Parts & Accessories

Leave the mud behind! With Bivo's all new Dirt Cap, you can be sure the clean Bivo taste won't get stuck in the mud. Going for a ride in dusty, dirty, muddy conditions? Toss on Dusty the Dirt Cap to any of their bottle nozzles, and enjoy your favorite taste without any unwanted ingredients. The flexible silicone allows for quick and simple installation. Simple satisfaction Utilizing a simple design and high quality silicone, Dusty the Dirt Cap provides the protection you need without compromizing nozzle funtionality. It can easily be popped off for a drink with the flick of your thumb and secured back in place with one hand. Weighing in at just over 4 grams, this little companion punches well above its weight.

The removable dirt cover for the TWIST bottle 450, 590, 750 and 800 for retrofitting, because water simply tastes better without mud.

The Shower Valve can be put onto all Ortlieb water containers. Remove the dust cap, put on the shower valve, and open the tap. The contents of the Water Sack are enough for a pleasant shower. Can also be used as a garden shower or watering can. - Shower Valve for all Ortlieb Water Sacks, Water Bags and Water Belt from models 1999 on - The Shower Valve is placed under the small cover cap onto the threaded connector instead of the dust cap - Simple metering of throughput by turning the shower valve - Ideal combination with the black 10L Water Sack or Water Bag as solar shower (check the water temperature prior to use - water might be too hot resulting in burns) - Can be used for watering flowers or for washing dishes - For water transport: remove the shower cap, cover the valve with the dust cap and firmly close the valve

Hydration isn't a crime. Add a third water bottle to you bike! PRODUCT DETAILS - Includes hardware - Cage and bottle not included

Colorful tethers for personalizing your Chute Mag bottle. Features: - Easy Upgrade: Includes 5 Chute Mag cap tethers: Green, Black, White, Blue and Purple - Stay Connected: Tether connects spout cap to main cap - Universal Fit: Fits all Chute Mag bottles

Ortlieb O-Strap Adjustable Rubber Strap - 190mm - Black - Soft material keeps items secure and helps prevent scratching

CamelBak's Big Bite Valve mouthpiece offers hands-free hydration and is ideal for any application. And, it's remarkably drip resistant.

CamelBak's Big Bite Valve Cover keeps your bite valve clean. Put it on your valve for storage or while traveling and your bite valve will stay just the way you left it.

Upgrade your Tritan or Vacuum Insulated Stainless vessel with a new magnetic top in black or grey. Features: - Universal Cap: Compatible with Tritan and Vacuum Insulated Stainless - Easy Upgrade: Includes 1 Chute Mag Cap and 1 Chute Mag Cap tether - Dishwasher Safe: All parts are top-rack dishwasher safe - BPA, BPS & BPF Free: Taste your beverage, not the cap

CamelBak's Ergo HydroLock controls your fluid flow with the flip of a switch. Turn it on to drink, turn it off for added security during transport. Simply insert it into the end of your CamelBak drinking tube and attach the valve to the other end. Plus, the 90-degree bend makes sipping on the go a cinch!

A replacement bite valve for your Quick Stow flask. The one-piece silicone design delivers rapid hydration and self-seals to eliminate annoying leaks and drips. Features - Patented one-piece silicone design - Bite valve self-seals to eliminate annoying drips - Fits only Quick Stow flasks - A great foldable and lightweight hydration accessory - Self-seals to eliminate annoying leaks and drips

- Perfect finishing touch to a bike built - 7075-T6 aluminum - M5 x 15mm - 4Nm max torque - For water bottle cages only. - Never use these aluminum bolts in a structural application.

45-degree bite valve for Leatt hydration reservoirs.

Straight bite valve for Leatt hydration systems.

Dry your reservoir quickly with the CamelBak Reservoir Dryer.

Adapter for direct mounting of the Fuel Pack or other equipment with screw connections. Are you planning to mount the Fuel-Pack or a bottle holder on your bike but find the threaded holes are not in the right place? The Offset-Plate 64 MM gives you a flexible way of adjusting the position of the Fuel-Pack, a bottle holder or other equipment with screw connections.

