Skip to main content

Filter By:

  • Show More Sizes
  • Show Fewer Sizes

Parts & Accessories

Yakima Holdup Wheelstrap
$7.99 $9.99 20% Off
Replacement Wheelstrap for Holdup. Adds 2.5" of Length to Forklift and Frontloader Rear wheel mounts.
Yakima RidgeClip
$149.99
Tailored to precisely fit flush-mount factory side rails, RidgeClips secure the RidgeLine Towers to your aerodynamic rooftop. Created in different designs to fit specific vehicles, they have a brilliant clip design that’s super strong, easy to install, and holds on tight. - Ingenious clips designed to attach RidgeLine Towers to flush-mount factory side rails - Range of shapes lets you find the precise, secure fit specific to your vehicle - Unique inner and outer clip design delivers exceptional hold - Powder-coated stainless steel provides maximum strength and durability - Sold in sets of four – just one kit sets up your system
Yakima Single SKS Lock Core
$24.99
SKS stands for "Same Key System." These types of cores enable you to lock all your Yakima products with just one key. When replacing a core on your Yakima product, you may need a Control key to remove your existing unlocked core so you can transfer the core to a different Yakima product.
Yakima Single SKS Key
$9.99
Includes a single SKS key.
Yakima SkyLoft
$64.99
A camping necessity, the SkyLoft holds the small, important stuff you always need, keeping them off the floor and right in reach. Clip it inside your SkyRise tent for easy access to headlamps, smartphones, and late night snacks. When you wake up, take it outside with you and slide it into the SideTrack on your SkyRise to stow jackets, towels, and toys. The mesh material allows you to see your stuff, and the generous 40" x 17" dimensions provide plenty of room. Two zippered pockets give you even more storage options, you can even use one of them to store the SkyLoft when it's time to break camp. Product Details: - Hanging storage net for the SkyRise tent helps keep your camping gear organized - Clips inside your SkyRise’s roof with adjustable straps so your late night essentials are easy to find and out of the way - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to stow daytime necessities, like cooking supplies and treats for Fido - See-through mesh material makes it easy to find what you’re looking for - Two zippered pockets add security and organization and, one doubles as a storage pouch for your SkyLoft when not in use - Measures a generous 40” x 17” to handle enough gear for two or three Product Specs: - Weight: 0.65 lbs - Dimensions: L 40.00" x W 17.00" x H 0.50"
Yakima SKS Lock Cores (4-Pack)
$99.99
Yakima SKS (Same Key System) Lock Cores secure all lockable Yakima rack systems, cargo boxes, and accessories. It's your gear, keep it that way. - Fits all lockable accessories - Includes 4 SKS Cores and matching keys - 2 keys included plus a control key
Yakima Accessory Lock Housing
$34.99
Make just about any accessory lockable with an SKS accessory housing. Use with bike, boat or BasketCase accessories that don't accept SKS lock cores. SKS lock cores sold separately. - Lock rack accessories to your vehicle's crossbar - Use with bike, boat, and BasketCase accessories - SKS Lock Cores sold separately Product Specs: - Weight: 0.20 lbs. - Dimensions: L 4.00 in x W 3.25 in x H 1.00 in - Limited Lifetime Warranty
Yakima K450 Fitting Kit
$149.99
Fitting Kits are designed to work with the FlushBar system to provide an integrated, custom installation for each vehicle. - Includes all hardware, base pads, and tool for installation - Complete set of 4 base feet for FlushBar
Yakima BaseClip
$74.99
Tailor your towers—these super-strong clips come in a wide range of sizes and designs so you can precisely fit your BaseLine Towers to your car’s bare roof.
Yakima JetStream EndCaps
$9.99
Pair of EndCaps for Yakima JetStream bars.
Yakima FrontLoader Tensioning Handle
$9.99
Tensioning handle for FrontLoader universal bike mount. Includes one handle.
Yakima 8 Hole Chainstraps
$14.99
Chainstraps for a multitude of rear of car bike racks.
Yakima 86
$19.99
End caps for 86" Cross Bars. Includes four end caps Please note these end caps are specific to the 86" cross bar.
