a tool bit platform that we are all used to using at home. - 6 TOOLS - Top six tools for most modern bikes. 3mm, 4mm, 5mm, 6mm, Allen bits and T25, T30 Torx bits - HEX BITS - Easy to switch out tools. A durable, time-proven, six-sided bit design - LIGHTWEIGHT - Extremely light and compact tool set that's unnoticeable while riding - LIFETIME WARRANTY
$39.99
Those guys who said "Tubeless tires never get punctures"? They lied. The Blackburn Plugger Tubeless Tire Repar Kit is a quick, one-shot tire plugging system for tubeless tires. It deploys in seconds to give a permanent fix for your flat. Mount it to your frame, tape it to your top tube, or strap it to your ankle like a shark knife. Just keep it close and it'll get you out of trouble. Pronto. - Stores ten plugs. - 27g tool only 47g tool with strap
$49.99
The Switch Tool has evolved. We've all heard "if it ain't broke, don't fix it", but what if riders just want to fix more things? Enter the Big Switch, the larger sibling to the hit Switch tool. This new, compact, and super functional tool kit includes essentials you’ll find on the Switch including T25 and T30 torx bits, 2.5, 3, 4, 5, and 6mm allen bits, and a flathead screwdriver. The Big Switch also features an 8mm hex tool, and a chain breaker. The chain breaker handle includes size 0, 1, and 2 spoke wrenches, a disc pad spreader and a Presta valve core tool. Individual T or L handle tools let you access tight places and give you more leverage on bolts and screws. Go ahead, fix everything. - 15 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm, and a flathead. - Pocket sized nylon carrying pouch includes a stash for your I.D., credit card, and cash. - 134g
$49.99
Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs
$59.99
Customize the Switch Wrap Bag and load it up with your favorite tools. - Compact design—despite its near-limitless functionality, the big switch ratchet tool (sold separately) fits compactly in your hand thanks to a well-thought-out modular design allowing for leverage within the confines of a portable nylon wallet. - Customizable—wrap almost anything you need and take it with you. - Features specific sleeves for an inner tube, a 20g C02 cartridge, 2 tire levers, credit cards, and cash (sold separately) - Weight: 3.52oz - Lifetime warranty
$59.99
Remember that time on the trail when your brake lever reach went out of whack? Unfortunately, your multi tool couldn't get out of it's own way to turn the adjustment screw. Blackburn's Wayside Multi Tool changes all of that. - Individual Hex Keys - The most common hex keys snap on and off the tool and can be used individually to be able easily reach and properly torque any bolt head. All keys feature a ball end. - Optimized Tools - The selection, length and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 19 functions - 200 grams / 0.44 lbs
$74.99
Imagine if you could bring a tool box with all the essentials you’d need for bicycle maintenance with you on every ride. Well then, stop dreaming: the Blackburn Switch Wrap is already here. Spec’d with their Big Switch multi tool, the Switch Wrap provides you quick access to everything you’ll need to fix just about anything that could go wrong on a ride. The Wrap features specific sleeves for an inner tube, up to a 20g CO2 cartridge, and a tire lever. And, it keeps the Big Switch tools at your fingertips. When opened, the tool kit hangs from your saddle so you can grab what you need without spreading it all on the ground, so lost tools will only exist in nightmares. Minimal. Compact. Secure. Convenient. The Switch Wrap. - 15 functions - Includes T or L handle wrenches. - Tool bits include: T25, T30, 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and a flathead. - Nylon carrying pouch features sleeves for 20g CO2 cartridge, tire lever and includes a stash for your I.D., credit card and cash. - Attaches to seat rails or to bicycle frame. - 186g
$79.99
Ride essentials. Going for a ride but don’t know what to pack? No problem; we’ve got you covered. The local ride kit offers up what you need to get home; and extra carrying capacity to bring along anything else. With a seatbag, mini pump, mini tool and tire levers, this little kit, bundled in a compact package, has all the tools you need to get out there and keep going. - Blackburn's Local Seat Bag (Medium) offers extra space to pack your tube, wallet, phone, or whatever you want - Blackburn Heist 6 Multi Tool provides a quality tool to make sure your bike is adjusted properly for your ride - Blackburn's Mountain AnyValve Mini-Pump comes equipped with their popular and proven AnyValve head, which works on Presta, Schrader, and Dunlop valves. - 2x tire levers