Make quick work of any bottle-cap-removal operation with Park's BO-2 Bottle Opener. This ergonomic tool is made of stainless steel with a comfy vinyl coating.

Replacement straws and bite valves make your eddy water bottle work like new.

This metering valve valve cap fits Ortlieb water containers (up to model year 1999). Add a valve to an Ortlieb water container. Twist the valve to control the amount of water flow.

The Crux reservoir on/off valve pairs with CamelBak's Big Bite valve and tune. Using an integrated valve, water flow shuts off for added security during transport.

Alt-Position Cage Mounts provide an alternative way to raise or lower your water bottle cages when they are assembled on rear hydration devices for you to comfortably mount or dismount your bike. They also provide mounting location options for Topeak Ninja Bottle Cages and allow use of different Ninja bottle cage series combinations on smaller frames and tighter spaces. - Material: Aluminum - Compatibility: Topeak TRI-BackUp Elite series, Omni-BackUp Elite, Topeak Ninja bottle cage series - Size: 10.8 x 1.2 x 9cm / 4.3" x 0.5" x 3.5" - Weight: 25g / 0.88oz (1 pc w/ 4 bolts)

SKS's Cage Box offers light, simple storage for your on-the-go essentials. With enough room for your tools, mini pump, and a tube, the Cage Box slides easily into your water bottle cage for a rattle-free, easy access storage solution.

The grab-and-go Carry Cap twists to open and fits all Eddy+, Pivot Bottle, Chute Mag, and Hot Cap vessels. Includes one black Carry Cap. Easy to clean and BPA, BPS, and BPF free.

Our improved bite valve design delivers 25% more flow. The universal cap is leak-proof when closed and spill-proof when open, features an easy carry handle, and is compatible with Chute Mag and Hot Cap vessels.

No tipping-just flip, bite, and sip. eddy+ Kids Cap Accessory is spill-proof when open, leak-proof when closed. Compatible with Eddy Kids and eddy+ Kids vessels. Includes one black Eddy+ Kids cap with clear bite valve and straw. Top rack dishwasher safe and always BPA, BPS, and BPF free. Recommended for ages 3+.

Like to squeeze your bottle to get as much water as fast as possible? The Leatt DuoValve will quickly become your go-to bottle. The dual valve construction combines a high-volume self-sealing spout with an anti-vacuum valve that equalizes internal pressure to reset the bottle faster for your next squeeze. Main Features: - Spout can be closed for extra protection while traveling - Easy to disassemble for cleaning - TasteRight plastic is odorless and without aftertaste - The wide fill opening makes it ice-cube friendly - Available in 600ml and 750ml versions - Weight: 58.5g (600ml) / 64.8g (750ml)

Don't just drink, chug. When the sun is glaring down and the day is heating up, it takes more than just a sip to stay hydrated. This 2-pack of Chug Spout lids will help you tranform nearly any of our water bottles into a hydration station capable of keeping you cool and comfortable no matter how high the temperature rises.

Our Thrive Bite Valve and Straw 2-Pack means you never have to decide between sipping on-the-go, or staying hydrated all day long.

Don't let your lid slow you down. Our Thrive Chug Accessory Cap provides high-water flow at a moment's notice, so you can hydrate in seconds without spilling a drop.

Just flip and sip. Our Thrive Flip Straw Accessory Cap is one of our easiest, most streamlined ways to stay hydrated yet.

Now you never have to decide between on-the-go hydration and a more comfortable way to sip all day long. Our Thrive Flow Valve and Straw 2-Pack is the perfect solution for all your hydration needs.

Replacement bite valve for Leatt hydration helmet kits.

Storage strap kit for Profile Design's Rear Mount Carbon Water Bottle Cage - Compatible with standard 7mm saddle rails

The Replacement Activated Carbon Filter is compatible with the Crux 2L Reservoir Filtration Kit filtered by LifeStraw or the Reservoir Filter Kit accessory. Chlorine is reduced and bad odor and taste are removed when paired with an existing Hollow Fiber Filter and used as part of the two stage LifeStraw filtration system.

Increase the easy-drinking nature of your Quick Stow Flask with this tube adapter.