Yakima Sidewinder Strap Pad
$13.99
Spare part for SideWinder
Yakima SkyLine Towers
$159.99 - $279.99
Roll your own way – the SkyLine Towers work with our Landing Pads to create a customizable, mega-versatile, super easy-to-use system that easily handles your unique personality and extensive range of gear. - Complete SkyLine Tower set - Secure and simple – may be the easiest-to-use rack system out there - Fits all styles of Landing Pad (required) - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - BarBed has 12° of pitch adjustment to optimize tower position and level bars on roofs with curved flush rails - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating TECHNICAL SPECS - Weight: 1.00 lbs - Dimensions: L 4.50” x W 4.50” x H 3.00”
Yakima Control Key Single SKS
$9.99
The control key is "uncut" and is used only for the removal and installation of an unlocked SKS core. Product Specs: - Weight: 0.02 lbs. - Limited Lifetime Warranty
Yakima Landing Pad 21 (Set of Four)
$259.99
This low-profile custom-install solution delivers up to a 220-lb. load capacity. It's a great choice for most any naked roof vehicle with a roof ditch. Combine with SkyLine Towers and any Yakima crossbars to create a roof rack system ready for a wide selection of gear mounts, including a roof top tent. Product Details: - Permanent installation into the roof ditch for up to a 220-lb. load rating. - Designed for use with our SkyLine towers paired with any Yakima crossbar. - Yakima's patented Landing Pad design for quick and easy tower installation and removal. - Includes snap-on covers for when the rack is removed. - Choice of two pad shapes lets you create the perfect fit. - Stainless steel rivets for superior strength. - Includes four Landing Pads and necessary hardware (see instructions for required list of tools) - Vehicle must have compatible roof ditch for proper instillation (see instructions for fit parameters) - Some assembly required,10 minute install Product Specs: - Weight: 2.57 lbs - Dimensions: L 7.00in x W 2.00in x H 1.50in
Yakima SkyHook
$39.99
The SkyHook gear hangers easily mount to your SkyRise rooftop tent to keep you organized at your campground. The simple to use carabiners slide into the SideTrack on the outside edge of the SkyRise floor to keep gear at an arm's length and off the ground. Sold in packs of four, each carabiner is supported with a nylon strap rated to handle up to 50 pounds. Jackets and wet towels, day packs and dry bags - whatever it is, the SkyHooks have got you covered. Product Details: - Hanging storage hooks for the SkyRise tent keep your camping gear organized - Slides into the SideTrack on the outside edge of the SkyRise base and hangs down below the tent floor to easily hold camping necessities - Yakima carbine attachment hook is secure, strong, and easy to use - Strong, durable nylon strap attached to each carabiner can support 50 pounds of gear - Sold as a pack of four Product Specs: - Weight: 0.48 lbs - Dimensions: L 6.00" x W 1.60" x H 0.50"
Yakima SmarT-Slot Kit 1
$39.99
Take your HighSpeed or HighRoad bike mount to the next level with the SmarT-Slot Kit 1.This hardware kit replaces the standard mounting hardware to enable direct attachment of your bike mount into a T-slot channel on your crossbar. It works with Yakima JetStream crossbars as well as most other T-slot crossbars on the market. - Includes T-slot hardware, covers, and install tool. - Designed to work exclusively with Yakima HighSpeed and HighRoad bike mounts. - Compatible with Yakima JetStream bars and most other T-slot style crossbars. Product Specs: - Weight: 0.25 lbs. - Dimensions: L 2.75 in x W 1.50 in x H 0.50 in - Limited Lifetime Warranty
Yakima Bow/Stern Tiedowns
$64.99
Make carrying your boat highway safe with these bow/stern tie downs. Forget about tying knots, these tie downs feature handy ratchet pulleys that are easy to use and are corrosion resistant. They're also great for securing non-nautical loads like ladders or lumber. - Secures the bow and stern of any boat - Best in class corrosion resistance - Clear plastic tubes protect your vehicle from damage
Yakima Felt Pads (Sweetroll/ Hullhound)
$29.99
These durable, easy to install felt pads are custom shaped for SweetRoll and HullHound and provide additional protection for your boat. Sold as pairs.
Yakima Fat Bike QR Locking Skewer
$64.99
A locking QR skewer for Fat Bikes with 9mm x 135mm axles. Includes a locking skewer with sleeve for use with HighSpeed and additional adapters for ForkChop. Product Details - Durable stainless steel axle and body - Easy to adjust end nut and cam lever - Lockable with a SKS lock, sold separately - Includes 9mm x 135mm threaded adapters for Yakima ForkChop - Includes 135mm sleeve for use on Yakima HighSpeed Product Specs - Weight: 1.15 lbs - Dimensions: L 9.50" x W 3.50" x H 1.25"
Yakima Landing Pad 23
$149.99
Custom Landing Pads to install directly to the factory mounting points on flush rails of the 2015 - 2019 Subaru Outback. Combine with SkyLine Towers and StreamLine crossbars for a full-featured Yakima base rack, significantly increasing cargo capacity over the factory crossbars. Product Details - Seamlessly combines with SkyLine Towers, the easiest-to-use rack system on the market - Complete set of 4 Landing Pads with no additional tools required - 33" crossbar spread allows most Yakima gear mounts - Snap-on covers to keep the elements out while the rack is removed - Weight: 1.35 lbs - Dimensions: L 5.50 in x W 1.50 in x H 2.75 in
Yakima Bolt TopLoader
$154.99
A permanently mounted bracket that allows 1A Raingutter Towers or Q Towers to be used in some situations where no raingutters exist. Installed with carriage bolts, washers, and lock nuts. - Stainless steel hardware included - If you are attempting to use QTowers and our bolt top loader for your vehicle you will need a pair of Q41 clips, sold separately. - Sold as pairs Product Specs: - Weight: 1.00 lbs. - Dimensions: L 7.10 in x W 2.50 in x H 0.75 in - Limited Lifetime Warranty
Yakima CoreBar EndCaps
$9.99
Pair of EndCaps for Yakima CoreBar.