$19.99
Fact—tools make work easier. Free up that extra hand during tire stud installation with the Bontrager Tire Stud Tool, featuring a magnetized tip that securely holds the tire stud in place for a quick and easy installation. So grab a beverage of your choice, add some studs to your studdable tires, and ride through the winter's worst. Key features - Magnetized tip securely holds tire stud for easy installation - Use with Bontrager Tire Studs for installation on stud-ready tires
$39.99
Refined functionality The Bontrager Elite Multi-Tool combines smooth style with practical design. This elegant tool features a compact design that easily packs away yet provides all of the essential tools to keep your bike tuned and running smoothly. Key features - CNC-machined keys for lightweight durability - 2,2.5,3,4,5,6, and 8 hex along with Phillips, flat and T25 - Slim profile makes it easy to pack on any ride - Ultra-light aluminum alloy design
$49.99
A compact multi-tool that is designed for integrated storage in compatible Trek road frames. Compact and easily stowed The BITS Integrated Multi-Tool is a compact multi-tool that is designed for clean, integrated storage into compatible Trek road bike frames. The small but smart design features hex tools from 2-8mm along with a T25 Torx, and flathead screwdriver. The ergonomic design makes the tool as easy to use as it is to carry. Product details - Designed for secure integrated storage in the new Domane with storage door - CNC-machined keys for lightweight durability - 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver - Slim profile makes it easy to pack on any ride - Ultralight aluminum alloy design
$64.99
A compact, efficient way to hold flat fixing essentials so you can get back on the bike quickly. The Pro Flat Pack has everything you need to fix a flat and get back on the bike quickly in an aero, easy to grab package. This all-in-one kit provides essential items needed to fix a flat tire with additional pockets for money and ID, plus extra soft, padded materials to ensure you won't be bothered by the poke of a tool while it's stashed in your back pocket. - Tight fitting, stretch neoprene material zips open for easy access - All the items you need to fix a flat tire - Includes Air Rush Elite, CO2‚ inflator, two 16g CO2‚ cartridges, and a padded bag - Reusable hand insulation sleeve, vulcanizing patch kit - Room in the bag for ID, money, keys, and more
$69.99
A convenient all-in-one pack containing useful tire-change essentials. Flats happen. Make sure you're prepared with a Bontrager Flat Pack. Featuring the storage, inflation, and tire removal equipment you need to handle an emergency flat repair, this purchase also includes a coupon for a free Bontrager tube so you can get the right size for your bike and tires. Product details - Kit features everything you need to quickly fix a flat, including the seat pack - Includes Pro Small seat pack (non-QC) for quick and easy on-bike storage - Contents include: mini pump, three tire levers, and patch kit - Also includes coupon for a FREE Standard Bontrager Presta or Schrader inner tube
$79.99
Product details - A professional-grade tool developed in partnership with Knipex and made to last - 8"/200mm length provides high leverage with minimum effort - Made from heavy-duty steel and additional induction hardening for tough, continuous use - Made in Germany - Perfect for cutting cables, cable ties, and many other materials
$129.99
Product details - A professional-grade tool developed in partnership with Knipex and made to last - 7.5"/190mm length provides high leverage with minimum effort - Made from heavy-duty steel and additional induction hardening for tough, continuous use - Made in Germany - Features an integrated class-leading crimper for cable end caps and housing ferrules
$56.00
Everything you need to keep your Penthouse Flat MK5 pedals feeling like new. Includes: - Small Bushing and Bearing Removal Tool - Small Bushing Press Tool - Big Bushing Press Tool - Bearing Press Tool
$30.00
- Spare pin for UT-CN200 and UT-CN300
$24.99 - $26.99
When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.
$52.49
Service Kit for servicing your eeSilk or eeSilk+ seat post. The kit includes bushings for the arms and the tool to remove and install the bushings. Instructions included.
$69.99
Allows safe installation and removal of Cane Creek Double Barrel bushings.
Page 1 of 14 Next page