The revolutionary Fidlock Tube Clip is the next evolution of hydration bladder management. It provides an innovative magnetic and mechanically locking attachment method for hydration tubes on backpacks and hip packs. With its patented system, the Tube Clip combines function with minimalist design. Installation is simple: The magnetic mechanical fixture is attached to the backpack or hip pack strap, and the opposing piece to the hydration reservoir hose.

Keep your water bottles clean and free of mysterious foreign objects. The CamelBak Bottle Brush Kit includes a large brush for scrubbing the inside of your bottle as well as small straw brush for cleaning the straw, cap, and bite valve.

Top off your CamelBak water bottle with Pak Cap's hidden hauling capability. Conveniently store snacks, vitamins, or any other small essentials in the top half of the twist-to-open cap. Leak-proof when closed and easy to clean. Compatible with MultiBev, ChuteMag, Eddy, Carry Cap, and Hot Cap vessels.

We've got a new tip for all you sippers out there: Say good-bye to single-use straws, forever. The durable, reusable Straw Tumbler Lid supplies a soft straw port seal for reliable slurping from home to destinations known and unknown. This medium-sized Straw Tumbler Lid is ready to give you a splash-resistant, crystal clear, shatter-proof fit for our medium Tumblers and Mugs.  

The splash-resistant tumbler lid features tri-mode flow control and is spill-resistant when fully closed. Durable and easy to clean. BPA, BPS, and BPF free. Features - Spill resistant: Tri-mode slider for flow control - Durable: Shatter-proof, odor and stain resistant. Dishwasher safe - Drink Clean: BPA, BPS, and BPF free

The Replacement Activated Carbon Filter is compatible with the Crux 2L Reservoir Filtration Kit filtered by LifeStraw or the Reservoir Filter Kit accessory. Chlorine is reduced and bad odor and taste are removed when paired with an existing Hollow Fiber Filter and used as part of the two stage LifeStraw filtration system.

Keep your reservoir funk-free with this cleaning brush kit from CamelBak.

Lezyne's Flow Caddy is a lightweight, rigid container that fits into any Lezyne and most other bottle cages, and serves as universal storage for a patch kit, multi-tool, extra tube, or phone. The Flow Caddy features a large opening which provides quick and easy access to contents and a secure screw-top. The labeled organizer secures and organizes your gear.

The CamelBak Crux replacement tube has larger diameter and offers more water per sip than previous tubes. Pair with the Crux reservoir on/off valve (sold separately) for 20% more water flow per sip.

Keep your tube close and hydration on-tap with the Magnetic Tube Trap.

Flexible option for fastening additional bottle holder or other accessories to the bike frame. Are the holes in your bike frame in the wrong place or already in use? Using the O-Strap Bottle Cage Mount, you can additionally attach bottle holders or other items of equipment wherever you want them. This practical accessory is suitable for tubes of up to 60 mm diameter, whether on the frame or other parts of your bike.

Replace that old bite valve! CamelBak's Big Bite Valve mouthpiece slip on easily and add some color to your hydration. And, they're remarkably drip resistant.

Featuring a three-color Park Tool logo and "bike wrench" graphic, Park Tool's Pint Glass is made from heavyweight, dishwasher-safe glass.

Keep your reservoir free from taste and odor and ready for your next adventure. Fast-acting tablets are easy to use and work in just 5 minutes. - Periodic cleaning with CamelBak Cleaning Tabs keeps reservoir and tube free from taste and odor - CamelBak Cleaning Tabs work in just 5 minutes for a thorough cleaning - 8 Cleaning Tablets Per Pack.

An essential accessory for any camper or outdoor enthusiast, the Reservoir Gravity Kit clicks into place with ease to convert the Crux 2L Reservoir Filtration Kit into a gravity bag. The Gravity Kit includes a U-shaped tube that connects the reservoir to the filter in a downward orientation via the easy-to-use Quicklink system. A secondary tube extends from the filter body and has an on/off valve allowing for steady flow water delivery. Hang the fully assembled reservoir and allow gravity to provide reliable and clean drinking water.