Yakima LockNLoad Perimeter Rail Kit K (for 55x49)
$349.99
Amp up the utility of your LockNLoad platform rack with this set of versatile, heavy-duty aluminum perimeter rails to help secure and tie down your load. The rails also feature a convenient side channel for mounting Yakima T-slot attachments. Each kit includes a pair of front/rear rails, and a pair of side rails that easily install in the channels along the perimeter and inner slats on the platform. Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. Product Details: - Loads can be secured, braced against, and/or tied down to perimeter rails. - Integrated T-slot in the perimeter rails makes it easy to attach your Yakima T-slot accessories. - Sold in sets of 4 rails (2X right/left side rails and 2X front/rear rails). - Heavy-duty hardware features a durable black-zinc coating. - Designed and thoroughly tested in the rugged Australian Outback to meet Yakima's new Off-Road Rated standards. - Fits most other T-slot equipped platforms (please verify your platform's size and compatibility before purchase). - Easily installs in minutes. - Weight: 15.40 lbs - Dimensions: L 37.00in x W 1.50in x H 3.50in
Yakima LockNLoad Crossbar Clamps
$64.99
Use these clamps to attach the LockNLoad platform to an existing Yakima roof rack, factory rack, or other aftermarket roof-rack system. One pair of clamps is required for each crossbar. Check your vehicle fit to verify requirements. Product Details: - Sold as a set of 2 clamps, with included hardware to attach to a single crossbar. - The LockNLoad platform requires 2 or 3 sets of Crossbar Clamps (check your vehicle's and platform's fit requirements for the number of crossbar clamps needed). - Welded steel construction for strength. - Rubber pads protect crossbar finish. - Compatible with all Yakima crossbars, along with many other aftermarket crossbars, factory crossbars, and 2" round or square tubing. - Each set of crossbar clamps adds 110 lbs. of weight capacity, up to 330 lbs., when used with 3 sets of crossbar clamps. Never exceed the Yakima- or manufacturer-specified weight limit for your vehicle. Product Specs: - Weight: 1.86 lbs - Dimensions: L 2.75in x W 1.80in x H 1.00in - Some assembly required, 15 minute install
Yakima OffGrid Accessory Bar
$69.99
Add an additional OffGrid Accessory Bar to custom fit those bulky items in your OffGrid cargo basket. Pin in those coolers, tackle boxes, and duffels to ensure a secure fit for the long haul. Fits Large OffGrid only. Product Details - Accessory Bar for Large OffGrid cargo basket - Quickly attaches to basket frame to help organize bulky items - Mount Yakima gear mounts on top for a true multi-sport adventure - Made from durable, steel for years of rugged use - Compatible with Large OffGrid basket only - 10 Minute Install Sizing: - Large: Weight: 3.43 lbs, Dimensions: L 49.00" x W 1.12" x H 1.12" - Medium: Weight: 2.68 lbs, Dimensions: L 40.00" x W 1.12" x H 1.12"
Yakima BaseLine Towers
$279.99
No rails? No problem. The versatile BaseLine’s intelligent design and advanced adjust ability help it morph to the shape of your car’s roof for a sleek, secure, load-it-up fit. - Secure, easy-to-use tower specifically designed for cars without roof rails or gutters - Advanced tower architecture is sleek, strong and quiet - Works with JetStream, CoreBar and RoundBar crossbars - Tri-axial DropHook clip adjustment easily adjusts to a wide range of roof shapes for safe, secure hold - BarBed has 12° of pitch adjustment to optimize tower position and level bars on rounded roofs - Super-simple installation – tool included - Maximum load rating of 165lbs (75kg), depending on vehicle and bar rating - Easily locks to you vehicle with our SKS system (sold separately) - RoundBar SL Adapter required to use Yakima's classic RoundBar with - StreamLine System Towers (sold separately) - Streamline crossbars are compatible with any StreamLine Tower StreamLine Tower TECHNICAL SPECS - Dimensions: L 5.00” x W 6.00” x H 4.00”
Yakima MightyMount 39H
$49.99
Product details: - Durable and flexible nylon adapters designed specifically for CORE and JETSTREAM crossbar shapes - Allows most RoundBar style mounts to attach in minutes - Tool free installation - Sold as a set of 4 - Compatible with HighRoller, Raptor, WheelFork, HullyRollers, Mako Saddles, KayakStacker, Multimount, Accessory Lock Housing, and Basketcase
Page 1 of 3 Next page