The ultra-light hydration sidekick for all of your adventures. The Skratch Labs Hydrapak Softflask 250ml Tall is sized just right for your jersey pocket, frame bag or top tube bag. This little wonder is about to become your new best friend. Let’s dive into why you need this in your life. Pocket Perfect: Ever tried stuffing a hard bottle into your jersey pocket? Yeah, not fun. Our 250ml Softflask is like the Goldilocks of hydration – not too big, not too small, just right. It fits snugly in your jersey without that awkward bulge, so you can ride like the wind. Lightweight & Squeezable: No one wants to carry extra weight on a climb. The Softflask is feather-light and super squeezable, making it a breeze to hydrate on the go. Bite Valve Cap: High-flow bite valve which auto-seals after each sip and includes a twist locking cap for added security. Easy to See and Clean: Hydration gear that’s a pain to clean or hard to tell if it's got something growing in it? No, thank you. Just pop it in the dishwasher or give it a quick hand wash. Durability Meets Flexibility: Crafted from ultra-durable TPU, this flask can take a beating and still bounce back for more. Flexibility meets toughness – just like you. Keep It Cool: Want your drink to stay cool? Fill it, freeze it, and enjoy icy-cold sips on your ride. Trust us, your taste buds will thank you. PS. Skratch don’t recommend freezing a highly concentrated flask of High-Carb Drink Mix - normal ratio or their other mixes are fine. BPA & PVC Free! Made by HydraPak

This new adapter can be utilized to move your bottle cage up or down to make better use of the space available on any bike. Simply attach to the existing bottle cage mounts to allow up to 55mm of vertical adjustment. The adapter is most effective at creating space when combined with side entry bottle cages and is compatible with all two and three bolt cages. It also turns double bosses on forks into a triple mount suitable for securing fork cages, as well as increasing carry options on the underside of the down tube. - Precision crafted from AL6061-T6 - Includes (x3) M5 x 7mm stainless bolts - Corrosion-resistant anodized finish - 22g (excluding bolts)

The TWIST bike base adapter is mounted underneath the TWIST bike base to the bottle braze-ons: Thanks to the slotted holes, the adapter allows the base to be moved an additional 26.5 mm both upwards and downwards. -Adapter for shifting the TWIST bike base -For mounting between bike frame and TWIST bike base on the bottle braze-ons -Gains additional 15 mm space in each direction -Dimensions: 105 x 15 x 6 mm (LxWxH) -Including four screws for mounting -Aluminium, black anodised

Aqua Cell replacement parts kit for use with the Profile Design Aqua Cell hydration system. - Kit includes straw, extra mesh, bottle tops, and rubber bands

The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

Keep your handlebar organized and your devices secure with the SGS-400-STD (22.2/25.4/28.6mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 22mm-29mm diameter

Keep your handlebar organized and your devices secure with the SGS-400-OS (27.2/31.8/35.0mm) from Minoura. - Holds up to 2 accessories (light, computer, mp3, bottle cage holder, etc.) - Lightweight and rustproof alloy construction - New LW-Clamp reduces weight 25 grams compared to previous models - Aluminum bar is position adjustable and uses Hex Bolt to install and remove - 27mm-35mm diameter

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Stash it in your running vest, belt, or even in the palm of your hand. This lightweight, collapsible flask features our classic one-piece silicone bite valve for rapid hydration on race day, and packs down easily once it's empty. We designed the Quick Stow to fit easily in the front compartments of all of our running vests. Once it's empty, it folds down small enough to fit in your pocket. - Bite valve self-seals after each drink, eliminating annoying drips - Empty flask collapses and folds ultra-compact to fit in most pockets - All parts top-rack dishwasher safe - Volume indicators in ounces and milliliters for tracking hydration and adding electrolytes - Hang flask upside down for easy drainage and drying

Thanks to the modular TWIST system an exchange of the single parts is done in no time. If base and replacement bottle are still at hand, the TWIST bottle connector is also available separately. The bottle connector is suitable for all TWIST bottles with a belt as well as TWIST bases. Fitting the new connector is simple: insert the connector into the recess of the TWIST replacement bottle and lock with a coin. - Suitable for all TWIST bottles with a belt - Fits all TWIST bases